HPE FlexFabric 12902E Switch Chassis

Switch | L3 | Managed | rack-mountable

MPN JH345A
Manufacturer HPE
QuickCode 1377026
Qty immediately available 0
Total stock 0
RRP: £76,539.00 inc VAT
£59,821.69 inc VAT
£49,851.41 ex VAT
Save
21%

This item is out of stock

We are an Authorised Silver Partner

All products come in brand new original packaging.

Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description HPE FlexFabric 12902E Switch Chassis - switch - Managed - rack-mountable
Device Type Switch - L3 - Managed
Enclosure Type Rack-mountable 3U
Performance Switching capacity: 11.5 Tbps Throughput: 7.2 Bpps
Routing Protocol OSPF, EGP, RIP, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, GRE, OSPFv3, PIM-SSM, Bidirectional PIM, MSDP, static IPv4 routing, static IPv6 routing, ECMP, policy-based routing (PBR), RIPng, MLDv2, MLD, BGP-4+, MPLS, Bidirectional Forwarding Detection (BFD), CIDR, BGP for IPv6, BGP+
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, SNMP, RMON 3, RMON 9, RMON, Telnet, SNMP 3, HTTP, TFTP, SSH, SSH-2
Features Flow control, NAT support, VPN support, ARP support, VLAN support, IGMP snooping, IPv6 support, LFS, STP support, RSTP support, VRRP support, MSTP support, tunnelling, DCBX support, IPSec VPN, DHCP snooping, ACL support, QoS, RADIUS support, PVST+, DLDP support, BFD, URPF, IPv4 support, LACP support, LLDP support, DHCP relay, LACP, Port Security, DCB, fan tray, DHCP client, MIB, NTP time synchronisation, FCoE forwarding, CoS, UDP/IP offloading, EVB, IRF technology, NQA, MSDP, MBGP, SNMP support, IP source guard
Compliant Standards IEEE 802.3, IEEE 802.3z, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1Qbb, IEEE 802.1Qaz
Power AC 120/230 V (50/60 Hz) - power supply not installed
Dimensions (WxDxH) 44 cm x 89.5 cm x 13.3 cm
Weight 24 kg
Manufacturer Warranty 1-year warranty

General

Device Type Switch - L3 - Managed
Enclosure Type Rack-mountable 3U
Performance Switching capacity: 11.5 Tbps Throughput: 7.2 Bpps
Routing Protocol OSPF, EGP, RIP, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, GRE, OSPFv3, PIM-SSM, Bidirectional PIM, MSDP, static IPv4 routing, static IPv6 routing, ECMP, policy-based routing (PBR), RIPng, MLDv2, MLD, BGP-4+, MPLS, Bidirectional Forwarding Detection (BFD), CIDR, BGP for IPv6, BGP+
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, SNMP, RMON 3, RMON 9, RMON, Telnet, SNMP 3, HTTP, TFTP, SSH, SSH-2
Encryption Algorithm MD5, AES, IKE, TLS
Authentication Method Secure Shell (SSH), RADIUS, PAP, CHAP, TACACS+, Secure Shell v.2 (SSH2), Extensible Authentication Protocol (EAP)
Features Flow control, NAT support, VPN support, ARP support, VLAN support, IGMP snooping, IPv6 support, LFS, STP support, RSTP support, VRRP support, MSTP support, tunnelling, DCBX support, IPSec VPN, DHCP snooping, ACL support, QoS, RADIUS support, PVST+, DLDP support, BFD, URPF, IPv4 support, LACP support, LLDP support, DHCP relay, LACP, Port Security, DCB, fan tray, DHCP client, MIB, NTP time synchronisation, FCoE forwarding, CoS, UDP/IP offloading, EVB, IRF technology, NQA, MSDP, MBGP, SNMP support, IP source guard
Compliant Standards IEEE 802.3, IEEE 802.3z, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1Qbb, IEEE 802.1Qaz
Processor 1 x MIPS MIPS64: 1.2 GHz
RAM 8 GB DDR3 SDRAM
Flash Memory 1 GB

Expansion / Connectivity

Expansion Slots 2 (total) / 2 (free) x Expansion Slot 2 (total) / 2 (free) x MPU
Installed Modules Qty (Max) 0 (installed) / 4 (max)

Power

Power Device Internal power supply (not installed)
Max Supported Qty 4
Voltage Required AC 120/230 V (50/60 Hz)

Miscellaneous

Included Accessories Rack mount kit
Compliant Standards ETSI, CISPR 22 Class A, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, EN 61000-3-3, EN55024, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, EN 6100-3-2, AS/NZS, VCCI Class A, EN 50581, ETS 300 386, FDA 21CFR1040.10, EN 55022 Class A, FCC CFR47 Part 15 A, EN 300 386, CAN/CSA-C22.2 No. 60950-1

