D-Link Nuclias Connect DAP-2682
Radio access point | 1GbE | Wi-Fi 5 | 2.4 GHz, 5 GHz | wall / ceiling mountable (pack of 5)
Sorry there is no image for this product
Main Specification
| Product Description | D-Link Nuclias Connect DAP-2682 - radio access point - Wi-Fi 5 |
|---|---|
| Device Type | Radio access point |
| Packaged Quantity | 5 (specifications are for single item) |
| Form Factor | Wall / ceiling mountable - indoor |
| Data Link Protocol | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2, Ethernet, Fast Ethernet, Gigabit Ethernet |
| Frequency Band | 2.4 GHz, 5 GHz |
| Performance | Maximum data rate (2.4 GHz): 600 Mbps Maximum data rate (5 GHz): 1700 Mbps |
| Capacity | SSIDs per radio: 16 |
| Included Accessories | Wall/ceiling mounting kit |
| Power Over Ethernet (PoE) Supported | PoE+ |
| Dimensions (WxDxH) | 19 cm x 19 cm x 4.37 cm |
| Weight | 551.6 g |
General
| Packaged Quantity | 5 (specifications are for single item) |
|---|---|
| Device Type | Radio access point |
| Ruggedized Design | Indoor |
| Width | 19 cm |
| Depth | 19 cm |
| Height | 4.37 cm |
| Weight | 551.6 g |
Networking
| Form Factor | Wall / ceiling mountable |
|---|---|
| Connectivity Technology | Wireless |
| Data Transfer Rate | 2.3 Gbps |
| Data Link Protocol | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2, Ethernet, Fast Ethernet, Gigabit Ethernet |
| Network / Transport Protocol | DHCP, ARP, NTP, IPv6, Telnet, HTTP |
| Routing Protocol | IGMP |
| Remote Management Protocol | SNMP 1, SNMP 2c, SNMP 3, DHCP, NTP, CLI, Telnet, SSH, Syslog, RADIUS, HTTP |
| Frequency Band | 2.4 GHz, 5 GHz |
| Performance | Maximum data rate (2.4 GHz): 600 Mbps Maximum data rate (5 GHz): 1700 Mbps |
| Capacity | SSIDs per radio: 16 |
| Wi-Fi Rating | AC2300 |
| Status Indicators | Status |
| Features | MU-MIMO technology, beamforming technology, band steering, VLAN support, client isolation, Network Access Protection (NAP), Quality of Service (QoS), scalable, plastic housing, Wireless Distribution System (WDS) support, Access Point operational mode, WDS bridge, WDS access point, Wireless Client Mode, Auto Channel Select (ACS), Unscheduled Automatic Power Save Delivery (U-APSD), Wireless Scheduler, load balancing, WLAN partition, enable/disable SSID broadcast, rogue AP detection, Station Isolation, MAC address filtering, 802.1x authentication, DHCP server, IGMP snooping, ARP spoofing, Energy-Efficient Ethernet (EEE) |
| Encryption Algorithm | SSL, 64-bit WEP, 128-bit WEP, WPA-Personal, WPA2-Personal, WPA3-Personal, WPA-Enterprise, WPA2-Enterprise, WPA3-Enterprise, TKIP, AES |
| Authentication Method | Secure Shell (SSH), Radio Service Set ID (SSID), RADIUS |
| Compliant Standards | IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2, IEEE 802.11e, IEEE 802.1x, IEEE 802.3at, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3az |
Aerial
| Antenna | Internal |
|---|---|
| Antenna Qty | 4 |
Expansion / Connectivity
| Interfaces | 2 x 1000Base-T (PoE+) - RJ-45 |
|---|
Miscellaneous
| Included Accessories | Wall/ceiling mounting kit |
|---|---|
| MTBF | 341,897 hours |
| Compliant Standards | UL, FCC |
Power
| Power Over Ethernet (PoE) Supported | PoE+ |
|---|
Environmental Parameters
| Min Operating Temperature | 0 °C |
|---|---|
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 10 - 90% (non-condensing) |
Product features
Multi-mode makes the most of your network capabilities
In order to achieve optimal network performance, the DAP-2682 has several operational modes tailored to fit the individual needs of your network.In a world where time is money, speed is essential
The DAP-2682 delivers four times the speed of wireless N by supporting concurrent dual-band performance, while an added Gigabit LAN port allows for high-capacity backhaul to the wired network.Take a load off and let your AP do the hard work
The DAP-2682's load balancing feature spreads the workload between two or more access points to get optimal resource utilization, throughput and response time, while airtime fairness helps distribute equal amounts of air time to each connected client.Peak performance and discreet deployment
The DAP-2682's PoE function allows for easy installation and a simple, clean setup. No need to run extra power lines, no added hassle when configuring your hardwiring and no more cable clutter. Perfect for advanced installations in areas where power outlets are not readily available.Make every second count with advanced QoS
With the use of QoS, applications such as audio, video and voice are placed in order of high-to-low priority for an all-round smoother, uninterrupted Wi-Fi experience.Key selling points
- Easy to manage
- Superior throughput
- Band steering
- Simpler installation with less cable clutter
- Simple, soft-edge design
- Supports multiple VLANs for enhanced network management
References
MPN: DAP-2682-5
What our Customers think about us!
Page generated at:
04/06/2026 08:34:29