Startech M.2 to SATA Adapter
Dual Slot | for 2.5in Drive Bay | RAID | M.2 SSD | M.2 Adapter | M.2 SSD Adapter (S322M225R) | Storage controller (RAID) | M.2 | M.2 Card | RAID 0, 1, JBOD, BIG | SATA 6Gb/s | red
Images for illustration purposes only, actual product may differ
More like this
In this category:
Main Specification
| Product Description | Startech M.2 to SATA Adapter - Dual Slot - for 2.5in Drive Bay - RAID - M.2 SSD - M.2 Adapter - M.2 SSD Adapter (S322M225R) - storage controller (RAID) - M.2 Card - SATA 6Gb/s |
|---|---|
| Device Type | Storage controller (RAID) - internal |
| Bus Type | SATA 6Gb/s |
| Colour | Red |
| Compatible Bay | 1 2.5" |
| Hard Drive Form Factor Compatibility | M.2 |
| Interface | M.2 Card |
| Data Transfer Rate | 6 GBps |
| Supported Devices | Disk array (RAID), solid state drive |
| Max Storage Devices Qty | 2 |
| RAID Level | RAID 0, RAID 1, JBOD, BIG |
| Dimensions (WxDxH) | 7 cm x 10 cm x 0.7 cm |
| Weight | 41 g |
| Manufacturer Warranty | 2-year warranty |
General
| Device Type | Storage controller (RAID) - internal |
|---|---|
| Hard Drive Form Factor Compatibility | M.2 |
| Host Bus | SATA 6Gb/s |
| Colour | Red |
Storage Controller
| Interface | M.2 Card |
|---|---|
| Data Transfer Rate | 6 GBps |
| Supported Devices | Disk array (RAID), solid state drive |
| Max Storage Devices Qty | 2 |
| RAID Level | RAID 0, RAID 1, JBOD, BIG |
| Processor | ASMedia ASM1092R |
Expansion / Connectivity
| Interfaces | 2 x M.2 Card - M.2 Card |
|---|---|
| Connections | 1 x SATA 6Gb/s - 22 pin Serial ATA |
| Compatible Bay | 1 x internal 2.5" |
Miscellaneous
| Included Accessories | 4 x screws, 2 sets of drive-mounting hardware |
|---|---|
| Features | S.M.A.R.T. support, TRIM support |
| Compliant Standards | FCC, RoHS, WEEE |
Manufacturer Warranty
| Service & Support | Limited warranty - 2 years |
|---|
Dimensions & Weight
| Width | 7 cm |
|---|---|
| Depth | 10 cm |
| Height | 0.7 cm |
| Weight | 41 g |
Environmental Parameters
| Min Operating Temperature | 5 °C |
|---|---|
| Max Operating Temperature | 50 °C |
| Humidity Range Operating | 15 - 90% |
Product features
High performance
Create a high-performance storage solution by installing up to two M.2 SATA SSDs into a 2.5" SATA adapter with RAID support for JBOD, SPAN, RAID 0, and RAID 1.Hassle-free setup
Open-frame steel mounting bracket with 2.5" SATA form factor fits in any 2.5" SATA bay that supports 7mm tall 2.5" drives. Easy to install with all necessary hardware included.Wide compatibility
Supports B & B+M key SATA M.2 SSDs in 2230/2242/2260/2280 form factors. Supports SATA I, II, and III (up to 6 Gbps) TRIM, and SMART. M & B+M key NVMe or AHCI PCI-e M.2 SSDs not supported (only SATA supported).TRIM support
TRIM support enhances the stability and performance of your M.2 SSDs plus it provides SMART support. TRIM supported in JBOD and RAID 1, SMART only supported in JBOD.Key selling points
- High performance
- Hassle-free setup
- Wide compatibility
- TRIM support
References
MPN: S322M225R
Hard Drive Mounting Products Recommended
Power Cables Products Recommended
Storage Cables Products Recommended
What our Customers think about us!
Page generated at:
09/06/2026 00:52:16