HPE Aruba CX 8360-48Y6C v2
Switch | L3 | Managed | 44 x 1/10/25 Gigabit SFP / SFP+ / SFP28 + 4 x 10 Gigabit / 25 Gigabit SFP+ / SFP28 + 4 x 40/100 Gigabit QSFP+ / QSFP28 + 2 x 40/100 Gigabit QSFP+ / QSFP28 | back to front airflow | rack-mountable
Main Specification
| Product Description | HPE Aruba CX 8360-48Y6C v2 - switch - 48 ports - Managed - rack-mountable |
|---|---|
| Device Type | Switch - 48 ports - L3 - Managed |
| Enclosure Type | Back to front airflow rack-mountable 1U |
| Subtype | 25 Gigabit Ethernet |
| Ports | 44 x 1/10/25 Gigabit SFP / SFP+ / SFP28 + 4 x 10 Gigabit / 25 Gigabit SFP+ / SFP28 + 4 x 40/100 Gigabit QSFP+ / QSFP28 + 2 x 40/100 Gigabit QSFP+ / QSFP28 |
| Performance | Switching capacity: 4.8 Tbps Switching capacity: 2.678 Mpps |
| Capacity | MAC addresses: 212992 IPv4 host table capacity: 145780 IPv6 host table capacity: 145780 IPv4 routes (Unicast): 606977 IPv6 routes (Unicast): 630784 IPv4 ACL entries (ingress): 65536 IPv6 ACL entries (ingress): 16384 MAC ACL entries (ingress): 65536 IPv4 ACL entries (egress): 8192 IPv6 ACL entries (egress): 2048 MAC ACL entries (egress): 8192 VLANs supported: 4094 IGMP groups: 7000 MLD groups: 7000 IPv4 routes (Multicast): 7000 IPv6 routes (Multicast): 7000 |
| Jumbo Frame Support | 9KB |
| Routing Protocol | OSPF, BGP-4, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, GRE, OSPFv3, MSDP, static IPv6 routing, policy-based routing (PBR), RIPng, MLDv2, MLD, CIDR, BGP-MP |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON, SNMP 3, TFTP, SSH, SSH 6, SFTP, ICMP |
| Features | Flow control, DHCP support, BOOTP support, ARP support, load balancing, VLAN support, IGMP snooping, Syslog support, port mirroring, IPv6 support, High Availability, sFlow, STP support, RSTP support, VRRP support, MSTP support, QoS, DHCP server, MLD snooping, ECMP, BFD, DWRR, DHCP relay, DCB, SNMP trap, dual firmware images, NDP, packet storm protection, SP, Loopback, ERPS, MACsec support, hot swappable 5 fans, ECN, BPDU, ICMP IRDP, 32MB packet buffer, VXLAN, Link Aggregation, RoCE v2, EVPN, fast leave, NTP, Private VLAN, Cisco IPSLA, IP forwarding support, IPv4 and IPv6 dual stack, DDoS Protection, IPv6 addressing, VSX, Aruba VSF, RPVST+, DNS support, UDP support, TCP support, BGP, UDLD, IPv6 multicasting |
| Compliant Standards | IEEE 802.3z, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1t, IEEE 802.1v, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3an, IEEE 802.3ba, IEEE 802.1AX, IEEE 802.3by, IEEE 802.3cc |
| Power | AC 100-240 V (47 - 63 Hz) |
| Power Redundancy | Yes |
| Dimensions (WxDxH) | 44.25 cm x 55.88 cm x 4.4 cm |
| Weight | 10.73 kg |
| Manufacturer Warranty | Limited lifetime warranty |
General
| Device Type | Switch - 48 ports - L3 - Managed |
|---|---|
| Enclosure Type | Back to front airflow rack-mountable 1U |
| Subtype | 25 Gigabit Ethernet |
| Ports | 44 x 1/10/25 Gigabit SFP / SFP+ / SFP28 + 4 x 10 Gigabit / 25 Gigabit SFP+ / SFP28 + 4 x 40/100 Gigabit QSFP+ / QSFP28 + 2 x 40/100 Gigabit QSFP+ / QSFP28 |
| Performance | Switching capacity: 4.8 Tbps Switching capacity: 2.678 Mpps |
| Capacity | MAC addresses: 212992 IPv4 host table capacity: 145780 IPv6 host table capacity: 145780 IPv4 routes (Unicast): 606977 IPv6 routes (Unicast): 630784 IPv4 ACL entries (ingress): 65536 IPv6 ACL entries (ingress): 16384 MAC ACL entries (ingress): 65536 IPv4 ACL entries (egress): 8192 IPv6 ACL entries (egress): 2048 MAC ACL entries (egress): 8192 VLANs supported: 4094 IGMP groups: 7000 MLD groups: 7000 IPv4 routes (Multicast): 7000 IPv6 routes (Multicast): 7000 |
