This product is out of stock

If you would like to be emailed when this product becomes available, please click here

APC Smart-UPS X 3000 Rack/Tower LCD UPS - 2700 Watt - 3000 VA - with APC UPS Network Management Card AP9631

    • Intuitive LCD interface
      It provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
    • High frequency design
      It reduces or eliminates bulky transformers resulting in lighter units for ease of handling.
    • Auto recognition of external batteries
      UPS recognizes when external battery packs are attached and automatically adjusts runtime.
    • Predictive replace battery date
      It dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
    • Green mode
      Patent-pending operating mode bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
    • Energy meter
      It provides actual kilowatt hours of usage for energy conscious users.
    • Audible alarms
      Audible alarms provide notification of changing flywheel conditions
    • Pure sine wave output on battery
      It simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
    • Multiple switched outlet groups
      Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
    • Wide input voltage range
      Wide input voltage range is designed for harsh electrical environments to save battery life.
    • Battery failure notification
      It provides early-warning fault analysis on batteries enabling timely preventive maintenance
    • High online efficiency
      It reduces utility costs, generates less heat.
    • LED indicators
      LED indicators provide easy-to-read status of your utility power conditions, UPS and battery.
    • Overload protection
      It safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.
    • Cold-start capable
      It provides temporary battery power when the utility power is out.
    • Hot-swappable batteries
      It ensures clean, uninterrupted power to protected equipment while batteries are being replaced
    • Automatic self-test
      Periodic battery self-test ensures early detection of a battery that needs to be replaced.
    • Automatic restart of loads after UPS shutdown
      It automatically starts up the connected equipment upon the return of utility power.
    • Adjustable voltage-transfer points
      It maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
    • Adjustable voltage sensitivity
      It provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
    • User-replaceable batteries
      It increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
    • Serial connectivity
      It provides management of the UPS via a serial port.
    • Temperature-compensated battery charging
      It prolongs battery life by regulating the charge voltage according to battery temperature.
    • Boost and trim Automatic Voltage Regulation (AVR)
      It gives higher application availability by correcting low and high voltage conditions without using the battery.
    • Scalable runtime
      It allows additional run time to be quickly added as needed.
    • Intelligent battery management
      It maximizes battery performance, life, and reliability through intelligent, precision charging.
    • Safety-agency approved
      It ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
    • Rack/tower convertible
      It protects the initial investment in the UPS when migrating from tower to rack-mount environment.
    • Power conditioning
      It protects connected loads from surges, spikes, lightning, and other power disturbances.
    • Network manageable
      It provides remote management of the UPS over the network.
    • Frequency and voltage regulation
      It gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
    • Predictive failure notification
      It provides early-warning fault analysis ensuring proactive component replacement.
    • Intelligent battery management
    • Power conditioning
    • Temperature-compensated battery charging
    • Automatic restart of loads after UPS shutdown
    • Automatic self-test
    • Network manageable
    • Audible alarms
    • LED status indicators
  • Model: SMX3000HVNC

    MPN: SMX3000HVNC

Recommended Desktop Accessories

Recommended Server Accessories

Recommended Cabling Accessories

Recommended Power Cables

Recommended KVM Switches

Recommended KVM Console

Recommended Linux Software

Recommended Power Enclosures

Customers also bought

RRP: £1,718.21 inc VAT
Save 7%
£1,593.91 inc VAT £1,328.26 ex VAT
  • MPN SMX3000HVNC
  • Quickcode 946967
  • Qty Available 0
  • Total Stock 51
This product is currently not available, please check again later
  • Buy 2 for £1,325.86 + VAT each
  • Buy 3 for £1,323.46 + VAT each
  • Buy 4 for £1,321.06 + VAT each
  • Buy 5 for £1,318.66 + VAT each
  • Buy 6+ for £1,316.26 + VAT each
Shipping
  • Next Working Day: £7.97
  • 3 Working Days: £4.98
  • 7 Working Days: Free * Exceptions Apply
  • Collection: Free
  • All Delivery Prices inc VAT
Buying for Business?

Call Now: 02477 710171
Or Email to: trade@ballicom.co.uk

Recently Viewed Products

What do our Customers think about us!