NETGEAR Smart MS510TXUP
Switch | L3 Lite | smart | 4 x 100/1000/2.5G (PoE++) + 4 x 100/1000/2.5/5/10G (PoE++) + 2 x 10 Gigabit SFP+ (uplink) | desktop, rack-mountable | PoE++ (295 W)
MPN
MS510TXUP-100EUS
Manufacturer
NETGEAR
QuickCode
1525558
Qty immediately available
30
Total stock
83
RRP: £795.67 inc VAT
£628.13
inc VAT
£523.44 ex
VAT
Save
21%
Quantity in Cart:
We are an Authorised
Platinum + Solutions Partner
All products come in brand new original packaging.
Delivery
Order by 4:30pm UK Time
(excluding weekends and Bank Holidays) for UK Mainland next working day delivery.
Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.
7 Working Days£0.00
Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98
3 working days (UK Mainland)
Next Working Day£7.97
Next working day (UK Mainland)
Main Specification
| Product Description | NETGEAR Smart MS510TXUP - switch - 8 ports - smart - rack-mountable |
|---|---|
| Device Type | Switch - 8 ports - L3 Lite - smart |
| Enclosure Type | Rack-mountable |
| Ports | 4 x 100/1000/2.5G (PoE++) + 4 x 100/1000/2.5/5/10G (PoE++) + 2 x 10 Gigabit SFP+ (uplink) |
| Power Over Ethernet (PoE) | PoE++ |
| PoE Budget | 295 W |
| Performance | Fabric throughput: 140 Gbps Forwarding rate (64‑byte packets): 14.8 Mpps 2.5 Gbps copper latency (64-byte packets): 5.903 µs 2.5 Gbps copper latency (1518-byte packets): 6.040 µs 2.5 Gbps copper latency (9216-byte packets): 6.079 µs 10 Gbps copper latency (64-byte packets): 2.420 µs 10 Gbps copper latency (1518-byte packets): 2.501 µs 10 Gbps copper latency (9216-byte packets): 2.499 µs 10 Gbps fibre latency (64-byte packets): 1.257 µs 10 Gbps fibre latency (1518-byte packets): 1.337 µs 10 Gbps fibre latency (9216-byte packets): 1.348 µs |
| Capacity | Packet buffer size: 2 MB ACL entries (ingress): 100 VLANs supported: 256 IGMP groups: 256 Priority queues: 8 DHCP snooping entries: 256 |
| MAC Address Table Size | 32000 entries |
| Jumbo Frame Support | 10KB |
| Routing Protocol | IGMPv2, IGMP, IGMPv3, MLDv2, MLD, MSTP, RSTP, STP |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS, IPv6, RSTP, TACACS+, RADIUS |
| Features | Flow control, IGMP snooping, Syslog support, DoS attack prevention, port mirroring, DiffServ support, store and forward, Broadcast Storm Control, full duplex mode, Multicast Storm Control, Unicast Storm Control, firmware upgradable, SNTP support, DHCP snooping, ACL support, LLDP support, LACP, DHCP client, GVRP, dual firmware images, loop prevention, SP, 802.1x authentication, cloud managed, VoIP support, DSCP support, 3 fans, cable test, BPDU, IGMP querier, DNS client, Voice VLAN, LLDP-MED, Guest VLAN, UDP, protected ports, ZTP, EEE, WRR, loopback detection, egress rate limiting, block unknown multicast, Advanced QoS, Unknown Storm Control, EAPOL |
| Compliant Standards | IEEE 802.1D, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3az, UPnP |
| Dimensions (WxDxH) | 33 cm x 20.6 cm x 4.3 cm |
| Weight | 2.51 kg |
| Localisation | Europe |
| Manufacturer Warranty | Limited lifetime warranty |
General
| Device Type | Switch - 8 ports - L3 Lite - smart |
|---|---|
| Enclosure Type | Desktop, rack-mountable |
| Ports | 4 x 100/1000/2.5G (PoE++) + 4 x 100/1000/2.5/5/10G (PoE++) + 2 x 10 Gigabit SFP+ (uplink) |
| Power Over Ethernet (PoE) | PoE++ |
| PoE Budget | 295 W |
| Performance | Fabric throughput: 140 Gbps Forwarding rate (64‑byte packets): 14.8 Mpps 2.5 Gbps copper latency (64-byte packets): 5.903 µs 2.5 Gbps copper latency (1518-byte packets): 6.040 µs 2.5 Gbps copper latency (9216-byte packets): 6.079 µs 10 Gbps copper latency (64-byte packets): 2.420 µs 10 Gbps copper latency (1518-byte packets): 2.501 µs 10 Gbps copper latency (9216-byte packets): 2.499 µs 10 Gbps fibre latency (64-byte packets): 1.257 µs 10 Gbps fibre latency (1518-byte packets): 1.337 µs 10 Gbps fibre latency (9216-byte packets): 1.348 µs |
| Capacity | Packet buffer size: 2 MB ACL entries (ingress): 100 VLANs supported: 256 IGMP groups: 256 Priority queues: 8 DHCP snooping entries: 256 |
| MAC Address Table Size | 32000 entries |
| Jumbo Frame Support | 10KB |
| Routing Protocol | IGMPv2, IGMP, IGMPv3, MLDv2, MLD, MSTP, RSTP, STP |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS, IPv6, RSTP, TACACS+, RADIUS |
| Encryption Algorithm | TLS 1.2 |
| Authentication Method | RADIUS, TACACS+, Extensible Authentication Protocol (EAP) |
