ARCTIC P14 PWM
Case fan | 140 mm | white, transparent
Main Specification
| Product Description | ARCTIC P14 PWM - case fan |
|---|---|
| Product Type | Case fan |
| Colour | White, transparent |
| Fan Diameter | 140 mm |
| Fan Height | 27 mm |
| Fan Bearing | Fluid dynamic bearing |
| Rotation Speed | 200-1700 rpm |
| Air Flow | 72.8 cfm |
| Noise Level | 0.3 Sone |
| Power Connector | 4-pin fan connector |
| Features | Pulse-width modulation (PWM) support |
| Dimensions (WxDxH) | 14 cm x 14 cm x 2.7 cm |
| Weight | 194 g |
| Manufacturer Warranty | 10 years warranty |
General
| Product Type | Case fan |
|---|---|
| Width | 14 cm |
| Depth | 14 cm |
| Height | 2.7 cm |
| Weight | 194 g |
| Shipping Dimensions (WxDxH) / Weight | 14.3 cm x 14.3 cm x 2.9 cm / 233 g |
| Colour | White, transparent |
Heatsink & Fan
| Fan Diameter | 140 mm |
|---|---|
| Fan Height | 27 mm |
| Fan Bearing | Fluid dynamic bearing |
| Rotation Speed | 200-1700 rpm |
| Air Flow | 72.8 cfm |
| Noise Level | 0.3 Sone |
| Power Connector | 4-pin fan connector |
| Start Voltage | 3.9 V |
| Rated Current | 0.12 A |
| Cable Length | 40 cm |
| Features | Pulse-width modulation (PWM) support |
Manufacturer Warranty
| Service & Support | Limited warranty: - 10 years |
|---|
Product features
More efficient technology
The motor is powered by a neodym-iron-boron-magnet ring, which allows the P14 PWM to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without compromising the performance.Maximum quietness, minimum vibration
Even at low speeds the operating sound of the ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the motor.0 dB mode
The P14 PWM is able to switch into silent passive mode when PWM signal is below 5 % due to its innovative motor. This allows working at your PC in complete silence without any unwanted noise.High quality bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.Key selling points
- More efficient technology
- Maximum quietness, minimum vibration
- 0 dB mode
- High quality bearing
References
MPN: ACFAN00223A
What our Customers think about us!
Page generated at:
04/06/2026 20:28:50