| Jumbo Frame Support | 9KB |
| Routing Protocol | OSPF, BGP-4, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, GRE, OSPFv3, MSDP, static IPv6 routing, policy-based routing (PBR), RIPng, MLDv2, MLD, CIDR, BGP-MP |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON, SNMP 3, TFTP, SSH, SSH 6, SFTP, ICMP |
| Encryption Algorithm | 128-bit AES, 256-bit AES |
| Authentication Method | Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2), RADSEC |
| Features | Flow control, DHCP support, BOOTP support, ARP support, load balancing, VLAN support, IGMP snooping, Syslog support, port mirroring, IPv6 support, High Availability, sFlow, STP support, RSTP support, VRRP support, MSTP support, QoS, DHCP server, MLD snooping, ECMP, BFD, DWRR, DHCP relay, DCB, SNMP trap, dual firmware images, NDP, packet storm protection, SP, Loopback, ERPS, MACsec support, hot swappable 5 fans, ECN, BPDU, ICMP IRDP, 32MB packet buffer, VXLAN, Link Aggregation, RoCE v2, EVPN, fast leave, NTP, Private VLAN, Cisco IPSLA, IP forwarding support, IPv4 and IPv6 dual stack, DDoS Protection, IPv6 addressing, VSX, Aruba VSF, RPVST+, DNS support, UDP support, TCP support, BGP, UDLD, IPv6 multicasting |
| Compliant Standards | IEEE 802.3z, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1t, IEEE 802.1v, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3an, IEEE 802.3ba, IEEE 802.1AX, IEEE 802.3by, IEEE 802.3cc |
| Processor | 1: 1.8 GHz |
| RAM | 16 GB |
| Flash Memory | 32 GB |
| Status Indicators | Port transmission speed |
Expansion / Connectivity
| Interfaces | 44 x 1/10/25Gbit LAN SFP28 4 x 10/25Gbit LAN SFP28 with MACsec 4 x 40/100Gbit LAN QSFP28 2 x 40/100Gbit LAN QSFP28 with MACsec 1 x management (LAN) RJ-45 1 x console (USB) Type C 1 x USB Type A 1 x serial (console) RJ-45 |
|---|
Power
| Power Device | Internal power supply - hot-plug |
|---|---|
| Installed Qty | 2 |
| Max Supported Qty | 2 |
| Power Redundancy | Yes |
| Power Redundancy Scheme | 1+1 |
| Voltage Required | AC 100-240 V (47 - 63 Hz) |
Miscellaneous
| Rack Mounting Kit | Included |
|---|---|
| Compliant Standards | CISPR 24, ICES-003 Class A, RoHS, Laser Class 1, UL 60950-1, VCCI Class A, EN 50581:2012, CNS 13438, CSA 22.2 No. 60950-1, EN 61000-3-3:2013, EN 55024:2010, FCC CFR47 Part 15 B Class A, CNS 13438 Class A, EN 55032:2015, CISPR 32 Class A, EN 61000-3-2:2014 Class A, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, CISPR 35, EN 60825-1:2014, IEC 60825-1:2014, EN 55035:2017, IEC 62368-1: 2014, EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, EN 62368-1:2014 Second Edition |
Software / System Requirements
| Software Included | ArubaOS-CX |
|---|
Dimensions & Weight
| Width | 44.25 cm |
|---|---|
| Depth | 55.88 cm |
| Height | 4.4 cm |
| Weight | 10.73 kg |
Manufacturer Warranty
| Service & Support | Limited warranty - lifetime |
|---|
Environmental Parameters
| Min Operating Temperature | 0 °C |
|---|---|
| Max Operating Temperature | 45 °C |
| Humidity Range Operating | 15 - 95% (non-condensing) |
| Min Storage Temperature | -40 °C |
| Max Storage Temperature | 70 °C |
| Humidity Range Storage | 15 - 95% (non-condensing) |
Product features
Modular Cloud-Native Architecture
The Aruba CX 8360 v2 Switch Series AOS-CX simplify the complexities of managing data center networks with automation options to match your IT organization's operating model. Proactively detect issues and speed troubleshooting with actionable insights provided by an analytics engine embedded in every switch. Always-on infrastructure designed for resiliency and upgrades with zero downtime. REST APIs and Python scripting provide fine-grained microservices architecture enabling full integration with other workflow systems and services. Continual state synchronization provides superior fault tolerance and high availability. Always-on infrastructure designed for resiliency and upgrades with zero downtime.Aruba Network Analytics Engine
