This product is out of stock
If you would like to be emailed when this product becomes available, please click hereHewlett Packard Enterprise
HPE 620 - power supply redundant - 1440 Watt
Image
images for illustration purposes only, actual product may differ.
MPN: J8696A QuickCode: 274989Basic Specification
-
Product DescriptionHPE 620 - power supply - redundant - 1440 Watt
-
Device TypePower supply - redundant - external
-
Weight6.9 kg
-
Power Capacity1440 Watt
-
Dimensions (WxDxH)44.2 cm x 39.1 cm x 4.4 cm
-
Designed ForHPE 3500-24G-PoE yl Switch, 3500-48G-PoE yl Switch, 6200-24G-mGBIC yl Switch, Switch 2900-24G, Switch 2900-48G
-
Full Specification
General
-
Device TypePower supply - redundant - external
Power Device
-
Input Voltage RangeAC 100 - 127 / 200 - 240 V
-
Frequency Required50/60 Hz
-
Power Capacity1440 Watt
Environmental Parameters
-
Min Operating Temperature0 �C
-
Max Operating Temperature55 �C
-
Humidity Range Operating15 - 95%
Dimensions & Weight
-
Width44.2 cm
-
Depth39.1 cm
-
Height4.4 cm
-
Weight6.9 kg
Compatibility Information
-
Designed ForHPE 3500-24G-PoE yl Switch, 3500-48G-PoE yl Switch, 6200-24G-mGBIC yl Switch, Switch 2900-24G, Switch 2900-48G
-
HPE 620 Redundant/External Power Supply
The E620 Redundant/External Power Supply provides redundant system power and/or an extra 398 W of Power over Ethernet (PoE) power for each of two supported switches simultaneously. Ideally suited for Voice over IP (VoIP) environments, the E620 provides the RPS and extra PoE power needed in many other common customer environments where high power availability is desired. Switchover from a failed internal power supply to the 620 is seamless and immediate. In addition, the 620 can protect against a single power main failure by being connected to a different power main than the switch. The 620 supports the HP E3500 Series, as well as E6200 switches.
Media
- Independent RPS and EPS ports: two RPS ports provide system power for up to two switches simultaneously and two EPS ports provide PoE power for up to two switches simultaneously
- Supports a number of HP E-Series stackable switches: Redundant power supply (RPS): provides full redundant system power (RPS) support for the HP E2900 Series, E2910 Series, and E3500 yl Series, as well as E6200 yl switches. External power supply (EPS): provides an additional 398 W of PoE (EPS) power to the HP E3500 yl Series.
- Cables included: includes four 2-meter RPS/EPS cables; cables can be used to carry RPS power or EPS power to the connected switch; no extra cables are needed for a complete solution
Specifications
| TechnicalSpecifications | |
|---|---|
| Form factor | 1U height |
| Management features |
Unmanaged power supply provides information via LEDs (LEDs repeated on front and back panel) or through port interfaces of attached devices |
| Input voltage | 100-127 / 200-240 VAC |
| Technical notes | The ProCurve 620 supports the HP ProCurve Switch 2900 Series (RPS) and 3500yl Series (RPS/PoE), as well as 6200yl (RPS) switches. The HP ProCurve Switch 5400zl Series is not supported.The ProCurve 620 includes four 2 m RPS/EPS cables. These cables can be used to carry either RPS or PoE power to the switch being powered. |
| Operating humidity range | 15 to 95% @ 104°F (40°C) (noncondensing) |
| Storage humidity | 15 to 90% @ 149°F (65°C) (noncondensing) |
| Operating temperature range |
0 to 55°C 32 to 131°F |
| Minimum dimensions (W x D x H) | 39.12 x 44.2 x 4.39 cm |
| Weight | 6.89 kg |
-
Description
Information technology professionals rely on HP quality to ensure maximum productivity. As the power of applications, processors, memory adapters and storage devices increases, high-end computer users are seeking ways to optimize their system performance. HP provides leading solutions, adding new levels of performance, availability, flexibility, and management. -
Product Features
- Additional information
Independent RPS and EPS ports: two RPS ports provide system power for up to two switches simultaneously and two EPS ports provide PoE power for up to two switches simultaneously.
Supports a number of HP E-Series stackable switches: Redundant power supply (RPS): provides full redundant system power (RPS) support for the HP E2900 Series, E2910 Series, and E3500 yl Series, as well as E6200 yl switches. External power supply (EPS): provides an additional 398 W of PoE (EPS) power to the HP E3500 yl Series.
Cables included: includes four 2-meter RPS/EPS cables; cables can be used to carry RPS power or EPS power to the connected switch; no extra cables are needed for a complete solution.
- Additional information
-
Key Selling Points
- Independent RPS and EPS ports: two RPS ports provide system power for up to two switches simultaneously and two EPS ports provide PoE power for up to two switches simultaneously
-
References
Model: J8696A
MPN: J8696A
- MPN J8696A
- Quickcode 274989
- Qty Available 0
This product is currently not available, please check again later
- Buy 2 for £1,769.34 + VAT each
- Buy 3 for £1,764.94 + VAT each
- Buy 4 for £1,760.54 + VAT each
- Buy 5 for £1,756.14 + VAT each
- Buy 6+ for £1,751.74 + VAT each
Shipping
- 3 Working Days: £4.98
- 7 Working Days: Free *(over £100) Exceptions Apply
- Collection: Free
- All Delivery Prices inc VAT
- 7 Day Free, Next day and 3 Day delivery are only available to UK mainland addresses, this excludes: Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.
Buying for Business?
Call Now: 02477 710171
Or Email to: trade@ballicom.co.uk
