HPE Networking Comware 2050 24p 10/100/1000BT PoE+ 4p SFP 1G/2.5G 420W
Switch | Managed | 24 x 10/100/1000Base-T (PoE+) + 4 x 1/2.5GBase-T (PoE++) + 4 x 1/2.5GBase-X (uplink / stacking) | rack-mountable | PoE++ (420 W)
More like this
In this category:
Main Specification
| Product Description | HPE Networking Comware 2050 24p 10/100/1000BT PoE+ 4p SFP 1G/2.5G 420W - switch - 24 ports - Managed - rack-mountable |
|---|---|
| Device Type | Switch - 24 ports - Managed - stackable |
| Enclosure Type | Rack-mountable 1U |
| Subtype | Gigabit Ethernet / 2.5 Gigabit Ethernet |
| Ports | 24 x 10/100/1000Base-T (PoE+) + 4 x 1/2.5GBase-T (PoE++) + 4 x 1/2.5GBase-X (uplink / stacking) |
| Power Over Ethernet (PoE) | PoE++ |
| PoE Budget | 420 W |
| Performance | Forwarding capacity: 80 Gbps Throughput: 59.52 Mpps Latency (1 Gbps): < 5 µs Latency (10 Gbps): < 3 µs |
| Capacity | Switched virtual interfaces (SVIs) (dual stack): 16 IPv4 routes: 64 IPv4 host table (ARP): 512 IPv6 routes: 64 IPv6 host table (ND): 256 IGMP snooping groups: 62 MLD snooping groups: 62 ACL entries (ingress/egress): 512 Packet buffer size: 0.5 MB |
| MAC Address Table Size | 16K entries |
| Jumbo Frame Support | 9000 bytes |
| Remote Management Protocol | SNMP 3, CLI |
| Features | 2 fans, IPv6 support, sFlow, port mirroring, IGMP snooping, PIM snooping, MLD, MVR, IPv4 and IPv6 dual stack, IRF Technology, PoE Class 4, Advanced Quality of Service (QoS), 6 KV surge protection, Auto-MDI/MDIX support, DLDP support |
| Compliant Standards | IEEE 802.1ab (LLDP), IEEE 802.1ad, IEEE 802.1x, IEEE 802.1Q, IEEE 802.3at |
| Power | AC 90-290 V (50/60 Hz) |
| Dimensions (WxDxH) | 44 cm x 26 cm x 4.4 cm |
| Weight | 3.6 kg |
| Localisation | English / United Kingdom |
| Manufacturer Warranty | Limited lifetime warranty |
General
| Device Type | Switch - 24 ports - Managed - stackable |
|---|---|
| Enclosure Type | Rack-mountable 1U |
| Subtype | Gigabit Ethernet / 2.5 Gigabit Ethernet |
| Ports | 24 x 10/100/1000Base-T (PoE+) + 4 x 1/2.5GBase-T (PoE++) + 4 x 1/2.5GBase-X (uplink / stacking) |
| Power Over Ethernet (PoE) | PoE++ |
| PoE Budget | 420 W |
| Performance | Forwarding capacity: 80 Gbps Throughput: 59.52 Mpps Latency (1 Gbps): < 5 µs Latency (10 Gbps): < 3 µs |
| Capacity | Switched virtual interfaces (SVIs) (dual stack): 16 IPv4 routes: 64 IPv4 host table (ARP): 512 IPv6 routes: 64 IPv6 host table (ND): 256 IGMP snooping groups: 62 MLD snooping groups: 62 ACL entries (ingress/egress): 512 Packet buffer size: 0.5 MB |
| MAC Address Table Size | 16K entries |
| Jumbo Frame Support | 9000 bytes |
| Max Units In A Stack | 2 |
| Remote Management Protocol | SNMP 3, CLI |
| Encryption Algorithm | SSL, TLS |
| Authentication Method | RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
| Features | 2 fans, IPv6 support, sFlow, port mirroring, IGMP snooping, PIM snooping, MLD, MVR, IPv4 and IPv6 dual stack, IRF Technology, PoE Class 4, Advanced Quality of Service (QoS), 6 KV surge protection, Auto-MDI/MDIX support, DLDP support |
