Cisco Wireless 9172I
Radio access point | Wi-Fi 7, 1GbE, 2.5GbE | Wi-Fi 7, Bluetooth | 2.4 GHz, 5 GHz, 6 GHz | Configured
Sorry there is no image for this product
More like this
In this category:
Main Specification
| Product Description | Cisco Wireless 9172I - radio access point - Wi-Fi 7, Bluetooth |
|---|---|
| Device Type | Radio access point |
| Form Factor | External - indoor |
| RAM | 4096 MB |
| Flash Memory | 16 GB |
| Data Link Protocol | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IEEE 802.11ax (Wi-Fi 6), IEEE 802.11be (Wi-Fi 7), Ethernet, Fast Ethernet, Gigabit Ethernet, 2.5 Gigabit Ethernet, Bluetooth LE |
| Frequency Band | 2.4 GHz, 5 GHz, 6 GHz |
| Capacity | Spatial streams: 8 |
| OS Required | Cisco IOS XE 17.15.2 or later |
| Power Over Ethernet (PoE) Supported | UPOE |
| Pricing Type | Configured |
| Dimensions (WxDxH) | 20 cm x 20 cm x 5.3 cm |
| Weight | 874 g |
| Manufacturer Warranty | Limited lifetime warranty |
General
| Device Type | Radio access point |
|---|---|
| Ruggedized Design | Indoor |
| Width | 20 cm |
| Depth | 20 cm |
| Height | 5.3 cm |
| Weight | 874 g |
Processor / Memory / Storage
| RAM | 4096 MB |
|---|---|
| Flash Memory | 16 GB |
Networking
| Form Factor | External |
|---|---|
| Connectivity Technology | Wireless |
| Data Transfer Rate | 9 Gbps |
| Line Coding Format | 4096 QAM, OFDMA |
| Data Link Protocol | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IEEE 802.11ax (Wi-Fi 6), IEEE 802.11be (Wi-Fi 7), Ethernet, Fast Ethernet, Gigabit Ethernet, 2.5 Gigabit Ethernet, Bluetooth LE |
| Spread Spectrum Method | OFDMA |
| Frequency Band | 2.4 GHz, 5 GHz, 6 GHz |
| Capacity | Spatial streams: 8 |
| Status Indicators | Status |
| Features | Multi-Link Operation (MLO), preamble puncturing, Target Wake Time (TWT), BSS Coloring, Maximum Ratio Combining (MRC), packet aggregation A-MPDU, packet aggregation A-MSDU, Dynamic Frequency Selection (DFS), cyclic shift diversity (CSD), beamforming technology, 802.1x authentication, uplink/downlink MU-MIMO, image signing, secure boot, Cisco Trust Anchor module, Maximal Ratio Combining |
| Encryption Algorithm | WPA3, WPA2, 256-bit SHA, AES, 128-bit AES-GCMP, 256-bit AES-GCMP, EAP-TLS, EAP-TTLS, PEAP, EAP-MSCHAPv2, EAP-FAST, PEAPv1, EAP-GTC, EAP-SIM, MSCHAPv2 |
| Authentication Method | MS-CHAP, MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST, EAP-SIM |
| Compliant Standards | IEEE 802.11, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11be, IEEE 802.3bt, IEEE 802.3at, IEEE 802.3af, IEEE 802.3, IEEE 802.3ab, IEEE 802.11h, IEEE 802.11d, IEEE 802.11i, Wi-Fi CERTIFIED 6, Wi-Fi CERTIFIED 6E, Wi-Fi CERTIFIED 7, IEEE 802.1x |
Aerial
| Antenna | Internal |
|---|---|
| Directivity | Omni-directional |
Internet of Things (IoT)
| Internet of Things (IoT) Compatible | Yes |
|---|
Expansion / Connectivity
| Interfaces | 1 x 10M/100M/1G/2.5 Gigabit Ethernet - RJ-45 1 x management - RJ-45 1 x USB 2.0 |
|---|
Miscellaneous
| Compliant Standards | IEC 60950-1, IEC 62368-1 Third Edition, EN 60950-1, EN 62368-1 Third Edition, UL 60950-1, UL 62368-1 Third Edition, CAN/CSA-C22.2 No. 60950-1, CAN/CSA-C22.2 No. 62368-1 Third Edition, AS/NZS 60950-1, AS/NZS 62368-1 Third Edition, UL 2043, Class 3, CISPR 32:2015+AMD1:2019, EN 55032:2015/A11:2020, EN IEC 61000-3-2:2019/A1:2021, EN 61000-3-3:2013+A1:2019, AS/NZS CISPR32:2015+AMD1:2020, FCC 47 CFR part 15 B class B, ICES-003 issue 7 Class B, VCCI-CISPR 32:2016, CNS 13438 (2006), KS C 9832:2019, QCVN 118:2018/BTTTT, EN 55035:2017+A11:2020, KS C 9835:2019, EN 301 489-1 V2.2.3 (2019-11), EN 301 489-17 V3.2.4 (2020-09), QCVN 18:2014, QCVN 112:2017/BTTTT, KS X 3124:2020, KS X 3126:2020, EN 61000-6-1:2019, EN 60601-1-2:2015 + A1:2021, EN 300 328, EN 301 893, EN 303 687, AS/NZS 4268, FCC CFR 47 Part 15C, RSP-100, RSS-GEN, RSS-247, LP0002, Japan Std. 66, Japan Std. 71, EN 50385:2017, AS/NZS 2772:2016, 47 CFR Part 2.1091, RSS-102, WEEE |
|---|---|
| Pricing Type | Configured |
Power
| Power Over Ethernet (PoE) Supported | UPOE |
|---|
Software / System Requirements
| OS Required | Cisco IOS XE 17.15.2 or later |
|---|
Manufacturer Warranty
| Service & Support | Limited warranty - replacement - lifetime - response time: 5 days |
|---|
Environmental Parameters
| Min Operating Temperature | 0 °C |
|---|---|
| Max Operating Temperature | 50 °C |
| Humidity Range Operating | 0 - 95% (non-condensing) |
Product features
Robust performance
The Cisco Wireless 9172I delivers data transfer rates of up to 9 Gbps, accommodating high traffic in busy environments. This ensures that both large files and multiple users can access connectivity without interruption.Advanced security protocols
Equipped with encryption standards including WPA2 and WPA3, this wireless access point secures all communications, preventing unauthorized access and ensuring data integrity across the network.Flexible connectivity options
With support for USB 2.0 and various Ethernet standards, including 10 M/100 M/1 G/2.5 Gigabit, the 9172I provides multiple interfaces for easy integration into existing network setups.Enhanced coverage
The internal omnidirectional antenna design allows for wide-ranging coverage, making the Cisco Wireless 9172I a solution for ensuring reliable connections in large areas.High capacity handling
Featuring up to 8 spatial streams, this access point effectively manages increased user capacity, supporting the growing demands of modern wireless users while maintaining strong performance.Key selling points
- Supports data transfer rates up to 9 Gbps
- Compatible with Wi-Fi 6 and Wi-Fi 7 technologies
- Ruggedized design suitable for indoor environments
- Multiple security features including WPA3 encryption
- Offers up to 8 spatial streams for capacity
References
MPN: CW9172I-CFG
What our Customers think about us!
Page generated at:
04/06/2026 05:33:07