HPE FlexFabric 5710 48SFP+ 6QS+/2QS28

Switch | L3 | Managed | 48 x 1 Gigabit / 10 Gigabit SFP+ | rack-mountable

MPN JL585A
Manufacturer HPE
QuickCode 1519180
Qty immediately available 0
Total stock 0
RRP: £19,701.00 inc VAT
£14,239.33 inc VAT
£11,866.11 ex VAT
Save
27%

This item is out of stock

We are an Authorised Silver Partner

All products come in brand new original packaging.

Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description HPE FlexFabric 5710 48SFP+ 6QS+/2QS28 - switch - 48 ports - Managed - rack-mountable
Device Type Switch - 48 ports - L3 - Managed - stackable
Enclosure Type Rack-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 48 x 1 Gigabit / 10 Gigabit SFP+
Performance Throughput: 1071 Mpps Routing/switching capacity: 1440 Gbps Latency (10 Gbps): 1.5 µs
Capacity IPv4 routing table entries: 16000 IPv6 routing table entries: 8000 Virtual interfaces (VLANs): 4094 ARP entries: 68000 Static ARP entries: 1000
MAC Address Table Size 208000 entries
Jumbo Frame Support Yes
Routing Protocol OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, IGMPv3, OSPFv3, static IPv4 routing, static IPv6 routing, ECMP, RIPng, MPLS, Bidirectional Forwarding Detection (BFD)
Remote Management Protocol SNMP 1, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, SSH-2, CLI
Features Flow control, DHCP support, BOOTP support, ARP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, WRR queuing, IPv6 support, SNTP support, WFQ, WRED, sFlow, PIM snooping, STP support, RSTP support, MSTP support, tunnelling, DCBX support, priority-based flow control, DHCP snooping, ACL support, QoS, Jumbo Frames support, MLD snooping, DLDP support, ECMP, IPv4 support, LLDP support, DHCP relay, Port Security, DCB, role based access control, MIB, NTP time synchronisation, 12MB packet buffer, FCoE forwarding, CoS, SP, IRF technology, DSCP support, FCoE support, ToR, 4 fan tray slots
Compliant Standards IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1Qbb, IEEE 802.3ag
Power Redundancy Optional
Dimensions (WxDxH) 44 cm x 40 cm x 4.4 cm
Weight 8.61 kg
System Requirements Comware v7

General

Device Type Switch - 48 ports - L3 - Managed - stackable
Enclosure Type Rack-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 48 x 1 Gigabit / 10 Gigabit SFP+
Performance Throughput: 1071 Mpps Routing/switching capacity: 1440 Gbps Latency (10 Gbps): 1.5 µs
Capacity IPv4 routing table entries: 16000 IPv6 routing table entries: 8000 Virtual interfaces (VLANs): 4094 ARP entries: 68000 Static ARP entries: 1000
MAC Address Table Size 208000 entries
Jumbo Frame Support Yes
Routing Protocol OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, IGMPv3, OSPFv3, static IPv4 routing, static IPv6 routing, ECMP, RIPng, MPLS, Bidirectional Forwarding Detection (BFD)
Remote Management Protocol SNMP 1, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, SSH-2, CLI
Authentication Method Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2)
Features Flow control, DHCP support, BOOTP support, ARP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, WRR queuing, IPv6 support, SNTP support, WFQ, WRED, sFlow, PIM snooping, STP support, RSTP support, MSTP support, tunnelling, DCBX support, priority-based flow control, DHCP snooping, ACL support, QoS, Jumbo Frames support, MLD snooping, DLDP support, ECMP, IPv4 support, LLDP support, DHCP relay, Port Security, DCB, role based access control, MIB, NTP time synchronisation, 12MB packet buffer, FCoE forwarding, CoS, SP, IRF technology, DSCP support, FCoE support, ToR, 4 fan tray slots
Compliant Standards IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1Qbb, IEEE 802.3ag
RAM 4 GB SDRAM
Flash Memory 1 GB

Expansion / Connectivity

Interfaces 48 x Gigabit / 10Gbit LAN SFP+ 1 x 10/100/1000 Base-T management 1 x SFP management 1 x console (mini-USB) 1 x serial (console) RJ-45

Power

Power Device Internal power supply (not installed) - hot-plug
Max Supported Qty 2
Power Redundancy Optional
Power Redundancy Scheme 1+1 (with optional power supply)

Miscellaneous

Compliant Standards CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, AS/NZS 60950-1, ICES-003 Class A, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, ANATEL, VCCI Class A, CNS 13438, FCC CFR47 Part 15 A, KN32, KN35, AS/NZS CISPR 32 Class A, CNS 14336-1, TCVN 7189, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, ETSI EN 300 386

Software / System Requirements

OS Required Comware v7

Dimensions & Weight

Width 44 cm
Depth 40 cm
Height 4.4 cm
Weight 8.61 kg

Dimensions & Weight (Shipping)

Shipping Weight 8.65 kg

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 45 °C
Humidity Range Operating 10 - 90% (non-condensing)
Product features

Accelerate Application Performance

The HPE Networking Comware Switch Series 5710 are high density, low-latency switches, the perfect solution for bandwidth-intensive workloads. Two-tier network design delivers outstanding performance while protecting and extending existing Hewlett Packard Enterprise or 3rd party core network investments. Delivers up to 1,440 Gbps switching capacity for the most demanding applications. Low latency, under 1.5 µs 10GbE latency, provides improved throughput and fewer lost packets.

Simplify Administration and Support

The HPE Networking Comware Switch Series 5710 addresses small to mid-size organizations needing fixed high-performance and low-latency 1/10GbE top-of-rack data center switches for server connectivity. The HPE Networking Comware Switch Series 5710 includes the HPE Intelligent Resilient Framework which reduces administrative touchpoints by making multiple physical switches appear as a single virtual switch from a management perspective.

Reduce Cost and Simplify Operations While Accelerating Performance

HPE Networking Comware Switch Series 5710 reduces lock-in and having to replace the hardware. Unlike competitive products based on proprietary technology and closed designs, the 5710 Series switch top-of-rack products are based on industry standards and an open architecture. Removes hidden software expenses; the all-inclusive HPE Comware Switch license includes a complete set of advanced features. High-performance IP-attached switching allows the reduction of equipment and operations expense and complexity and delivers fast connectivity for HPE 3PAR, HPE Nimble, HPE SimpliVity or third-party storage arrays.

Hewlett Packard Enterprise Servers and Networking are Better Together

HPE Networking Comware Switch Series 5710 helps accelerate performance, simplify operations and contain costs. HPE ProLiant Servers, server networking options, HPE Comware top-of-rack switches, transceivers and cables are designed and tested to work better, together. Ability to migrate your compute, storage and networking infrastructure to support the most business critical applications - with confidence.
Key selling points
  • The HPE Networking Comware Switch Series 5710 are high density, low-latency switches, the perfect solution for bandwidth-intensive workloads.
  • The HPE Networking Comware Switch Series 5710 addresses small to mid-size organizations needing fixed high-performance and low-latency 1/10GbE top-of-rack data center switches for server connectivity
  • HPE Networking Comware Switch Series 5710 reduces lock-in and having to replace the hardware. Unlike competitive products based on proprietary technology and closed designs, the 5710 Series switch top-of-rack products are based on industry standards and an open architecture.
  • HPE Networking Comware Switch Series 5710 helps accelerate performance, simplify operations and contain costs.
References

MPN: JL585A

What our Customers think about us!

What our Customers think about us!

Page generated at: 04/06/2026 04:02:01