PLANET WGS-4215-8P2S

Switch | Managed | 8 x 10/100/1000 (PoE+) + 2 x SFP | DIN rail mountable, wall-mountable | PoE+ (200 W) | DC power

MPN WGS-4215-8P2S
Manufacturer Assmann
QuickCode 1299120
Qty immediately available 30
Total stock 59
£219.29 inc VAT
£182.74 ex VAT
Quantity in Cart:
Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description PLANET WGS-4215-8P2S - switch - 8 ports - Managed
Device Type Switch - 8 ports - Managed
Subtype Gigabit Ethernet
Ports 8 x 10/100/1000 (PoE+) + 2 x SFP
Power Over Ethernet (PoE) PoE+
PoE Budget 200 W
Performance Switching fabric bandwidth: 20 Gbps Throughput (64-byte packet size): 14.8 Mpps
MAC Address Table Size 8K entries
Jumbo Frame Support 10KB
Routing Protocol IGMPv2, IGMP, IGMPv3, MLDv2, MLD
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH
Features Flow control, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, WRR queuing, store and forward, IPv6 support, half duplex mode, full duplex mode, firmware upgradable, STP support, RSTP support, MSTP support, DHCP snooping, TFTP support, ACL support, QoS, MLD snooping, IPv4 support, LLDP support, SNMP support, DSCP support, Back Pressure Support, ICMP
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at
Power DC 48 - 56 V
Dimensions (WxDxH) 17.8 cm x 2.5 cm x 13.4 cm
Weight 640 g

General

Device Type Switch - 8 ports - Managed
Enclosure Type DIN rail mountable, wall-mountable
Subtype Gigabit Ethernet
Ports 8 x 10/100/1000 (PoE+) + 2 x SFP
Power Over Ethernet (PoE) PoE+
PoE Budget 200 W
Performance Switching fabric bandwidth: 20 Gbps Throughput (64-byte packet size): 14.8 Mpps
MAC Address Table Size 8K entries
Jumbo Frame Support 10KB
Routing Protocol IGMPv2, IGMP, IGMPv3, MLDv2, MLD
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH
Encryption Algorithm SSL
Authentication Method Secure Shell (SSH), RADIUS, TACACS+
Features Flow control, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, WRR queuing, store and forward, IPv6 support, half duplex mode, full duplex mode, firmware upgradable, STP support, RSTP support, MSTP support, DHCP snooping, TFTP support, ACL support, QoS, MLD snooping, IPv4 support, LLDP support, SNMP support, DSCP support, Back Pressure Support, ICMP
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at
Status Indicators Power, PoE, link/activity

Expansion / Connectivity

Interfaces 8 x 1000Base-T RJ-45 PoE+ - 36 W 2 x 1000Base-X SFP

Power

Voltage Required DC 48 - 56 V
Power Consumption Operational 210 watt

Miscellaneous

Compliant Standards FCC Part 15 A

Dimensions & Weight

Width 17.8 cm
Depth 2.5 cm
Height 13.4 cm
Weight 640 g

Environmental Parameters

Min Operating Temperature -40 °C
Max Operating Temperature 75 °C
Humidity Range Operating 5 - 95% (non-condensing)
Min Storage Temperature -40 °C
Max Storage Temperature 85 °C
Humidity Range Storage 5 - 95% (non-condensing)
Product features

Intelligent powered device alive check

The WGS-4215-8P2S can be configured to monitor connected PD (powered device) status in real time via ping action. Once the PD stops working and responding, the WGS-4215-8P2S will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD's power source and reducing administrator management burden.

Scheduled power recycling

The WGS-4215-8P2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.

PoE schedule for energy saving

Under the trend of energy saving worldwide and contributing to environmental protection, the WGS-4215-8P2S can effectively control the power supply besides its capability of giving high Watts power. The "PoE schedule" function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs, that should not be in use during non-business hours.

Innovative wall-mount installation

The WGS-4215-8P2S is specially designed to be installed in a narrow environment, such as wall enclosure or electric weak box. The compact, flat and wall-mounted design fits easily in any space-limited location. It adopts the user-friendly "front access" design, making the installing, cable wiring, LED monitoring and maintenance of the WGS-4215-8P2S placed in an enclosure very convenient for technicians. The WGS-4215-8P2S can be installed by fixed wall mounting, magnetic wall mounting or DIN rail, thereby making its usability more flexible.

Environmentally hardened design

With IP30, flat but rugged metal housing protection, the WGS-4215-8P2S provides a high level of immunity against electromagnetic interference and heavy electrical surges, which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 degrees C, the WGS-4215-8P2S can be placed in almost any difficult environment.

IPv6/IPv4 dual stack management

Supporting both IPv6 and IPv4 protocols, the WGS-4215-8P2S helps the SMBs to step in the IPv6 era with the low investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.

Robust Layer 2 features

The WGS-4215-8P2S can be programmed for advanced switch management functions, such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping. Via the link aggregation, the WGS-4215-8P2S allows the operation of a high-speed trunk to combine with multiple ports, such as a 16 Gbps fat pipe, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.

Efficient traffic control

The WGS-4215-8P2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality combines broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It delivers the optimal performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.

Friendly and secure management

For efficient management, the WGS-4215-8P2S is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the WGS-4215-8P2S offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the WGS-4215-8P2S offers secure remote management by supporting SSH, SSL and SNMP v3 connections, which encrypt the packet content at each session.

Advanced network security

PLANET WGS-4215-8P2S offers a comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, the WGS-4215-8P2S also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discarded ARP packets with invalid address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.

Flexibility and long-distance extension solution

The two mini-GBIC slots built in the WGS-4215-8P2S support SFP auto-detection and dual speed as it features 100Base-FX and 1000Base-SX/LX SFP (small form-factor pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended. They are well suited for applications within the enterprise data centers and distributions.

Intelligent SFP diagnosis mechanism

The WGS-4215-8P2S supports SFP-DDM (digital diagnostic monitor) function, that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.
Key selling points
  • Intelligent powered device alive check
  • Scheduled power recycling
  • PoE schedule for energy saving
  • Environmentally hardened design
  • IPv6/IPv4 dual stack management
  • Robust Layer 2 features
  • Efficient traffic control
  • Friendly and secure management
  • Advanced network security
  • Flexibility and long-distance extension solution
  • Intelligent SFP diagnosis mechanism
References

MPN: WGS-4215-8P2S

What our Customers think about us!

What our Customers think about us!

Page generated at: 24/06/2026 09:08:32