| Compliant Standards | IEEE 802.1ab (LLDP), IEEE 802.1ad, IEEE 802.1x, IEEE 802.1Q, IEEE 802.3at |
| Processor | 1 x ARM: 1.25 GHz |
| RAM | 1 GB SDRAM |
| Flash Memory | 256 MB |
Expansion / Connectivity
| Interfaces | 24 x 10/100/1000Base-T RJ-45 PoE+ 4 x 1/2.5GBase-T RJ-45 PoE++ 4 x 1/2.5GBase-X SFP uplink/stacking 1 x console RJ-45 1 x management out-of-band network management |
|---|
Power
| Power Device | Internal power supply |
|---|---|
| Voltage Required | AC 90-290 V (50/60 Hz) |
| Power Consumption Operational | 23 watt |
| Power Consumption Stand by | 14 watt |
Miscellaneous
| Rack Mounting Kit | Included |
|---|---|
| Compliant Standards | UL 60950-1, EN 60825-1, EN 60825-2, IEC 60950-1, IEC 62368-1, CAN/CSA-C22.2 No. 60950-1, EN 62368-1/A11, FDA 21 CFR Subchapter J, RoHS, EMC 2004/108/EC, FCC CFR 47 Part 15 Class A, EN 61000-4-11:2004, ANSI C63.4-2009, EN 61000-3-3:2008, VCCI V-3/2012.04, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-4-3:2006, EN 61000-4-4:2012, EN 61000-4-5:2006, EN 61000-4-6:2009, CISPR 22:2008 (International) Class A, EN 55022:2010 Class A, EN 61000-4-29:2000, CISPR 24:2010, EN 300 386 V1.6.1, VCCI V-3/2013.04 Class A, EN55024, EN 300 386 |
| Localisation | English / United Kingdom |
Software / System Requirements
| Software Included | HPE Intelligent Management Center |
|---|
Dimensions & Weight
| Width | 44 cm |
|---|---|
| Depth | 26 cm |
| Height | 4.4 cm |
| Weight | 3.6 kg |
Manufacturer Warranty
| Service & Support | Limited warranty - lifetime |
|---|
Environmental Parameters
| Min Operating Temperature | -5 °C |
|---|---|
| Max Operating Temperature | 45 °C |
| Humidity Range Operating | 5 - 95% (non-condensing) |
| Min Storage Temperature | -40 °C |
| Max Storage Temperature | 70 °C |
| Humidity Range Storage | 5 - 95% (non-condensing) |
Product features
High capacity networking
Supports 16 switched virtual interfaces and a maximum of 256 IPv4 and IPv6 routes, allowing extensive connectivity options for businesses.Flexible management
Utilizes SNMP 3 and CLI for streamlined network management, enabling administrators to efficiently monitor and control the network.Robust performance
Delivers a forwarding capacity of 80 Gbps and throughput of 59.52 Mpps, ensuring quick data transfer and minimal latency.Enhanced security features
Includes RADIUS, TACACS+, and Secure Shell v.2 (SSH2) authentication methods to protect network access and data.Environmental resilience
Operates effectively in various temperatures and humidity levels, making it suitable for diverse operational environments.Key selling points
- 24 Gigabit Ethernet ports with PoE+ and PoE++ support
- IPv4 and IPv6 dual stack for versatile networking
- Advanced Quality of Service (QoS) for optimized traffic management
- Built-in surge protection for enhanced reliability
- Remote management options for efficient network control
References
MPN: S6X72A#ACC
SFP Transceivers Products Recommended
What our Customers think about us!
Page generated at:
14/10/2026 06:26:03