HPE Mainstream Endurance Enterprise Mainstream H2
SSD | 800 GB | hot-swap | 2.5" SFF | SAS 12Gb/s | remarketed | factory integrated | with HP SmartDrive carrier
Main Specification
| Product Description | HPE Mainstream Endurance Enterprise Mainstream H2 - SSD - 800 GB - SAS 12Gb/s - factory integrated |
|---|---|
| Type | Solid state drive - hot-swap |
| Capacity | 800 GB |
| Form Factor | 2.5" SFF |
| Interface | SAS 12Gb/s |
| Data Transfer Rate | 1.2 GBps |
| Features | TRIM support |
| Dimensions (WxDxH) | 15 mm |
| Pricing Type | Factory integrated - remarketed |
| Bundled with | HP SmartDrive carrier |
General
| Device Type | Solid state drive - hot-swap |
|---|---|
| Capacity | 800 GB |
| Form Factor | 2.5" SFF |
| Interface | SAS 12Gb/s |
| Bytes per Sector | 512 |
| Features | TRIM support |
| Height | 15 mm |
| Bundled with | HP SmartDrive carrier |
Performance
| Drive Transfer Rate | 1.2 GBps (external) |
|---|---|
| Internal Data Rate | 1000 MBps (read) / 565 MBps (write) |
| 4KB Random Read | 66000 IOPS |
| 4KB Random Write | 64000 IOPS |
Reliability
| MTBF | 2,000,000 hours |
|---|
Expansion & Connectivity
| Interfaces | 1 x SAS 12 Gb/s |
|---|---|
| Compatible Bay | 2.5" SFF |
Power
| Power Consumption | 9 watt |
|---|
Miscellaneous
| Pricing Type | Factory integrated - remarketed |
|---|
Environmental Parameters
| Min Operating Temperature | 0 °C |
|---|---|
| Max Operating Temperature | 60 °C |
Product features
Higher performance and better latency
HPE SSDs enable rapid reads and writes of transactional data. On an HDD, random reads require constant repositioning of the read/write head to seek the exact location of data on the platter before the data transfer can begin. However, SSDs have no moving parts or rotating platters that can cause latency problems, and that results in faster access to data. Therefore, with faster seek times, the drives achieve high IOPS, producing quicker data access and better latency. The drives also pack the operating performance of several rotating HDDs into the same space as a single HDD, so you can get more performance out of your existing data center.Lower power consumption
Steadily increasing storage requirements pose power and performance challenges to data centers. Solid state devices have a significantly better performance-to-power rating than traditional rotating HDDs. The lack of a motor greatly reduces an SSD's power consumption, so the drives draw less energy - less than two watts idle and less than nine watts maximum - for SSDs.Environmental ruggedness
The inherent environmental ruggedness of SSDs makes them well suited for extreme environments where traditional drives cannot operate. The drives can tolerate significantly higher operating shock and vibration levels compared to traditional rotating HDDs. In fact, they virtually eliminate rotational vibration problems.High reliability
Reliability is important for any storage medium, and it is essential when considering a storage device that can be used in servers. HPE Enterprise SSDs pass a rigorous HPE ProLiant qualification of 2.4 million test hours.Investment protection
HPE Enterprise SSDs are a drop-in replacement for existing HDDs. They fit into existing HDD hot-plug bays and require no modification to operating system or infrastructure tools. The drives are recognized as standard SAS or SATA devices with no special changes in firmware or hardware. Although you cannot mix SSDs and HDDs in the same logical array, you can mix them within the system to provide a more effective use of both technologies.Key selling points
- Higher performance and better latency
- Lower power consumption
- Environmental ruggedness
- High reliability
- Investment protection
References
MPN: 779172R-B21#0D1
What our Customers think about us!
Page generated at:
04/06/2026 21:24:00