| Product Description |
D-Link DGS 1250-52X - switch - 52 ports - smart - rack-mountable |
| Device Type |
Switch - 52 ports - L3 Lite - smart - stackable |
| Enclosure Type |
Rack-mountable 1U |
| Subtype |
Gigabit Ethernet |
| Ports |
48 x 10/100/1000 + 4 x 10 Gigabit SFP+ |
| Performance |
Switching capacity: 176 Gbps
Forwarding performance: 130.95 Mpps |
| MAC Address Table Size |
32K entries |
| Jumbo Frame Support |
12KB |
| Routing Protocol |
IGMPv2, IGMP, static IP routing, IGMPv3, MLDv2, MLD |
| Remote Management Protocol |
SNMP 1, RMON 1, Telnet, SNMP 3, SNMP 2c, SSH-2, CLI |
| Features |
Flow control, auto-negotiation, ARP support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, port mirroring, store and forward, Broadcast Storm Control, half duplex mode, full duplex mode, Multicast Storm Control, Unicast Storm Control, sFlow, STP support, RSTP support, MSTP support, DHCP snooping, ACL support, QoS, MLD snooping, DAI, reset button, LLDP support, DHCP relay, LACP, Port Security, SNMP trap, DHCP client, GVRP, dual firmware images, SPQ, Multicast filtering function, TFTP client, ERPS, cable test, system log, IP source guard, DRR, BPDU, ICMP, NTP, AAA, WAC, LLDP-MED, WRR, HOL Blocking Prevention, loopback detection |
| Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3az |
| Power |
AC 120/230 V (50/60 Hz) |
| Dimensions (WxDxH) |
44 cm x 21 cm x 4.4 cm |
| Weight |
3.01 kg |
| Device Type |
Switch - 52 ports - L3 Lite - smart - stackable |
| Enclosure Type |
Rack-mountable 1U |
| Subtype |
Gigabit Ethernet |
| Ports |
48 x 10/100/1000 + 4 x 10 Gigabit SFP+ |
| Performance |
Switching capacity: 176 Gbps
Forwarding performance: 130.95 Mpps |
| MAC Address Table Size |
32K entries |
| Jumbo Frame Support |
12KB |
| Routing Protocol |
IGMPv2, IGMP, static IP routing, IGMPv3, MLDv2, MLD |
| Remote Management Protocol |
SNMP 1, RMON 1, Telnet, SNMP 3, SNMP 2c, SSH-2, CLI |
| Encryption Algorithm |
SSL, TLS, SSL 3.0, SSL 2.0, PEAP, TTLS |
| Authentication Method |
RADIUS, TACACS+, Secure Shell v.2 (SSH2), Extensible Authentication Protocol (EAP) |
| Features |
Flow control, auto-negotiation, ARP support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, port mirroring, store and forward, Broadcast Storm Control, half duplex mode, full duplex mode, Multicast Storm Control, Unicast Storm Control, sFlow, STP support, RSTP support, MSTP support, DHCP snooping, ACL support, QoS, MLD snooping, DAI, reset button, LLDP support, DHCP relay, LACP, Port Security, SNMP trap, DHCP client, GVRP, dual firmware images, SPQ, Multicast filtering function, TFTP client, ERPS, cable test, system log, IP source guard, DRR, BPDU, ICMP, NTP, AAA, WAC, LLDP-MED, WRR, HOL Blocking Prevention, loopback detection |
| Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3az |
| Processor |
: 1 GHz |
| RAM |
2 GB DDR3 SDRAM |
| Flash Memory |
64 MB |
| Status Indicators |
Error, fan, link/activity/speed, stack |