Cisco Catalyst 9200CX

Network Advantage | switch | compact | L3 | Managed | 12 x 10/100/1000 (PoE+) + 2 x 1000Base-T + 2 x 10 Gigabit SFP+ (uplink) | rack-mountable | PoE+ (240 W)

MPN C9200CX-12P-2X2G-A
Manufacturer CISCO ENT NET
QuickCode 1670508
Qty immediately available 0
Total stock 0
£11,999.99 inc VAT
£9,999.99 ex VAT

This item is out of stock

Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description Cisco Catalyst 9200CX - Network Advantage - switch - compact - 12 ports - Managed - rack-mountable
Device Type Switch - 12 ports - L3 - Managed
Enclosure Type Rack-mountable 1U
Subtype Gigabit Ethernet
Ports 12 x 10/100/1000 (PoE+) + 2 x 1000Base-T + 2 x 10 Gigabit SFP+ (uplink)
Power Over Ethernet (PoE) PoE+
PoE Budget 240 W
Performance Switching capacity: 120 Gbps Forwarding rate: 95.23 Mpps Packet buffer size: 6 MB
Capacity Virtual networks: 16 IPv4 routes: 14000 Direct IPv4 routes: 10000 Indirect IPv4 routes: 4000 IPv4 routing entries: 4000 IPv6 routing entries: 2000 Multicast scale: 1000 QoS scale entries: 1000 ACL scale entries: 1600 Flexible NetFlow entries: 16000 VLAN IDs: 4096 PVST instances: 128 STP Virtual Ports for PVST: 13000 STP Virtual Ports for MST: 13000
MAC Address Table Size 32000 entries
Jumbo Frame Support 9198 bytes
Routing Protocol OSPF, RIP, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MSTP
Remote Management Protocol SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF, YANG
Features ACL support, QoS, Rapid PVST+, fanless, SRR, PXE support, RSPAN, NetFlow, Energy Efficient Ethernet, MIB, CoS, FNF, 802.1x authentication, DSCP support, MACsec support, CoPP, SPAN, EEM, PIM, FHS, PVLAN support, CIR
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3at
Power AC 100-240 V (50/60 Hz)
Dimensions (WxDxH) 26.9 cm x 24.4 cm x 4.4 cm
Weight 2.99 kg
Manufacturer Warranty Limited lifetime warranty

General

Device Type Switch - 12 ports - L3 - Managed
Enclosure Type Rack-mountable 1U
Subtype Gigabit Ethernet
Ports 12 x 10/100/1000 (PoE+) + 2 x 1000Base-T + 2 x 10 Gigabit SFP+ (uplink)
Power Over Ethernet (PoE) PoE+
PoE Budget 240 W
Performance Switching capacity: 120 Gbps Forwarding rate: 95.23 Mpps Packet buffer size: 6 MB
Capacity Virtual networks: 16 IPv4 routes: 14000 Direct IPv4 routes: 10000 Indirect IPv4 routes: 4000 IPv4 routing entries: 4000 IPv6 routing entries: 2000 Multicast scale: 1000 QoS scale entries: 1000 ACL scale entries: 1600 Flexible NetFlow entries: 16000 VLAN IDs: 4096 PVST instances: 128 STP Virtual Ports for PVST: 13000 STP Virtual Ports for MST: 13000
MAC Address Table Size 32000 entries
Jumbo Frame Support 9198 bytes
Routing Protocol OSPF, RIP, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MSTP
Remote Management Protocol SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF, YANG
Encryption Algorithm 128-bit AES
Features ACL support, QoS, Rapid PVST+, fanless, SRR, PXE support, RSPAN, NetFlow, Energy Efficient Ethernet, MIB, CoS, FNF, 802.1x authentication, DSCP support, MACsec support, CoPP, SPAN, EEM, PIM, FHS, PVLAN support, CIR
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3at
RAM 4 GB
Flash Memory 8 GB
Built-in Devices RFID tag
Status Indicators Power

Expansion / Connectivity

Interfaces 12 x 1000Base-T RJ-45 PoE+ - 30 W 2 x 1000Base-T RJ-45 2 x 10GBase-X SFP+ uplink 1 x USB 2.0 1 x console (micro-USB)
Expansion Slots 1 (total) / 1 (free) x SD Memory Card

Power

Power Device Internal power supply
Power Provided 310 watt
Voltage Required AC 100-240 V (50/60 Hz)

Miscellaneous

MTBF 553,140 hours
Compliant Standards Plug and Play, CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN 61000-6-1, AS/NZS 60950-1, CCC, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, CNS 13438, EN 55022 Class A, FCC CFR47 Part 15 B Class A, EN 300 386, KN32, KN35, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, V-3 Class A, TCVN 7317, CISPR 35

Dimensions & Weight

Width 26.9 cm
Depth 24.4 cm
Height 4.4 cm
Weight 2.99 kg

Manufacturer Warranty

Service & Support Limited warranty - replacement - lifetime - response time: next business day Technical support - consulting - 90 days

Environmental Parameters

Min Operating Temperature -5 °C
Max Operating Temperature 45 °C
Humidity Range Operating 5 - 90% (non-condensing)
Min Storage Temperature -40 °C
Max Storage Temperature 70 °C
Humidity Range Storage 5 - 90% (non-condensing)
Product features

CONFIGURATION

12 x 10/100/1000M Ethernet with PoE+, 2 x 10G SFP+ and 2 x 1G Ethernet uplinks, 240W total PoE budget

IT SIMPLIFIED

Catalyst 9200 Series switches simplify complexity, optimize IT, and reduce operational costs with Cisco UADP ASIC and Cisco IOS XE providing consistency, intelligence and automation

SECURE

Enhanced security with MACsec encryption, full flexible NetFlow, and trustworthy solutions that protect the integrity of the hardware as well as the software and all data that flows through the switch

COMPACT

Compact and fanless form factor for versatile deployments out of IT rooms with Catalyst 9200 equivalent features plus flexible power source options (select models) and advanced layer 3 support

MANAGEMENT

Choice of CLI, Cisco Catalyst Center (formerly Cisco DNA Center) on-premises management, or cloud monitoring for Catalyst on Meraki dashboard
Key selling points
  • Supports up to 16,000 Flexible NetFlow entries for comprehensive traffic analysis
  • Fanless design ensures silent operation, ideal for noise-sensitive environments
  • Rack-mountable with a compact form factor, saving valuable space in data centers
  • Compliant with a wide range of standards including IEEE 802.1D/Q/ae and more for broad compatibility
  • Manageable via CLI, NETCONF, RESTCONF, and SNMP for flexible administration
References

MPN: C9200CX-12P-2X2G-A

What our Customers think about us!

What our Customers think about us!

Page generated at: 04/06/2026 06:21:13