The Aruba Network Analytics Engine (NAE) for advanced telemetry and automation. NAE is an industry-first monitoring and troubleshooting system, providing greatly improved network operations. NAE uniquely provides the ability to monitor and easily troubleshoot network health and congestion issues. Customers can use data from The Time Series Database (TSDB) to store configuration and operational state to write software modules to troubleshoot problems. This data may also be used to analyze trends, identify anomalies, and predict future capacity requirements.High Availability and Resiliency
All software processes in the Aruba CX 8360 v2 Switch Series run as microservices that communicate via the state database of the switch; there is no direct communication between microservices. Should a software process crash, the impact of that failure will be limited. The ability of ArubaOS-CX to maintain synchronous state across dual control planes allows a unique high availability solution called Aruba Virtual Switching Extension (VSX). Aruba VSX provides a robust, yet simple solution for high availability with a unique design for control plane synchronization and an architecture that is redundant in both hardware and software by deploying two chassis with an inter-switch link, maintaining its independent control.Software-Defined Automation
The Aruba CX 8360 v2 Switch Series is supported by Aruba Fabric Composer, a software-defined orchestration solution that simplifies and accelerates leaf-spine network provisioning and day-to-day operations across rack-scale compute and storage infrastructure. Orchestrate a discrete set of switches as a single networking fabric to simplify operations and troubleshooting. This infrastructure and application-aware solution also automates various configuration and lifecycle events.Key selling points
- The Aruba CX 8360 v2 Switch Series AOS-CX simplify the complexities of managing data center networks with automation options to match your IT organization’s operating model.
- The Aruba Network Analytics Engine (NAE) for advanced telemetry and automation. NAE is an industry-first monitoring and troubleshooting system, providing greatly improved network operations. NAE uniquely provides the ability to monitor and easily troubleshoot network health and congestion issues.
- All software processes in the Aruba CX 8360 v2 Switch Series run as microservices that communicate via the state database of the switch; there is no direct communication between microservices. Should a software process crash, the impact of that failure will be limited.
- The Aruba CX 8360 v2 Switch Series is supported by Aruba Fabric Composer, a software-defined orchestration solution that simplifies and accelerates leaf-spine network provisioning and day-to-day operations across rack-scale compute and storage infrastructure.
References
MPN: JL705C
Special Network Cables Products Recommended
Computer Service Options Products Recommended
SFP Transceivers Products Recommended
Optical Transceivers Products Recommended
Server Accessories Products Recommended
Network & Enterprise Management Products Recommended
What our Customers think about us!
Page generated at:
04/06/2026 06:28:21