Arista 7280SE-64

Switch | L3 | Managed | 48 x 1 Gigabit / 10 Gigabit SFP+ + 4 x 10/40 Gigabit QSFP+ | back to front airflow | rack-mountable

MPN JH568A
Manufacturer Arista
QuickCode 1309518
Qty immediately available 0
Total stock 0
RRP: £28,450.99 inc VAT
£22,206.02 inc VAT
£18,505.02 ex VAT
Save
21%

This item is out of stock

Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description Arista 7280SE-64 - switch - 48 ports - Managed - rack-mountable
Device Type Switch - 48 ports - L3 - Managed
Enclosure Type Back to front airflow rack-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 48 x 1 Gigabit / 10 Gigabit SFP+ + 4 x 10/40 Gigabit QSFP+
Performance Throughput: 1.28 Tbps Switching capacity: 900 Mpps Latency: 3.8 µs
Capacity Virtual interfaces (VLANs): 4096 ARP entries: 96000 Longest prefix match (LPM) entries (IPv4): 64000 Longest prefix match (LPM) entries (IPv6): 12000 ACL entries: 36000
MAC Address Table Size 256K entries
Jumbo Frame Support 9216 bytes
Routing Protocol OSPF, IS-IS, RIP-2, BGP, IGMPv2, VRRP, PIM-SM, static IP routing, IGMPv3, OSPFv3, PIM-SSM, Multiprotocol BGP, MSDP, ECMP, policy-based routing (PBR), Bidirectional Forwarding Detection (BFD)
Remote Management Protocol SNMP 1, SNMP 2, RMON 2, RMON, Telnet, SNMP 3, SSH-2, CLI
Features Flow control, Layer 3 switching, ARP support, trunking, VLAN support, IGMP snooping, Syslog support, port mirroring, WRR queuing, MAC address filtering, IPv6 support, sFlow, STP support, RSTP support, MSTP support, ACL support, QoS, RADIUS support, Jumbo Frames support, Rapid PVST+, LACP support, DHCP relay, LACP, MIB, hot swappable 4 fans, CoS, tagged VLAN, DSCP support, Storm Control
Compliant Standards IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1Qaz
Power AC 120/230 V (50/60 Hz)
Power Redundancy Yes
Dimensions (WxDxH) 44.5 cm x 52.3 cm x 4.4 cm
Weight 10 kg

General

Device Type Switch - 48 ports - L3 - Managed
Enclosure Type Back to front airflow rack-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 48 x 1 Gigabit / 10 Gigabit SFP+ + 4 x 10/40 Gigabit QSFP+
Performance Throughput: 1.28 Tbps Switching capacity: 900 Mpps Latency: 3.8 µs
Capacity Virtual interfaces (VLANs): 4096 ARP entries: 96000 Longest prefix match (LPM) entries (IPv4): 64000 Longest prefix match (LPM) entries (IPv6): 12000 ACL entries: 36000
MAC Address Table Size 256K entries
Jumbo Frame Support 9216 bytes
Routing Protocol OSPF, IS-IS, RIP-2, BGP, IGMPv2, VRRP, PIM-SM, static IP routing, IGMPv3, OSPFv3, PIM-SSM, Multiprotocol BGP, MSDP, ECMP, policy-based routing (PBR), Bidirectional Forwarding Detection (BFD)
Remote Management Protocol SNMP 1, SNMP 2, RMON 2, RMON, Telnet, SNMP 3, SSH-2, CLI
Authentication Method RADIUS, TACACS+
Features Flow control, Layer 3 switching, ARP support, trunking, VLAN support, IGMP snooping, Syslog support, port mirroring, WRR queuing, MAC address filtering, IPv6 support, sFlow, STP support, RSTP support, MSTP support, ACL support, QoS, RADIUS support, Jumbo Frames support, Rapid PVST+, LACP support, DHCP relay, LACP, MIB, hot swappable 4 fans, CoS, tagged VLAN, DSCP support, Storm Control
Compliant Standards IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1Qaz
RAM 4 GB
Flash Memory 4 GB
Built-in Devices 120 GB SSD

Expansion / Connectivity

Interfaces 1 x management (Gigabit LAN) RJ-45 1 x management (RS-232) RJ-45 48 x Gigabit / 10Gbit LAN SFP+ 4 x 10Gbit/40Gbit LAN QSFP+ 1 x USB

Power

Power Device Internal power supply - hot-plug
Installed Qty 2
Max Supported Qty 2
Power Redundancy Yes
Power Redundancy Scheme 1+1
Power Provided 500 watt
Voltage Required AC 120/230 V (50/60 Hz)
Power Consumption Operational 381 watt
Features Front-to-rear airflow

Miscellaneous

Compliant Standards C-Tick, BSMI, EN55022, EN55024, CB, CCC, EMC, FCC, UL 60950-1, IEC 60950-1, EN 60950-1, WEEE, NRTL, EAC, MSIP, EN 61000-3-11:2000, EN 61000-3-12:2011, Interseroh, CSA 22.2 No. 60950-1, EN61000-3-3, EN61000-3-2

Dimensions & Weight

Width 44.5 cm
Depth 52.3 cm
Height 4.4 cm
Weight 10 kg

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 5 - 95%
Min Storage Temperature -25 °C
Max Storage Temperature 70 °C
Product features

Flexibility for Scale Out Network Designs

The Arista 7280E 10/40/100GbE High Performance Switch Series has purpose 10/40/100GbE fixed configuration systems built for the highest performance environments, where wire speed L2 and L3 forwarding are combined with advanced features for network virtualization. Capabilities address the requirements for modern networking and rich multi-media content delivery requiring a lossless forwarding solution. All models deliver rich L2 and L3 features with wire speed performance up to 1.44 Tbps. Offers a virtual output queue architecture combinded with an ultra-deep 9 GB of packet buffers that reduces head of line blocking and allows for lossless forwarding under sustained congestion and the most application loads. Gives you advanced features for network monitoring and precision timing to deliver deterministic network performance for mission critical data centers, cloud computing, enterprise and HPEC environments.

Supoported by Arista EOS

The Arista EOS delivers advanced features for HPEC, big data, content delivery, cloud and virtualized environments. Simplifies network administration, via a modular switch operating system with a unique state sharing architecture. Offers advanced monitoring and automation capabilities such as Zero Touch Provisioning, VMTracer and Linux based tools that can be run natively on the switch with the powerful quad-core x86 CPU subsystem.
Key selling points
  • The Arista 7280E 10/40/100GbE High Performance Switch Series has purpose 10/40/100GbE fixed configuration systems built for the highest performance environments, where wire speed L2 and L3 forwarding are combined with advanced features for network virtualization.
  • The Arista EOS delivers advanced features for HPEC, big data, content delivery, cloud and virtualized environments.
References

MPN: JH568A

What our Customers think about us!

What our Customers think about us!

Page generated at: 04/06/2026 01:09:27