Software / System Requirements

Software Included Command Line Interface (CLI), HP Intelligent Management Center

Dimensions & Weight

Width 44 cm
Depth 89.5 cm
Height 13.3 cm
Weight 24 kg

Manufacturer Warranty

Service & Support Limited warranty - advance parts replacement - 1 year Limited warranty - phone consulting - 1 year Limited warranty - delivery - 10 days

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 5 - 95% (non-condensing)
Min Storage Temperature -40 °C
Max Storage Temperature 70 °C
Humidity Range Storage 5 - 95% (non-condensing)
Product features

Modern, Scalable and Distributed Architecture

The HPE Networking Comware Switch Series 12900E provides non-blocking, lossless Clos architecture with VOQs and large buffers with the flexibility and scalability for future growth. Distributed architecture with separation of data and control planes delivers enhanced fault tolerance and facilitates continuous operation and zero service disruption during planned or unplanned control-plane events. To meet the demands of next-generation networks, a new generation of OS-Comware v9 has been introduced that provides rich new features built on a modular and open architecture, supports containerized deployment and can run third-party software applications. In-Service Software Upgrade (ISSU) provides an upgrade of the entire chassis, or an individual task or process, with zero packet loss. It provides 2x scalability with H2 modules at the same price per port of HB modules.

High-Performance Switch Series with Broad Interface Options

The HPE Networking Comware Switch Series 12900E provides the Layer 2 and Layer 3 fabrics which are flexible, resilient, and scalable with VXLAN support and sub-second convergence times. High-density 1GbE, 10GbE, 40GbE,100GbE and 400GbE interface connectivity with up to 16 interface module slots scales up to 768 1GbE/10GbE/40GbE ports, 576 100GbE ports and 192 400GbE ports. It delivers up to 184 Tbps (bi-directional) switching capacity and 92.1 Bpps throughput with nonblocking wirespeed performance and up to six fabric modules for a distributed scalable fabric architecture.

Optimized for the Next-Generation Data Center

The HPE Networking Comware Switch Series 12900E provides the Layer 2 fabrics which are flexible, resilient, and scalable with VXLAN, TRILL and/or HPE Intelligent Resilient Fabric (IRF). Type X modules that offer automation capabilities with HPE Intelligent Management Center (IMC) Orchestrator and Analyzer, streaming telemetry support with Precision Timing Protocol (PTP) and up to 16K multicast group support. Enhanced HPE Multitenant Device Context (MDC) for multi-tenancy gives the ability to virtualize a physical switch into multiple logical device. Network and storage convergence with support for Fibre Channel over Ethernet (FCoE) and Data Center Bridging (DCB) protocols includes IEEE 802.1Qaz Data Center Bridging Exchange (DCBX), Enhanced Transmission Selection (ETS), and IEEE 802.1Qbb Priority Flow Control (PFC).

Enterprise-Class Availability and Resiliency with Broad Layer 2 and Layers 3 Feature Set

The Intelligent Resilient Fabric (IRF) creates virtual resilient switching fabrics where two HPE Networking Comware Switch Series 12900E perform as a single Layer 2 switch and Layer 3 router that can be attached using standard LACP for automatic load balancing and high availability. This switch series offers hot-swappable modules and redundant load-sharing fabrics, management, power and high-speed fan assemblies which provides you with optimum network performance and availability while simplifying your network operations. Comprehensive switching, routing and service provider feature set with full IPv4/IPv6, ACLs, QoS, MPLS/VPLS and multicast capabilities is offered.
Key selling points
  • The HPE Networking Comware Switch Series 12900E provides non-blocking, lossless Clos architecture with VOQs and large buffers with the flexibility and scalability for future growth.
  • The HPE Networking Comware Switch Series 12900E provides the Layer 2 and Layer 3 fabrics which are flexible, resilient, and scalable with VXLAN support and sub-second convergence times.
  • The HPE Networking Comware Switch Series 12900E provides the Layer 2 fabrics which are flexible, resilient, and scalable with VXLAN, TRILL and/or HPE Intelligent Resilient Fabric (IRF).
  • The Intelligent Resilient Fabric (IRF) creates virtual resilient switching fabrics where two HPE Networking Comware Switch Series 12900E perform as a single Layer 2 switch and Layer 3 router that can be attached using standard LACP for automatic load balancing and high availability.
References

MPN: JH345A

What our Customers think about us!

What our Customers think about us!

Page generated at: 04/06/2026 05:09:19