Tripp Lite DisplayPort to HDMI Over Cat5/6 Video Extender Transmittor & Receiver video/audio extender - TAA Compliant

Converts a DisplayPort Signal to HDMI and Extends It Up to 150 ft. via a Single Cat5e/6 Cable

Tripp Lite’s B150-1A1-HDMI DisplayPort to HDMI over Cat5e/6 Active Extender Kit includes a transmitter and a receiver that convert a DisplayPort audio/video signal to HDMI, and then extend it to a high-definition television, monitor or projector up to 150 ft. away. You can save money by using your existing HDMI display without an expensive upgrade to a new DisplayPort monitor. The B150-1A1-HDMI is ideal for digital signage applications in schools, churches, trade shows, convention centers, retail environments and other locations where the video source is located farther from the display than conventional HDMI cables allow.

Typical Applications

  • Streaming audio/video signals from a computer to HDTVs or monitors in another room
  • Video-conferencing in conference rooms, offices and classrooms
  • Displaying industrial and marketing videos at trade shows
Converts a DisplayPort Signal to HDMI and Extends It Up to 150 ft. via a Single Cat5e/6 Cable
Supports 1080i Video Resolutions Up to 150 ft. (at 60 Hz) and Rich Stereo Sound
The HDCP 1.3-compliant B150-1A1-HDMI can extend a 1080i signal up to 150 feet (45.7 meters) or a 1080p signal up to 125 feet (38.1 meters) with a single Cat5e/6 cable. In addition to crystal-clear video, including 24-bit True Color (8 bits per channel), the B150-1A1-HDMI delivers full, rich stereo. The DisplayPort source device must be enabled to support audio in order for the B150-1A1-HDMI to extend audio signals.

Uses Inexpensive Cat5e/6 Cabling
One low-cost, user-supplied Cat5e/6 cable connects the transmitter and the receiver. For best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series.
Easy to Set Up and Use The plug-and-play B150-1A1-HDMI requires no external power, software or drivers, no matter which major operating system you use. Just connect the transmitter’s built-in DisplayPort cable to the source device and a Cat5e/6 cable between the transmitter’s RJ45 output jack and the receiver. Connect the receiver’s built-in HDMI cable to the display. Both units are powered via the included USB Micro-B cables, which connect to USB ports on the source and display devices or USB wall chargers. LEDs light up to indicate when the units are receiving power and sharing a signal. Use the receiver’s equalization control to adjust the video image.

HDMI Connector Latches Tightly The receiver’s built-in HDMI cable features a latching connector that helps prevent the unit from becoming dislodged or accidentally disconnected from the display device
One-Year Warranty and Environmentally Responsible Design
The B150-1A1-HDMI comes with a one-year warranty. It’s manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite’s commitment to environmental responsibility.

TAA-Compliant for GSA Schedule Purchases
The B150-1A1-HDMI is compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Why Choose Tripp Lite?

Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, connect, house and protect your equipment. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosures, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 90 years of quality products and service, Tripp Lite is a brand you can trust.

Tripp Lite B150-1A1-HDMI Product Summary
  • Converts a DisplayPort signal to HDMI and extends it up to 150 ft. away from the source
  • Extends a high-definition 1080i (60 Hz) signal up to 150 ft. and a 1080p (60 Hz) signal up to 125 ft.
  • Supports stereo audio
  • Built-in HDMI cable with latching connector helps prevent accidental disconnection
  • Plug and play; no software or drivers required
  • Works with all major operating systems
  • TAA-compliant for GSA Schedule purchases
  • One-year warranty
What’s in the Box
  • Local Transmitter Unit
  • Remote Receiver Unit
  • (2) USB Micro-B Cables, 3 ft.
  • Screwdriver
  • Owner’s Manual
  • Model: B150-1A1-HDMI

    MPN: B150-1A1-HDMI

£ 87.53 inc VAT £72.94 ex VAT
  • MPN B150-1A1-HDMI
  • Quickcode 1354261
  • Qty Available 7
  • Total Stock 7
  • Buy 2 for £72.57 + VAT each
  • Buy 3 for £72.20 + VAT each
  • Buy 4 for £71.83 + VAT each
  • Buy 5 for £71.46 + VAT each
  • Buy 6+ for £71.09 + VAT each
  • Next Working Day: £7.97
  • 3 Working Days: £4.98
  • 7 Working Days: Free *(over £100) Exceptions Apply
  • All Delivery Prices inc VAT
  • 7 Day Free, Next day and 3 Day delivery are only available to UK mainland addresses, this excludes: Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.
Buying for Business?

Call Now: 02477 710171
Or Email to:

Recently Viewed Products

What do our Customers think about us!