Cisco Wireless 9176D1

Radio access point | Wi-Fi 7, 2.5GbE, 5GbE, 10GbE | Wi-Fi 7, Bluetooth | 2.4 GHz, 5 GHz, 6 GHz | Configured

product image

More like this

In this category: 
Power Over Ethernet Wireless Wireless Access Points
MPN CW9176D1-CFG
Manufacturer CISCO ENT NET
QuickCode 1723357
Qty immediately available 0
Total stock 0
£11,999.99 inc VAT
£9,999.99 ex VAT

This item is out of stock

Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description Cisco Wireless 9176D1 - radio access point - Wi-Fi 7, Bluetooth
Device Type Radio access point
Form Factor External - indoor
RAM 4096 MB
Flash Memory 16 GB
Data Link Protocol IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IEEE 802.11ax (Wi-Fi 6), IEEE 802.11be (Wi-Fi 7), Ethernet, Fast Ethernet, Gigabit Ethernet, 2.5 Gigabit Ethernet, 5 Gigabit Ethernet, 10 Gigabit Ethernet, Bluetooth LE
Frequency Band 2.4 GHz, 5 GHz, 6 GHz
Capacity Spatial streams: 4
OS Required Cisco IOS XE 17.15.2 or later
Power Over Ethernet (PoE) Supported UPOE
Pricing Type Configured
Dimensions (WxDxH) 24 cm x 25 cm x 5.1 cm
Weight 1.56 kg
Manufacturer Warranty Limited lifetime warranty

General

Device Type Radio access point
Ruggedized Design Indoor
Built-in Devices GPS, GNSS receiver
Width 24 cm
Depth 25 cm
Height 5.1 cm
Weight 1.56 kg

Processor / Memory / Storage

RAM 4096 MB
Flash Memory 16 GB

Networking

Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 18 Gbps
Line Coding Format 4096 QAM, OFDMA
Data Link Protocol IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IEEE 802.11ax (Wi-Fi 6), IEEE 802.11be (Wi-Fi 7), Ethernet, Fast Ethernet, Gigabit Ethernet, 2.5 Gigabit Ethernet, 5 Gigabit Ethernet, 10 Gigabit Ethernet, Bluetooth LE
Spread Spectrum Method OFDMA
Frequency Band 2.4 GHz, 5 GHz, 6 GHz
Capacity Spatial streams: 4
Status Indicators Status
Features 4x4:4 MU-MIMO technology, XOR, Multi-Link Operation (MLO), preamble puncturing, Target Wake Time (TWT), BSS Coloring, Maximum Ratio Combining (MRC), packet aggregation A-MPDU, packet aggregation A-MSDU, Dynamic Frequency Selection (DFS), cyclic shift diversity (CSD), beamforming technology, 802.1x authentication, uplink/downlink MU-MIMO, image signing, secure boot, Cisco Trust Anchor module, Maximal Ratio Combining, LLDP support, band steering
Encryption Algorithm WPA3, WPA2, 256-bit SHA, AES, 128-bit AES-GCMP, 256-bit AES-GCMP, EAP-TLS, EAP-TTLS, PEAP, EAP-MSCHAPv2, EAP-FAST, PEAPv1, EAP-GTC, EAP-SIM, MSCHAPv2
Authentication Method MS-CHAP, MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST, EAP-SIM
Compliant Standards IEEE 802.11, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11be, IEEE 802.3bt, IEEE 802.3at, IEEE 802.3af, IEEE 802.3, IEEE 802.3ab, IEEE 802.11h, IEEE 802.11d, IEEE 802.11i, Wi-Fi CERTIFIED 6, Wi-Fi CERTIFIED 6E, Wi-Fi CERTIFIED 7, IEEE 802.1x

Aerial

Antenna Internal
Directivity Directional

Internet of Things (IoT)

Internet of Things (IoT) Compatible Yes

Expansion / Connectivity

Interfaces 1 x 100M/1G/2.5/5/10 Gigabit Ethernet (UPOE) - RJ-45 1 x management - RJ-45 1 x USB 2.0

Miscellaneous

Compliant Standards IEC 60950-1, IEC 62368-1 Third Edition, EN 60950-1, EN 62368-1 Third Edition, UL 60950-1, UL 62368-1 Third Edition, CAN/CSA-C22.2 No. 60950-1, CAN/CSA-C22.2 No. 62368-1 Third Edition, AS/NZS 60950-1, AS/NZS 62368-1 Third Edition, UL 2043, Class 3, CISPR 32:2015+AMD1:2019, EN 55032:2015/A11:2020, EN IEC 61000-3-2:2019/A1:2021, EN 61000-3-3:2013+A1:2019, AS/NZS CISPR32:2015+AMD1:2020, FCC 47 CFR part 15 B class B, ICES-003 issue 7 Class B, VCCI-CISPR 32:2016, CNS 13438 (2006), KS C 9832:2019, QCVN 118:2018/BTTTT, EN 55035:2017+A11:2020, KS C 9835:2019, EN 301 489-1 V2.2.3 (2019-11), EN 301 489-17 V3.2.4 (2020-09), QCVN 18:2014, QCVN 112:2017/BTTTT, KS X 3124:2020, KS X 3126:2020, EN 61000-6-1:2019, EN 60601-1-2:2015 + A1:2021, EN 300 328, EN 301 893, EN 303 687, AS/NZS 4268, FCC CFR 47 Part 15C, RSP-100, RSS-GEN, RSS-247, LP0002, Japan Std. 66, Japan Std. 71, EN 50385:2017, AS/NZS 2772:2016, 47 CFR Part 2.1091, RSS-102, WEEE
Pricing Type Configured

Power

Power Over Ethernet (PoE) Supported UPOE
Power Device External power adapter / power injector (not included)

Software / System Requirements

OS Required Cisco IOS XE 17.15.2 or later

Manufacturer Warranty

Service & Support Limited warranty - replacement - lifetime - response time: 5 days

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 50 °C
Humidity Range Operating 10 - 90% (non-condensing)
Product features

Reliable performance

The Cisco Wireless 9176D1 supports a data transfer rate of 18 Gbps, providing fast and stable connectivity for multiple users and devices. It employs technologies such as beamforming and 4x4:4 MU-MIMO to optimize data distribution and enhance overall network efficiency.

Rugged design

This wireless access point is built to withstand tough indoor environments, operating within a temperature range of 0°C to 50°C and humidity levels between 10% and 90%. Its sturdy construction ensures long-lasting performance and reliability.

Secure connectivity

The device includes security features, such as multiple encryption algorithms and secure boot capabilities. These measures protect data and maintain connected devices' integrity, allowing for secure communications across the network.

Advanced connectivity options

Featuring support for various wireless standards like IEEE 802.11ax and IEEE 802.11be, the Cisco Wireless 9176D1 is IoT-compatible, making it a versatile solution for modern networking needs. It supports Power over Ethernet (UPOE) ensuring easy power management.

Comprehensive standards compliance

This access point meets a range of compliance standards, ensuring it is suitable for different regulatory environments. Its design reflects adherence to safety and performance standards that ensure reliability and safety in installations.
Key selling points
  • Data transfer rate of 18 Gbps
  • Ruggedized design suitable for indoor use
  • Support for multiple wireless standards including Wi-Fi 6 and Wi-Fi 7
  • Advanced security features including WPA3 and AES encryption
  • Capable of handling various environmental conditions
References

MPN: CW9176D1-CFG

What our Customers think about us!

Trustpilot

What our Customers think about us!

Trustpilot
Page generated at: 04/06/2026 21:22:49