Broadcom NetXtreme E-Series N225P
Network adapter | OCP 3.0 | 10Gb Ethernet/25Gb Ethernet x 2
More like this
In this category:
Main Specification
| Product Description | Broadcom NetXtreme E-Series N225P - network adapter - OCP 3.0 - 10Gb Ethernet/25Gb Ethernet x 2 |
|---|---|
| Device Type | Network adapter |
| Form Factor | Plug-in card |
| Interface (Bus) Type | Open Compute Project mezzanine (OCP) 3.0 |
| Ports | 10Gb Ethernet/25Gb Ethernet x 2 |
| Weight | 91 g |
| Data Link Protocol | 10GbE, 25GbE |
| Processor | Broadcom BCM57414 |
| Compliant Standards | IEEE 802.3ap, IEEE 802.3az |
General
| Device Type | Network adapter |
|---|---|
| Form Factor | Plug-in card |
| Interface (Bus) Type | Open Compute Project mezzanine (OCP) 3.0 |
Networking
| Ports | 10Gb Ethernet/25Gb Ethernet x 2 |
|---|---|
| Connectivity Technology | Wired |
| Data Link Protocol | 10 Gigabit Ethernet, 25 Gigabit Ethernet |
| Features | WOL, IPv6 support, DCBX support, IPv4 support, PXE support, LSO, LRO, RSS, UEFI support, SR-IOV, DCB, TSO, MSI-X, GRE, iSCSI boot, PFC, NC-SI, VXLAN, NVGRE, FLR, MSI, Jumbo Frames support (up to 9000 bytes), MCTP over SMBus, TruFlow, Interrupt coalescing, VMMQ, ETS, QCN, GENEVE support, Low Latency RDMA over RoCE, OCP 3.0 support, vSwitch Acceleration, tunnel-aware stateless offloads, SMBus 2.0, NetQueue |
| Compliant Standards | IEEE 802.3ap, IEEE 802.3az |
Processor / Memory
| Processor | Broadcom BCM57414 |
|---|
Expansion / Connectivity
| Interfaces | 2 x 10Gb Ethernet/25Gb Ethernet - SFP28 |
|---|
Miscellaneous
| Compliant Standards | EMC |
|---|
Dimensions & Weight
| Weight | 91 g |
|---|
Environmental Parameters
| Min Operating Temperature | 0 °C |
|---|---|
| Max Operating Temperature | 55 °C |
Product features
Enhanced connectivity
Equipped with two SFP28 connectors, the Broadcom NetXtreme E-Series N225P network adapter offers versatile 10Gb and 25Gb Ethernet connectivity, ensuring high-speed data transfers and efficient network performance.Advanced networking features
This network adapter supports a wide range of features such as Data Center Bridging (DCB), Enhanced Transmission Selection (ETS), and Low Latency RDMA over Converged Ethernet (RoCE), enhancing data center operations and network efficiency.Comprehensive protocol support
With support for both IPv4 and IPv6, the N225P ensures future-proof networking capabilities. Jumbo Frames, Large Receive Offload (LRO), and Large Send Offload (LSO) support further optimize data flow for improved network performance.Virtualization and management
Features like Single Root I/O Virtualization (SR-IOV), Network Virtualization using Generic Routing Encapsulation (NVGRE), and Virtual Extensible LAN (VXLAN) support make the N225P ideal for advanced virtualized environments and cloud deployments.Energy-efficient design
Incorporating IEEE 802.3az (Energy Efficient Ethernet), the Broadcom NetXtreme E-Series N225P minimizes power consumption during periods of low data activity, contributing to reduced operational costs and a greener network.Key selling points
- OCP NIC 3.0-compliant
- Line-rate throughput from 1 Gb/s to 200 Gb/s
- 2-port support
- DAC, copper, and fiber connectivity
- PCIe 3.0, PCIe 4.0 host interface
- 25 G, 50 G PAM-4 SerDes
- TruFlow-configurable packet processor for virtual switch acceleration
- BroadSAFE technology provides Silicon Root of Trust, secure boot, and secure key storage
- TruManage for cloud-scale manageability
- On-chip tunneling protocol processing for Geneve, VXLAN, and NVGRE
- Multi-host with ECN marking
- Hardware-based low-latency RoCE v1/v2
- SR-IOV up to 1K VFs
- GPUdirect acceleration
- PXE, UEFI network boot
References
MPN: BCM957414N4140C
Customers Also Bought
What our Customers think about us!
Page generated at:
14/06/2026 02:10:00