Allied Telesis AT PC2000/LC
Fibre media converter | 1GbE | 10Base-T, 1000Base-LX, 1000Base-SX, 100Base-TX, 1000Base-T | SFP (mini-GBIC) / RJ-45 | 850 nm
Main Specification
| Product Description | Allied Telesis AT PC2000/LC - fibre media converter - 10Mb LAN, 100Mb LAN, 1GbE |
|---|---|
| Device Type | Fibre media converter - SFP (mini-GBIC) / RJ-45 |
| Form Factor | Wall mountable |
| Cabling Type | 10Base-T, 1000Base-LX, 1000Base-SX, 100Base-TX, 1000Base-T |
| Data Transfer Rate | 1 Gbps |
| Optical Wave Length | 850 nm |
| Data Link Protocol | 10Mb LAN, 100Mb LAN, 1GbE |
| Power Over Ethernet (PoE) | PoE+ |
| Power | AC 120/230 V |
| Dimensions (WxDxH) | 15.5 cm x 14.9 cm x 4 cm |
| Weight | 748 g |
General
| Device Type | Fibre media converter |
|---|---|
| Form Factor | Wall mountable |
Networking
| Connectivity Technology | Wired |
|---|---|
| Cabling Type | 10Base-T, 1000Base-LX, 1000Base-SX, 100Base-TX, 1000Base-T |
| Data Link Protocol | 10Mb LAN, 100Mb LAN, 1GbE |
| Data Transfer Rate | 1 Gbps |
| Optical Wave Length | 850 nm |
| MAC Address Table Size | 4K entries |
| Status Indicators | Power, active, fault |
| Features | VLAN support, auto-uplink (auto MDI/MDI-X), Smart Missing Link (SML), store and forward, Jumbo Frames support |
| Compliant Standards | IEEE 802.1Q, IEEE 802.3at |
Expansion / Connectivity
| Interfaces | 1 x Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 female 1 x Ethernet 1000Base-LX/1000Base-SX - LC female x 2 |
|---|
Miscellaneous
| Compliant Standards | FCC Class B certified, C-Tick, EN55022 Class A |
|---|
Power
| Power Over Ethernet (PoE) | PoE+ |
|---|---|
| Power Device | Internal power supply |
| Installed Qty | 1 |
| Max Supported Qty | 1 |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Power Consumption Operational | 35 watt |
Dimensions & Weight
| Width | 15.5 cm |
|---|---|
| Depth | 14.9 cm |
| Height | 4 cm |
| Weight | 748 g |
Environmental Parameters
| Min Operating Temperature | 0 °C |
|---|---|
| Max Operating Temperature | 50 °C |
| Humidity Range Operating | 5 - 95% (non-condensing) |
Product features
Remote power cycle
The PC2000 series offers feature where when the fiber port is dropped the TX PoE+ port will cycle power. It allows a remote administrator to login in a switch and disable the switch port in which the PC2000 series is attached and will have the remote PoE+ device to lose power. This can be useful when an administrator needs to reset a remote device without actually physical going to the location.VLAN support
Many backbone switch products support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that sends extra-long data packets on the network. PC2000 series switches are fully compatible with these long packets, enabling them to be used in modern networks. Switches not supporting this feature will discard these extra-long packets, making them unsuitable for modern networks.Small and flexible
The small size and internal power supply of the PC2000 series allows them to be used almost anywhere.Smart MissingLink (SML)
The Smart MissingLink (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime.Key selling points
- Convert speed as well as media type
- Auto MDI/MDI-X
- Smart Missing Link
- Support for multi-mode fiber
- 4K MAC address tables
- Store-and-forward switching mode
- Standalone or wall mountable
- Internal AC power supply
References
MPN: AT-PC2000/LC-60
What our Customers think about us!
Page generated at:
04/06/2026 05:10:20