Arista 7050SX-64

Switch | L3 | Managed | 48 x 1 Gigabit / 10 Gigabit SFP+ + 4 x 40 Gigabit QSFP+ | back to front airflow | rack-mountable

MPN JH582A
Manufacturer Arista
QuickCode 1308261
Qty immediately available 0
Total stock 0
RRP: £20,320.99 inc VAT
£15,868.10 inc VAT
£13,223.42 ex VAT
Save
21%

This item is out of stock

Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description Arista 7050SX-64 - switch - 48 ports - Managed - rack-mountable
Device Type Switch - 48 ports - L3 - Managed
Enclosure Type Back to front airflow rack-mountable 1U
Subtype 40 Gigabit Ethernet
Ports 48 x 1 Gigabit / 10 Gigabit SFP+ + 4 x 40 Gigabit QSFP+
Performance Throughput: 1.28 Tbps Switching capacity: 950 Mpps Latency: 550 ns
Capacity Virtual interfaces (VLANs): 4096 IGMP groups: 288000 ACL entries: 4000 IPv4 routes (Multicast): 16000 IPv4 routes (Unicast): 16000 IPv6 routes (Unicast): 8000 IPv6 routes (Multicast): 4000 IPv4 hosts: 16000 Host table entries (IPv6): 16000
MAC Address Table Size 32K entries
Jumbo Frame Support 9216 bytes
Routing Protocol OSPF, IS-IS, RIP-2, BGP, IGMPv2, IGMP, VRRP, PIM-SM, IGMPv3, OSPFv3, PIM-SSM, Multiprotocol BGP, ECMP, policy-based routing (PBR)
Remote Management Protocol SNMP 1, SNMP 2, RMON 2, RMON, Telnet, SNMP 3, SSH-2, CLI
Features Flow control, Layer 3 switching, Layer 2 switching, NAT support, load balancing, VLAN support, IGMP snooping, Syslog support, port mirroring, MAC address filtering, IPv6 support, sFlow, STP support, DHCP snooping, ACL support, QoS, Jumbo Frames support, IPv4 support, DHCP relay, LACP, Zero Touch Auto Provisioning, 12MB packet buffer, hot swappable 4 fans
Compliant Standards IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1Qaz
Power AC 120/230 V (50/60 Hz)
Power Redundancy Yes
Dimensions (WxDxH) 48.3 cm x 20.6 cm x 4.4 cm
Weight 8.6 kg
Manufacturer Warranty 1-year warranty

General

Device Type Switch - 48 ports - L3 - Managed
Enclosure Type Back to front airflow rack-mountable 1U
Subtype 40 Gigabit Ethernet
Ports 48 x 1 Gigabit / 10 Gigabit SFP+ + 4 x 40 Gigabit QSFP+
Performance Throughput: 1.28 Tbps Switching capacity: 950 Mpps Latency: 550 ns
Capacity Virtual interfaces (VLANs): 4096 IGMP groups: 288000 ACL entries: 4000 IPv4 routes (Multicast): 16000 IPv4 routes (Unicast): 16000 IPv6 routes (Unicast): 8000 IPv6 routes (Multicast): 4000 IPv4 hosts: 16000 Host table entries (IPv6): 16000
MAC Address Table Size 32K entries
Jumbo Frame Support 9216 bytes
Routing Protocol OSPF, IS-IS, RIP-2, BGP, IGMPv2, IGMP, VRRP, PIM-SM, IGMPv3, OSPFv3, PIM-SSM, Multiprotocol BGP, ECMP, policy-based routing (PBR)
Remote Management Protocol SNMP 1, SNMP 2, RMON 2, RMON, Telnet, SNMP 3, SSH-2, CLI
Authentication Method RADIUS, TACACS+
Features Flow control, Layer 3 switching, Layer 2 switching, NAT support, load balancing, VLAN support, IGMP snooping, Syslog support, port mirroring, MAC address filtering, IPv6 support, sFlow, STP support, DHCP snooping, ACL support, QoS, Jumbo Frames support, IPv4 support, DHCP relay, LACP, Zero Touch Auto Provisioning, 12MB packet buffer, hot swappable 4 fans
Compliant Standards IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1Qaz
RAM 4 GB
Flash Memory 4 GB
Status Indicators Power, system, fan

Expansion / Connectivity

Interfaces 1 x management (Gigabit LAN) RJ-45 1 x management (RS-232) RJ-45 48 x 10Gbit LAN SFP+ 4 x 40Gbit LAN QSFP+ 1 x USB

Power

Power Device Internal power supply - hot-plug
Installed Qty 2
Max Supported Qty 2
Power Redundancy Yes
Power Redundancy Scheme 1+1
Power Provided 500 watt
Voltage Required AC 120/230 V (50/60 Hz)
Power Consumption Operational 140 watt

Miscellaneous

Compliant Standards TUV, EN 60950, VCCI Class A ITE, IEC 60950, UL 60950, CSA 22.2 No. 60950, ICES-003 Class A, FCC Part 15 A, RoHS2

Dimensions & Weight

Width 48.3 cm
Depth 20.6 cm
Height 4.4 cm
Weight 8.6 kg

Manufacturer Warranty

Service & Support Limited warranty - parts and labour - 1 year - response time: 10 business days

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 5 - 95%
Min Storage Temperature -25 °C
Max Storage Temperature 70 °C
Product features

Scaling Data Center Performance

Arista 7050SX 10/40 Data Center Switch Series delivers line rate switching at Layer 2 and Layer 3 to enable dramatically faster and simpler network designs for data centers that dramatically lowers the network capital and operational expenses. Featuring a choice of 1RU and 2RU models, the Arista 7050SX Series deliver high-density 1/10GbE SFP+ based ports and 10/40GbE ports using QSFP+ for flexible configurations supporting migration from 1/10GbE to 10/40GbE networks. The flexibility of the Layer 2 and Layer 3 multi-path design options combined with support for open standards provides increased flexibility, scalability and network wide virtualization.

Scale Out Network Designs

In cut-through mode, the Arista 7050SX 10/40 Data Center Switch Series forward packets with a latency of 550 nanoseconds to 650 nanoseconds. Upon congestion, the packets are buffered in shared packet memory that has a total size of 12 MB. The Arista 7050X delivers a suite of advanced traffic control and monitoring features to improve the agility of modern high-performance environments, with solutions for data monitoring and virtualization.

Arista Extensible Operating System (EOS)

Arista EOS is a modular switch operating system with a unique state sharing architecture that cleanly separates switch state from protocol processing and application logic. Built on top of a standard Linux kernel, all EOS processes run in their own protected memory space and exchange state through an in-memory database. Arista EOS automates complex IT workflows and simplifies network operations while reducing downtime. It's rich automation capabilities not only reduce the human error element in network operations but also enables IT operators to make the network work the way they want.
Key selling points
  • Arista 7050SX 10/40 Data Center Switch Series delivers line rate switching at Layer 2 and Layer 3 to enable dramatically faster and simpler network designs for data centers that dramatically lowers the network capital and operational expenses.
  • In cut-through mode, the Arista 7050SX 10/40 Data Center Switch Series forward packets with a latency of 550 nanoseconds to 650 nanoseconds.
  • Arista EOS is a modular switch operating system with a unique state sharing architecture that cleanly separates switch state from protocol processing and application logic.
References

MPN: JH582A

What our Customers think about us!

What our Customers think about us!

Page generated at: 04/06/2026 03:56:07