Arista 7050SX-128

Switch | L3 | Managed | 96 x 10 Gigabit SFP+ + 8 x 40 Gigabit QSFP+ | front to back airflow | rack-mountable

MPN JH781A
Manufacturer Arista
QuickCode 1359777
Qty immediately available 0
Total stock 0
RRP: £32,515.99 inc VAT
£25,375.00 inc VAT
£21,145.83 ex VAT
Save
21%

This item is out of stock

Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description Arista 7050SX-128 - switch - 96 ports - Managed - rack-mountable
Device Type Switch - 96 ports - L3 - Managed
Enclosure Type Front to back airflow rack-mountable 2U
Subtype 10 Gigabit Ethernet
Ports 96 x 10 Gigabit SFP+ + 8 x 40 Gigabit QSFP+
Performance Throughput: 2.56 Tbps Latency: 550 ns Packet filter throughput: 1440 Mpps
Capacity IPv4 routes (Unicast): 16000 IPv4 hosts: 16000 IPv6 routes (Unicast): 8000 Virtual interfaces (VLANs): 4096 IPv4 routes (Multicast): 16000 IPv6 routes (Multicast): 4000 IPv6 hosts: 16000
MAC Address Table Size 288K entries
Jumbo Frame Support 9216 bytes
Routing Protocol OSPF, IS-IS, RIP-2, BGP, IGMPv2, VRRP, PIM-SM, IGMPv3, OSPFv3, PIM-SSM, Multiprotocol BGP, ECMP
Remote Management Protocol SNMP 1, SNMP 2, RMON 2, RMON, Telnet, SNMP 3, SSH-2, CLI
Features Flow control, Layer 3 switching, Layer 2 switching, NAT support, load balancing, VLAN support, IGMP snooping, Syslog support, port mirroring, MAC address filtering, IPv6 support, sFlow, STP support, DHCP snooping, ACL support, QoS, Jumbo Frames support, IPv4 support, DHCP relay, LACP, Zero Touch Auto Provisioning, 12MB packet buffer, reverse airflow support, CPP, MLAG, LANZ, AEM suite, CloudVision, Blue Beacon LED
Compliant Standards IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1Qaz
Power AC 120/230 V (50/60 Hz)
Power Redundancy Yes
Dimensions (WxDxH) 48.3 cm x 45.9 cm x 8.8 cm
Weight 15.1 kg
Manufacturer Warranty 1-year warranty

General

Device Type Switch - 96 ports - L3 - Managed
Enclosure Type Front to back airflow rack-mountable 2U
Subtype 10 Gigabit Ethernet
Ports 96 x 10 Gigabit SFP+ + 8 x 40 Gigabit QSFP+
Performance Throughput: 2.56 Tbps Latency: 550 ns Packet filter throughput: 1440 Mpps
Capacity IPv4 routes (Unicast): 16000 IPv4 hosts: 16000 IPv6 routes (Unicast): 8000 Virtual interfaces (VLANs): 4096 IPv4 routes (Multicast): 16000 IPv6 routes (Multicast): 4000 IPv6 hosts: 16000
MAC Address Table Size 288K entries
Jumbo Frame Support 9216 bytes
Routing Protocol OSPF, IS-IS, RIP-2, BGP, IGMPv2, VRRP, PIM-SM, IGMPv3, OSPFv3, PIM-SSM, Multiprotocol BGP, ECMP
Remote Management Protocol SNMP 1, SNMP 2, RMON 2, RMON, Telnet, SNMP 3, SSH-2, CLI
Authentication Method RADIUS, TACACS+
Features Flow control, Layer 3 switching, Layer 2 switching, NAT support, load balancing, VLAN support, IGMP snooping, Syslog support, port mirroring, MAC address filtering, IPv6 support, sFlow, STP support, DHCP snooping, ACL support, QoS, Jumbo Frames support, IPv4 support, DHCP relay, LACP, Zero Touch Auto Provisioning, 12MB packet buffer, reverse airflow support, CPP, MLAG, LANZ, AEM suite, CloudVision, Blue Beacon LED
Compliant Standards IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1Qaz
RAM 8 GB (installed) / 8 GB (max)
Flash Memory 4 GB
Status Indicators Port status, port duplex mode

Expansion / Connectivity

Interfaces 96 x 10Gbit LAN SFP+ 8 x 40Gbit LAN QSFP+ 2 x LAN RJ-45 management 1 x serial (RS-232) management 1 x USB Type A

Power

Power Device Internal power supply - hot-plug
Installed Qty 2
Max Supported Qty 2
Power Redundancy Yes
Power Redundancy Scheme 1+1
Power Provided 500 watt
Voltage Required AC 120/230 V (50/60 Hz)
Power Consumption Operational 235 watt
Features Front-to-rear airflow

Miscellaneous

Compliant Standards UL, TUV, VCCI, C-Tick, BSMI, EN 61000-3-2, EN55022, EN 61000-3-3, EN55024, CB, CCC, FCC, IEC 60950-1, EN 60950-1, WEEE, Directive 2004/108/EC, NRTL, Directive 2006/95/EC, EAC, MSIP, RoHS 2011/65/EU, CSA 22.2 No. 60950-1, EN 300386

Dimensions & Weight

Width 48.3 cm
Depth 45.9 cm
Height 8.8 cm
Weight 15.1 kg

Manufacturer Warranty

Service & Support Limited warranty - advance parts replacement - 1 year - response time: 10 business days

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 5 - 95%
Min Storage Temperature -25 °C
Max Storage Temperature 70 °C
Product features

Scaling Data Center Performance

Arista 7050SX 10/40 Data Center Switch Series delivers line rate switching at Layer 2 and Layer 3 to enable dramatically faster and simpler network designs for data centers that dramatically lowers the network capital and operational expenses. Featuring a choice of 1RU and 2RU models, the Arista 7050SX Series deliver high-density 1/10GbE SFP+ based ports and 10/40GbE ports using QSFP+ for flexible configurations supporting migration from 1/10GbE to 10/40GbE networks. The flexibility of the Layer 2 and Layer 3 multi-path design options combined with support for open standards provides increased flexibility, scalability and network wide virtualization.

Scale Out Network Designs

In cut-through mode, the Arista 7050SX 10/40 Data Center Switch Series forward packets with a latency of 550 nanoseconds to 650 nanoseconds. Upon congestion, the packets are buffered in shared packet memory that has a total size of 12 MB. The Arista 7050X delivers a suite of advanced traffic control and monitoring features to improve the agility of modern high-performance environments, with solutions for data monitoring and virtualization.

Arista Extensible Operating System (EOS)

Arista EOS is a modular switch operating system with a unique state sharing architecture that cleanly separates switch state from protocol processing and application logic. Built on top of a standard Linux kernel, all EOS processes run in their own protected memory space and exchange state through an in-memory database. Arista EOS automates complex IT workflows and simplifies network operations while reducing downtime. It's rich automation capabilities not only reduce the human error element in network operations but also enables IT operators to make the network work the way they want.
Key selling points
  • Arista 7050SX 10/40 Data Center Switch Series delivers line rate switching at Layer 2 and Layer 3 to enable dramatically faster and simpler network designs for data centers that dramatically lowers the network capital and operational expenses.
  • In cut-through mode, the Arista 7050SX 10/40 Data Center Switch Series forward packets with a latency of 550 nanoseconds to 650 nanoseconds.
  • Arista EOS is a modular switch operating system with a unique state sharing architecture that cleanly separates switch state from protocol processing and application logic.
References

MPN: JH781A

What our Customers think about us!

What our Customers think about us!

Page generated at: 04/06/2026 01:24:03