Allied Telesis AT X950-52XTQM

Switch | L3+ | Managed | 48 x 1/2.5/5/10GBase-T + 4 x 40/100 Gigabit QSFP+ / QSFP28 | rack-mountable

product image

More like this

In this category: 
10/25/40/50/100 Gigabit Switches Managed Switches Rack-Mountable Hubs & Switches
MPN AT-X950-52XTQM
Manufacturer Allied Telesis
QuickCode 1659767
Qty immediately available 0
Total stock 0
£16,033.85 inc VAT
£13,361.54 ex VAT

This item is out of stock

Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description Allied Telesis AT X950-52XTQM - switch - 48 ports - Managed - rack-mountable
Device Type Switch - 48 ports - L3+ - Managed - stackable
Enclosure Type Rack-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 48 x 1/2.5/5/10GBase-T + 4 x 40/100 Gigabit QSFP+ / QSFP28
Performance Switching fabric speed: 1.92 Tbps Forwarding rate: 1309 Mpps Latency: 2.3 µs
Capacity Priority queues per port: 8 VLANs supported: 4096
MAC Address Table Size 96K entries
Jumbo Frame Support 10KB
Routing Protocol OSPF, BGP-4, RIP-2, BGP, IGMPv2, IGMP, OSPFv2, PIM-SM, IGMPv3, OSPF for IPv6, OSPFv3, RIPng, MLDv2, MLD, VRRPv3, CIDR, MSTP, RSTP
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, CLI, SLP, SCP, SSH 6, SFTP, NTP
Features DHCP support, BOOTP support, ARP support, Syslog support, DoS attack prevention, port mirroring, DiffServ support, IPv6 support, sFlow, DHCP snooping, ACL support, QoS, VRF-Lite, DAI, PVST+, ECMP, STP Root Guard, UDLD, LLDP support, DNS relay, Energy Efficient Ethernet, MIB, NAC, 802.1x authentication, VoIP support, ERPS, OpenFlow support, EPSRing, VCStack, BPDU, Logical Link Control, ICMP, black hole routing, CPP, AMF, BIST, Cable fault locator (TDR), MIB II, DDM, policy based routing, AAA, CFM, LLDP-MED, storm protection, UDP, loopback detection
Compliant Standards IEEE 802.2, IEEE 802.3, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, X.509, IEEE 802.1ad, IEEE 802.1v, ANSI/TIA-1057, IEEE 802.1ab (LLDP), IEEE 802.3an, IEEE 802.3az, IEEE 802.3ba, IEEE 802.1AX, ITU-T G.8032, IEEE 802.3bj, IEEE 802.3bz
Power AC 100-240 V (47 - 63 Hz)
Dimensions (WxDxH) 44.1 cm x 44.9 cm x 4.4 cm
Weight 7.7 kg
Manufacturer Warranty 5-year warranty

General

Device Type Switch - 48 ports - L3+ - Managed - stackable
Enclosure Type Rack-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 48 x 1/2.5/5/10GBase-T + 4 x 40/100 Gigabit QSFP+ / QSFP28
Performance Switching fabric speed: 1.92 Tbps Forwarding rate: 1309 Mpps Latency: 2.3 µs
Capacity Priority queues per port: 8 VLANs supported: 4096
MAC Address Table Size 96K entries
Jumbo Frame Support 10KB
Max Units In A Stack 8
Routing Protocol OSPF, BGP-4, RIP-2, BGP, IGMPv2, IGMP, OSPFv2, PIM-SM, IGMPv3, OSPF for IPv6, OSPFv3, RIPng, MLDv2, MLD, VRRPv3, CIDR, MSTP, RSTP
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, CLI, SLP, SCP, SSH 6, SFTP, NTP
Encryption Algorithm DES, Triple DES, RSA, MD5, AES, TLS, SHA-1, SSL 3.0, SSL 2.0, PEAP, TTLS, DSA, ECDSA, PKI, 128-bit AES, 192-bit AES, 256-bit AES, SHA-2, 256-bit SHA-2, 384-bit SHA-2, 512-bit SHA-2, TLS 1.2, RNG, 224-bit SHA-2, CRL, CCM, CMAC, GCM, XTS, DRBG
Authentication Method Secure Shell (SSH), RADIUS, X.509 certificates, TACACS+, Secure Shell v.2 (SSH2), Extensible Authentication Protocol (EAP)
Features DHCP support, BOOTP support, ARP support, Syslog support, DoS attack prevention, port mirroring, DiffServ support, IPv6 support, sFlow, DHCP snooping, ACL support, QoS, VRF-Lite, DAI, PVST+, ECMP, STP Root Guard, UDLD, LLDP support, DNS relay, Energy Efficient Ethernet, MIB, NAC, 802.1x authentication, VoIP support, ERPS, OpenFlow support, EPSRing, VCStack, BPDU, Logical Link Control, ICMP, black hole routing, CPP, AMF, BIST, Cable fault locator (TDR), MIB II, DDM, policy based routing, AAA, CFM, LLDP-MED, storm protection, UDP, loopback detection
Compliant Standards IEEE 802.2, IEEE 802.3, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, X.509, IEEE 802.1ad, IEEE 802.1v, ANSI/TIA-1057, IEEE 802.1ab (LLDP), IEEE 802.3an, IEEE 802.3az, IEEE 802.3ba, IEEE 802.1AX, ITU-T G.8032, IEEE 802.3bj, IEEE 802.3bz
RAM 4 GB DDR SDRAM
Flash Memory 4 GB

