Allied Telesis AT x930-52GPX

Switch | L3 | Managed | 48 x 10/100/1000 (PoE+) + 4 x 1 Gigabit / 10 Gigabit SFP+ | desktop, rack-mountable | PoE+

MPN AT-x930-52GPX
Manufacturer Allied
QuickCode 1131419
Qty immediately available 0
Total stock 0
RRP: £8,185.99 inc VAT
£5,007.32 inc VAT
£4,172.77 ex VAT
Save
38%

This item is out of stock

Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description Allied Telesis AT x930-52GPX - switch - 48 ports - Managed - rack-mountable
Device Type Switch - 48 ports - L3 - Managed - stackable
Enclosure Type Rack-mountable
Subtype Gigabit Ethernet
Ports 48 x 10/100/1000 (PoE+) + 4 x 1 Gigabit / 10 Gigabit SFP+
Power Over Ethernet (PoE) PoE+
Performance Stacking bandwidth: 40 Gbps Switching fabric bandwidth: 336 Gbps Forwarding performance: 250 Mpps Latency (10 Mbps): 47.4 µs Latency (100 Mbps): 7.9 µs Latency (1000Base-T): 3.7 µs Latency (10 Gbps): 2.6 µs
Capacity Priority queues per port: 8 VLANs supported: 4096 Virtual Routing and Forwarding (VRF) entries: up to 64
MAC Address Table Size 64K entries
Jumbo Frame Support 13KB
Routing Protocol BGP-4, RIP-1, RIP-2, BGP, IGMPv2, IGMP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPF for IPv6, OSPFv3, static IPv4 routing, static IPv6 routing, ECMP, policy-based routing (PBR), RIPng, MLDv2, MLD, VRRPv3
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI
Features Full duplex capability, auto-negotiation, ARP support, VLAN support, Syslog support, DoS attack prevention, port mirroring, DiffServ support, MAC address filtering, IPv6 support, wall mountable, DDMI, sFlow, RSTP support, MSTP support, DHCP snooping, TFTP support, ACL support, QoS, Jumbo Frames support, VRF-Lite, DAI, PVST+, ECMP, STP Root Guard, UDLD, IPv4 support, DHCP relay, NTP server, DNS relay, DHCP client, NAC, loop prevention, 4MB packet buffer, OpenFlow support, EPSRing, VCStack, DDM technology, BPDU, black hole routing, CPP, SLP, LD-VCStack, SCP, AMF, BIST, Cable fault locator (TDR)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX
Power AC 120/230 V (50/60 Hz)
Power Redundancy Yes
Dimensions (WxDxH) 44 cm x 42 cm x 4.4 cm
Weight 5.1 kg

General

Device Type Switch - 48 ports - L3 - Managed - stackable
Enclosure Type Desktop, rack-mountable
Subtype Gigabit Ethernet
Ports 48 x 10/100/1000 (PoE+) + 4 x 1 Gigabit / 10 Gigabit SFP+
Power Over Ethernet (PoE) PoE+
Performance Stacking bandwidth: 40 Gbps Switching fabric bandwidth: 336 Gbps Forwarding performance: 250 Mpps Latency (10 Mbps): 47.4 µs Latency (100 Mbps): 7.9 µs Latency (1000Base-T): 3.7 µs Latency (10 Gbps): 2.6 µs
Capacity Priority queues per port: 8 VLANs supported: 4096 Virtual Routing and Forwarding (VRF) entries: up to 64
MAC Address Table Size 64K entries
Jumbo Frame Support 13KB
Routing Protocol BGP-4, RIP-1, RIP-2, BGP, IGMPv2, IGMP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPF for IPv6, OSPFv3, static IPv4 routing, static IPv6 routing, ECMP, policy-based routing (PBR), RIPng, MLDv2, MLD, VRRPv3
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI
Encryption Algorithm DES, Triple DES, MD5, SHA-1, TLS 1.0, SSL 3.0, SSL 2.0, PEAP, TTLS
Authentication Method Secure Shell (SSH), RADIUS, X.509 certificates, TACACS+, Secure Shell v.2 (SSH2), Extensible Authentication Protocol (EAP)
Features Full duplex capability, auto-negotiation, ARP support, VLAN support, Syslog support, DoS attack prevention, port mirroring, DiffServ support, MAC address filtering, IPv6 support, wall mountable, DDMI, sFlow, RSTP support, MSTP support, DHCP snooping, TFTP support, ACL support, QoS, Jumbo Frames support, VRF-Lite, DAI, PVST+, ECMP, STP Root Guard, UDLD, IPv4 support, DHCP relay, NTP server, DNS relay, DHCP client, NAC, loop prevention, 4MB packet buffer, OpenFlow support, EPSRing, VCStack, DDM technology, BPDU, black hole routing, CPP, SLP, LD-VCStack, SCP, AMF, BIST, Cable fault locator (TDR)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX
RAM 2 GB DDR SDRAM
Flash Memory 256 MB
Built-in Devices Led panel
Status Indicators Port duplex mode, PoE, link/activity

