Allied Telesis AT DMC100/ST
Fibre media converter | 100Mb LAN | 100Base-FX, 100Base-TX | RJ-45 / ST multi-mode | up to 2 km | 1310 nm
More like this
In this category:
Main Specification
| Product Description | Allied Telesis AT DMC100/ST - fibre media converter - 100Mb LAN |
|---|---|
| Device Type | Fibre media converter - RJ-45 / ST multi-mode |
| Form Factor | Desktop |
| Localisation | United Kingdom |
| Cabling Type | 100Base-FX, 100Base-TX |
| Data Transfer Rate | 100 Mbps |
| Optical Wave Length | 1310 nm |
| Data Link Protocol | 100Mb LAN |
| Max Transfer Distance | 2 km |
| Dimensions (WxDxH) | 3.18 cm x 9.14 cm x 2.16 cm |
| Weight | 113 g |
General
| Device Type | Fibre media converter |
|---|---|
| Form Factor | Desktop |
| Localisation | United Kingdom |
Networking
| Connectivity Technology | Wired |
|---|---|
| Cabling Type | 100Base-FX, 100Base-TX |
| Data Link Protocol | 100Mb LAN |
| Data Transfer Rate | 100 Mbps |
| Optical Wave Length | 1310 nm |
| Max Transfer Distance | 2 km |
| Status Indicators | System, link/activity |
| Features | Auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), Smart Missing Link (SML), USB powered, Automatic Link Restoration |
| Compliant Standards | IEEE 802.1Q |
Expansion / Connectivity
| Interfaces | 1 x Ethernet 100Base-FX - ST multi-mode female x 2 1 x Ethernet 100Base-TX - RJ-45 female |
|---|
Miscellaneous
| Compliant Standards | FCC Class A certified, VCCI, C-Tick, CISPR 22 Class A, EN 61000-3-2, EN 61000-3-3, EN55024, RoHS, UL 60950-1, EN 60950-1, EN 55022 Class A |
|---|
Power
| Power Device | External power adapter |
|---|
Dimensions & Weight
| Width | 3.18 cm |
|---|---|
| Depth | 9.14 cm |
| Height | 2.16 cm |
| Weight | 113 g |
Environmental Parameters
| Min Operating Temperature | 0 °C |
|---|---|
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 5 - 95% (non-condensing) |
Product features
Fiber connections
The Allied Telesis range of Fast Ethernet media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting both SC and ST fiber connectors, these converters can be used to extend networks with the multi-mode fiber.VLAN support
Many backbone switch products support IEEE 802.1Q specification for Virtual LANs (VLANs) that send data packets on the network. The DMC100 switches are fully compatible with these packets, enabling them to be used in modern networks.Smart Missing Link (SML)
The Allied Telesis range of Fast Ethernet media converters allow users to extend the size of UTP networks with the use of fiber cabling. Supporting both SC and ST fiber connectors, these converters can be used to extend networks with the multi-mode fiber.Simple installation
All Allied Telesis media converters feature auto MDI / MDI-X, allowing the converter to be connected to either a PC, hub, or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of the fiber connection, by forcing the converters to communicate over the fiber cable. This Link Test feature allows installers to check for cable faults without the need for expensive fiber-optic test equipment.Link Restoration feature
Link Restoration allows the devices, in cases of power failure, link loss, or other interrupted service to automatically restore the link without the need to restart / reset them.Key selling points
- Auto-negotiation
- Transparent to IEEE 802.1Q packets
- Auto MDI / MDI-X
- Smart Missing Link
- Link Test feature
- RoHS compliant
- Wall-mountable
References
MPN: AT-DMC100/ST-30
What our Customers think about us!
Page generated at:
04/06/2026 10:00:00