Expansion / Connectivity

Interfaces 48 x 1/2.5/5/10GBase-T RJ-45 4 x 100Gbit/40Gbit LAN QSFP28/QSFP+ uplink 1 x management (Gigabit LAN) RJ-45 1 x USB 1 x console RJ-45

Power

Power Device Internal power supply - hot-plug
Max Supported Qty 2
Voltage Required AC 100-240 V (47 - 63 Hz)
Power Consumption Operational 300 watt

Miscellaneous

Compliant Standards FCC Class A certified, UL, TUV, cUL, EN 61000-3-2, EN 61000-3-3, EN55024, UL 60950-1, EN 60950-1, EN 60825-1, HMAC, AS/NZS 60950, CAN/CSA C22.2 No. 60950-1-03, VCCI Class A, China RoHS, TLS v1.2, EN 55032 Class A, EU RoHS

Software / System Requirements

Software Included Alliedware Plus

Dimensions & Weight

Width 44.1 cm
Depth 44.9 cm
Height 4.4 cm
Weight 7.7 kg

Dimensions & Weight (Shipping)

Shipping Weight 11.26 kg

Manufacturer Warranty

Service & Support Limited warranty - 5 years

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 50 °C
Humidity Range Operating 5 - 90% (non-condensing)
Min Storage Temperature -25 °C
Max Storage Temperature 70 °C
Humidity Range Storage 5 - 95% (non-condensing)
Product features

Smart City and IoT networks

Large switching and routing tables support Smart City networks and the Internet of Things (IoT). The x950 series meets the increasing demand for the convergence of multiple services.

Security features

The x950 series is packed with advanced security features to protect the network - from the edge to the core. This includes powerful control over network traffic types and protection against attacks.

Perfect choice for distributed environments

The convergence of network services has led to increasing demand for highly available networks with minimal downtime. Virtual Chassis Stacking, in conjunction with link aggregation, provides a network with no single point of failure, and a resilient solution for high-availability applications. The x950 series can form a VCStack, at any port speed, for enhanced resiliency and simplified management. With VCStack over Long Distance (VCStack LD), stacks can also be created over long-distance fiber links, making it the perfect choice for distributed environments.

Reliable switch

Designed with reliability in mind, the x950 series ensures the continual delivery of essential services. Hot-swappable components, such as XEMs, fans and load-sharing power supplies, pair with near-hitless online stack reconfiguration to ensure that maintenance doesn't affect network uptime.

Environmentally friendly

The x950 series automatically reduces power consumption whenever there is no traffic on a port, reducing operating costs.
Key selling points
  • Smart City and IoT networks
  • Security features
  • Perfect choice for distributed environments
  • Reliable switch
  • Environmentally friendly
References

MPN: AT-X950-52XTQM

What our Customers think about us!

Trustpilot

What our Customers think about us!

Trustpilot
Page generated at: 04/06/2026 01:29:01