Expansion / Connectivity

Interfaces 24 x 1000Base-T RJ-45 PoE+ 4 x Gigabit / 10Gbit LAN SFP+ 1 x console RJ-45 1 x management (Gigabit LAN) RJ-45 1 x USB Type A
Expansion Slots 1 (total) / 1 (free) x Expansion Slot

Power

Power Device Internal power supply - hot-plug
Installed Qty 2
Max Supported Qty 2
Power Redundancy Yes
Power Redundancy Scheme 1+1
Voltage Required AC 120/230 V (50/60 Hz)
Power Consumption Operational 97 watt

Miscellaneous

Rack Mounting Kit Included
Compliant Standards FCC Class A certified, UL, cUL, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, UL 60950-1, EN 60950-1, EN 60825-1, CAN/CSA C22.2 No. 60950-1-03, VCCI Class A, China RoHS

Dimensions & Weight

Width 44 cm
Depth 42 cm
Height 4.4 cm
Weight 5.1 kg

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 45 °C
Humidity Range Operating 5 - 90% (non-condensing)
Min Storage Temperature -25 °C
Max Storage Temperature 70 °C
Humidity Range Storage 5 - 95% (non-condensing)
Product features

Unified network management

The x930 series has the capability to manage large-scale wired and wireless networks on a single platform to reduce complexity and increase administrative consistency. The Allied Telesis Management Framework (AMF) is the key to unifying network management. It saves time and reduces cost by automating many every day network management tasks.

Network resiliency

The convergence of network services in the enterprise has led to increasing demand for highly available networks with minimal downtime. VCStack, in conjunction with link aggregation, provides a network with no single point of failure and an easy, resilient solution for high availability applications. The x930 series can form a VCStack for enhanced resiliency and simplified device management. Stacks can be created over long distance fiber links with VCStack LD (Long Distance), making the x930 series the perfect choice for distributed environments. The addition of Ethernet Protection Switched Ring (EPSRing) resilient ring protocol ensures distributed network segments have high-speed, resilient access to online resources and applications.

Reliable

The x930 series was designed with reliability in mind, and guarantees continual delivery of essential services. With dual hot-swappable load-sharing power supplies and near-hitless online stack reconfiguration, maintenance may be performed without affecting network uptime.

Secure

Advanced security features protect the network from the edge to the core. The x930 series offers powerful control over network traffic types, protection against network attacks, secure management options, loop guard to detect cabling mistakes, and tri-authentication for comprehensive end-point access control.
Key selling points
  • Unified network management
  • Network resiliency
  • Reliable
  • Secure
References

MPN: AT-x930-52GPX

What our Customers think about us!

What our Customers think about us!

Page generated at: 04/06/2026 06:46:40