HPE Networking Comware 2150 24p 10M/100M/1G 4p SFP+ 1G/10G
Switch | L3 | Managed | 24 x 10/100/1000Base-T + 4 x 1 Gigabit / 10 Gigabit SFP+ (uplink / stacking) | rack-mountable
More like this
In this category:
Main Specification
| Product Description | HPE Networking Comware 2150 24p 10M/100M/1G 4p SFP+ 1G/10G - switch - 24 ports - Managed - rack-mountable |
|---|---|
| Device Type | Switch - 24 ports - L3 - Managed - stackable |
| Enclosure Type | Rack-mountable 1U |
| Subtype | Gigabit Ethernet |
| Ports | 24 x 10/100/1000Base-T + 4 x 1 Gigabit / 10 Gigabit SFP+ (uplink / stacking) |
| Performance | Switching capacity: 128 Gbps Throughput: 95 Mpps Latency (1 Gbps): < 5 µs Latency (10 Gbps): < 3 µs |
| Capacity | Switched virtual interfaces (SVIs): 32 IPv4 routes: 1500 IPv4 host table (ARP): 1024 IPv6 routes: 512 IPv6 host table (ND): 512 IGMP groups: 500 MLD groups: 500 ACL entries (ingress/egress): 1024 VRF instances: 32 Packet buffer size: 1.5 MB |
| MAC Address Table Size | 16K entries |
| Jumbo Frame Support | 9000 bytes |
| Routing Protocol | RIP-2, policy-based routing (PBR) |
| Remote Management Protocol | CLI, SNMP 1, SNMP 2c, SNMP 3, RestAPI |
| Features | Fanless, QoS, IPv6 support, sFlow, IRF Technology, BFD, DLDP support, IPv4 and IPv6 dual stack, MVR, MLD, IGMP snooping, port mirroring, RRPP, Auto-MDI/MDIX support |
| Compliant Standards | IEEE 802.1ab (LLDP), IEEE 802.1ad, IEEE 802.1x, IEEE 802.1Q |
| Power | AC 90-264 V |
| Dimensions (WxDxH) | 44 cm x 16 cm x 4.4 cm |
| Weight | 2 kg |
| Localisation | English / United Kingdom |
| Manufacturer Warranty | Limited lifetime warranty |
General
| Device Type | Switch - 24 ports - L3 - Managed - stackable |
|---|---|
| Enclosure Type | Rack-mountable 1U |
| Subtype | Gigabit Ethernet |
| Ports | 24 x 10/100/1000Base-T + 4 x 1 Gigabit / 10 Gigabit SFP+ (uplink / stacking) |
| Performance | Switching capacity: 128 Gbps Throughput: 95 Mpps Latency (1 Gbps): < 5 µs Latency (10 Gbps): < 3 µs |
| Capacity | Switched virtual interfaces (SVIs): 32 IPv4 routes: 1500 IPv4 host table (ARP): 1024 IPv6 routes: 512 IPv6 host table (ND): 512 IGMP groups: 500 MLD groups: 500 ACL entries (ingress/egress): 1024 VRF instances: 32 Packet buffer size: 1.5 MB |
| MAC Address Table Size | 16K entries |
| Jumbo Frame Support | 9000 bytes |
| Max Units In A Stack | 9 |
| Routing Protocol | RIP-2, policy-based routing (PBR) |
| Remote Management Protocol | CLI, SNMP 1, SNMP 2c, SNMP 3, RestAPI |
| Authentication Method | RADIUS, HWTACACS |
| Features | Fanless, QoS, IPv6 support, sFlow, IRF Technology, BFD, DLDP support, IPv4 and IPv6 dual stack, MVR, MLD, IGMP snooping, port mirroring, RRPP, Auto-MDI/MDIX support |
| Compliant Standards | IEEE 802.1ab (LLDP), IEEE 802.1ad, IEEE 802.1x, IEEE 802.1Q |
| Processor | 1 x ARM: 1.2 GHz |
| RAM | 1 GB SDRAM |
| Flash Memory | 512 MB |
Expansion / Connectivity
| Interfaces | 24 x 10/100/1000Base-T RJ-45 4 x 1/10GBase-X SFP+ uplink/stacking 1 x console USB Type-C 1 x console RJ-45 1 x management RJ-45 out-of-band network management |
|---|
Power
| Power Device | Internal power supply |
|---|---|
| Voltage Required | AC 90-264 V |
| Power Consumption Operational | 16 watt |
| Power Consumption Stand by | 6 watt |
Miscellaneous
| Rack Mounting Kit | Included |
|---|---|
| Compliant Standards | UL 60950-1, EN 60825-1, EN 60825-2, IEC 60950-1, IEC 62368-1, CAN/CSA-C22.2 No. 60950-1, EN 62368-1/A11, FDA 21 CFR Subchapter J, RoHS, EMC 2004/108/EC, FCC CFR 47 Part 15 Class A, EN 61000-4-11:2004, ANSI C63.4-2009, EN 61000-3-3:2008, VCCI V-3/2012.04, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-4-3:2006, EN 61000-4-4:2012, EN 61000-4-5:2006, EN 61000-4-6:2009, CISPR 22:2008 (International) Class A, EN 55022:2010 Class A, EN 61000-4-29:2000, CISPR 24:2010, EN 300 386 V1.6.1, VCCI V-3/2013.04 Class A, EN55024, EN 300 386 |
| Localisation | English / United Kingdom |
Software / System Requirements
| Software Included | HPE Intelligent Management Center |
|---|
Dimensions & Weight
| Width | 44 cm |
|---|---|
| Depth | 16 cm |
| Height | 4.4 cm |
| Weight | 2 kg |
Manufacturer Warranty
| Service & Support | Limited warranty - lifetime |
|---|
Environmental Parameters
| Min Operating Temperature | -5 °C |
|---|---|
| Max Operating Temperature | 50 °C |
| Humidity Range Operating | 5 - 95% (non-condensing) |
| Min Storage Temperature | -40 °C |
| Max Storage Temperature | 70 °C |
| Humidity Range Storage | 5 - 95% (non-condensing) |
Product features
Advanced routing capabilities
The switch supports Layer 3 functionalities, including RIP-2 and policy-based routing, ensuring efficient data management across the network.Environmental resilience
With an operating temperature range of -5°C to 50°C and a humidity range of 5 - 95%, the switch is engineered to function effectively in various conditions.High performance specifications
Featuring a throughput of 95 Mpps and low latency figures of less than 5 µs at 1 Gbps and under 3 µs at 10 Gbps, this switch ensures rapid data transfer without delays.Management and monitoring options
Equipped with various remote management protocols including CLI, SNMP, and RestAPI, it offers ease of management and monitoring for network administrators.Comprehensive compliance standards
The switch adheres to multiple compliance standards to ensure safety and compatibility including UL 60950-1 and FCC CFR 47 Part 15 Class A.Key selling points
- 24 ports of 10/100/1000Base-T and 4 ports of SFP+ for flexible connectivity
- High switching capacity of 128 Gbps for optimal performance
- Fanless design minimizes noise and power consumption
- Supports IPv4 and IPv6 dual stack for enhanced scalability
- Stackable up to 9 units for tailored network growth
References
MPN: S6X50A#ACC
Optical Transceivers Products Recommended
Special Network Cables Products Recommended
SFP Transceivers Products Recommended
What our Customers think about us!
Page generated at:
14/10/2026 06:26:03