Cisco C9350-48T

Switch | L3 | Managed | 48 x 10/100/1000 | desktop, rack-mountable

MPN C9350-48T
Manufacturer CISCO ENT NET
QuickCode 1723536
Qty immediately available 0
Total stock 0
£11,999.99 inc VAT
£9,999.99 ex VAT

This item is out of stock

Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description Cisco C9350-48T - switch - 48 ports - Managed - rack-mountable
Device Type Switch - 48 ports - L3 - Managed - stackable
Enclosure Type Rack-mountable 1U
Subtype Gigabit Ethernet
Ports 48 x 10/100/1000
Performance Switching capacity: 496 Gbps Stacking bandwidth: 2096 Gbps Forwarding rate: 369.024 Mpps Forwarding rate with stacking: 1559.424 Mpps
Capacity VLAN IDs: 4094 PVST instances: up to 10000 STP Virtual Ports for PVST: 16000 STP Virtual Ports for MST: 100000 Switched virtual interfaces (SVIs): 2000 MAC addresses: 64000 IPv4 routes: 192000 IPv6 routes: 96000 ARP entries: 64000 IPv6 neighbor discovery: 4000 IGMP snooping groups: 8000 MLD groups: 4000 IPv4 routes (Multicast): 8000 IPv6 routes (Multicast): 4000 IPv4 QoS ACL scale: 2000 IPv6 QoS ACL scale: 2000 IPv4 security ACL scale: 5000 IPv6 security ACL scale: 25000 NetFlow entries: 64000 Packet buffer size: 36
MAC Address Table Size 128K entries
Jumbo Frame Support 9126 bytes
Routing Protocol BGP-4, BGP-6, IS-ISv4, RIP-2, RIPng, EIGRP, EIGRP for IPv6, PIM-SM, OSPFv3
Remote Management Protocol SSH, CLI, NETCONF, RESTCONF, YANG
Features Cisco StackWise Technology, ARP support, VLAN support, IGMP support, Bandwidth Shaping, BGP-4, Cisco Trust Anchor module, EIGRP Stub Routing, FHS, GIR mode, HQoS, High Availability, image signing, IS-IS, IP-routing, LACP support, MQC, MLD, OSPF, PIM-SM snooping, PIM-SSM snooping, PAgP support, PIM, PVLAN support, QinQ VLAN, QoS, RSTP, secure boot, SMU, SSO, STP support, SPQ, traffic metering, VOQ, VLAN mapping, FNF, IPFIX, out-of-band management, RFID authentication, ZTP
Compliant Standards IEEE 802.1Q, IEEE 802.3ad (LACP), IEEE 802.1x
Power Redundancy Optional
Dimensions (WxDxH) 44.5 cm x 38.3 cm x 4.4 cm
Weight 6.26 kg
System Requirements Cisco IOS XE 17.18.1 or later
Manufacturer Warranty Limited lifetime warranty

General

Device Type Switch - 48 ports - L3 - Managed - stackable
Enclosure Type Desktop, rack-mountable 1U
Subtype Gigabit Ethernet
Ports 48 x 10/100/1000
Performance Switching capacity: 496 Gbps Stacking bandwidth: 2096 Gbps Forwarding rate: 369.024 Mpps Forwarding rate with stacking: 1559.424 Mpps
Capacity VLAN IDs: 4094 PVST instances: up to 10000 STP Virtual Ports for PVST: 16000 STP Virtual Ports for MST: 100000 Switched virtual interfaces (SVIs): 2000 MAC addresses: 64000 IPv4 routes: 192000 IPv6 routes: 96000 ARP entries: 64000 IPv6 neighbor discovery: 4000 IGMP snooping groups: 8000 MLD groups: 4000 IPv4 routes (Multicast): 8000 IPv6 routes (Multicast): 4000 IPv4 QoS ACL scale: 2000 IPv6 QoS ACL scale: 2000 IPv4 security ACL scale: 5000 IPv6 security ACL scale: 25000 NetFlow entries: 64000 Packet buffer size: 36
MAC Address Table Size 128K entries
Jumbo Frame Support 9126 bytes
Routing Protocol BGP-4, BGP-6, IS-ISv4, RIP-2, RIPng, EIGRP, EIGRP for IPv6, PIM-SM, OSPFv3
Remote Management Protocol SSH, CLI, NETCONF, RESTCONF, YANG
Authentication Method Secure Shell (SSH)
Features Cisco StackWise Technology, ARP support, VLAN support, IGMP support, Bandwidth Shaping, BGP-4, Cisco Trust Anchor module, EIGRP Stub Routing, FHS, GIR mode, HQoS, High Availability, image signing, IS-IS, IP-routing, LACP support, MQC, MLD, OSPF, PIM-SM snooping, PIM-SSM snooping, PAgP support, PIM, PVLAN support, QinQ VLAN, QoS, RSTP, secure boot, SMU, SSO, STP support, SPQ, traffic metering, VOQ, VLAN mapping, FNF, IPFIX, out-of-band management, RFID authentication, ZTP
Compliant Standards IEEE 802.1Q, IEEE 802.3ad (LACP), IEEE 802.1x
RAM 16 GB
Flash Memory 18 GB
Status Indicators System, port transmission speed, status

Expansion / Connectivity

Interfaces 48 x 1000Base-T RJ-45 1 x USB Type C console 1 x USB Type C host 1 x 10/100/1000Base-T RJ-45 management 1 x console RJ-45 2 x network stack device 1 x USB 3.0
Expansion Slots 1 (total) / 1 (free) x Stacking Module

Power

Power Device Internal power supply
Installed Qty 1
Max Supported Qty 3
Power Redundancy Optional
Power Redundancy Scheme N+1 (with optional power supply)

Miscellaneous

MTBF 357,320 hours
Compliant Standards 47 CFR Part 15 Class A, AS/NZS 60950-1:2011, CAN/CSA-C22.2 No. 60950-1-07, CAN/CSA-C22.2 No. 62368-1-14, CISPR 24:2010+A1:2015, CISPR 32 Second Edition Class A, CNS13438:2006, EN 300 386, EN 300 386 V1.6.1, EN 55024:2010+A1:2015, EN 55032:2012, EN 61000-3-2:2014, EN 61000-3-3:2013, EN55024:2010:A1, GB 4943-95, ICES-003 issue 6:2016, IEC 60950-1, IEC 60950-1:2006, KN32:2015 Class A, KN35:2015, NOM-019-SCFI-1998, TCVN 7189: 2009 Class A, TCVN 7317:2003, UL 60950-1 Second Edition, UL 62368-1 Second Edition

Software / System Requirements

OS Required Cisco IOS XE 17.18.1 or later

Dimensions & Weight

Width 44.5 cm
Depth 38.3 cm
Height 4.4 cm
Weight 6.26 kg

Manufacturer Warranty

Service & Support Limited warranty - advance parts replacement - lifetime - response time: next business day

Environmental Parameters

Min Operating Temperature -5 °C
Max Operating Temperature 45 °C
Humidity Range Operating 10 - 95% RH (non-condensing)
Min Storage Temperature -40 °C
Max Storage Temperature 75 °C
Humidity Range Storage 10 - 95% RH (non-condensing)
Product features

Efficient network performance

With a switching capacity of 496 Gbps and forwarding rates up to 369.024 Mpps, the Cisco C9350-48T ensures that data is transmitted effectively, even during peak usage.

Flexible management options

The device supports various remote management protocols including SSH, CLI, and NETCONF, making it easy to configure and maintain the network from any location.

High availability features

The switch offers stateful switchover, ensuring minimal downtime and continuous operation during system transitions or failures.

Advanced quality of service support

Quality of Service (QoS) features prioritize traffic, allowing for better bandwidth management and improved performance for critical applications.

Scalable architecture

The Cisco C9350-48T is stackable and supports a large number of VLANs and multicast groups, ensuring a versatile solution that can grow with the needs of the business.
Key selling points
  • Switching capacity of 496 Gbps
  • Supports up to 48 ports for expansive connectivity
  • High availability with stateful switchover
  • Flexible network management options including SSH and RESTCONF
  • Compliant with multiple industry standards for safety and performance
References

MPN: C9350-48T

What our Customers think about us!

What our Customers think about us!

Page generated at: 04/06/2026 01:11:54