| Features | Flow control, IGMP snooping, Syslog support, DoS attack prevention, port mirroring, DiffServ support, store and forward, Broadcast Storm Control, full duplex mode, Multicast Storm Control, Unicast Storm Control, firmware upgradable, SNTP support, DHCP snooping, ACL support, LLDP support, LACP, DHCP client, GVRP, dual firmware images, loop prevention, SP, 802.1x authentication, cloud managed, VoIP support, DSCP support, 3 fans, cable test, BPDU, IGMP querier, DNS client, Voice VLAN, LLDP-MED, Guest VLAN, UDP, protected ports, ZTP, EEE, WRR, loopback detection, egress rate limiting, block unknown multicast, Advanced QoS, Unknown Storm Control, EAPOL |
| Compliant Standards | IEEE 802.1D, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3az, UPnP |
| Processor | : 1 GHz |
| RAM | 256 MB |
| Flash Memory | 64 MB |
| Status Indicators | Power, fan, link/activity/speed, PoE max |
Expansion / Connectivity
| Interfaces | 4 x 100/1000/2.5G RJ-45 PoE++ - 60 W 4 x 100/1000/2.5G/5G/10G RJ-45 PoE++ - 60 W 2 x 10GBase-X SFP+ uplink |
|---|
Power
| Power Device | Internal power supply |
|---|---|
| Installed Qty | 1 |
| Power Consumption Operational | 380 watt |
Miscellaneous
| Included Accessories | Rubber feet |
|---|---|
| Rack Mounting Kit | Included |
| MTBF | 848,553 hours |
| Localisation | Europe |
Dimensions & Weight
| Width | 33 cm |
|---|---|
| Depth | 20.6 cm |
| Height | 4.3 cm |
| Weight | 2.51 kg |
Manufacturer Warranty
| Service & Support | Limited warranty - replacement - lifetime - response time: next business day |
|---|
Environmental Parameters
| Min Operating Temperature | 0 °C |
|---|---|
| Max Operating Temperature | 50 °C |
| Humidity Range Operating | 90% (non-condensing) |
| Min Storage Temperature | -20 °C |
| Max Storage Temperature | 70 °C |
| Humidity Range Storage | 95% (non-condensing) |
Product features
Enhanced connectivity
With a variety of ports including 100/1000/2.5G and 10G SFP+ uplinks, the NETGEAR Smart MS510TXUP switch ensures versatile connectivity options for a wide range of devices and network demands, making it an ideal solution for growing businesses.Robust security features
Equipped with advanced security protocols such as Extensible Authentication Protocol (EAP), RADIUS, and TACACS+, along with TLS 1.2 encryption, this switch provides a secure networking environment to protect sensitive data from unauthorized access.Efficient power management
Featuring PoE++ with a generous 295 W budget, the switch delivers power and data over a single cable to PoE-enabled devices like IP cameras and VoIP phones, reducing cable clutter and power infrastructure costs.High performance
Boasting a fabric throughput of 140 Gbps and forwarding rates up to 14.8 Mpps, the MS510TXUP switch handles large data volumes with ease, ensuring smooth and reliable network performance even under heavy traffic conditions.Smart management features
Cloud managed with support for Zero-touch provisioning (ZTP) and dual firmware images, this switch simplifies network setup and maintenance, offering a user-friendly experience without compromising on advanced functionalities.Key selling points
- Connect and power your WAX610 with MS510TXUP
- Manage all devices from a single dashboard with NETGEAR Insight Powerful Connectivity and Security
- Advanced VLAN support for better network segmentation
- L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication
- Advanced per port PoE controls for remote power management of PoE powered devices including operation scheduling
- Advanced QoS (Quality of Service) for traffic prioritization including portbased, 802.1p and L2/L3/L4 DSCPbased
- Auto "denial-of-service" (DoS) prevention
- IGMP Snooping and Querier for multicast optimization
- Egress Rate limiting and priority queuing for better bandwidth allocation
- Port mirroring for network monitoring
- Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings
- IPv6 management: IPv6 QoS, IPv6 ACL, IPv6 Multicast, and static and dynamic IPv6 address assignment
- Cable test to troubleshoot connection issues
- Easy-to-use Web browser-based management GUI available in English, German and Japanese
- SNMP v1, v2c, v3 and RMON remote monitoring
References
MPN: MS510TXUP-100EUS
Customers Also Bought
What our Customers think about us!
Page generated at:
17/06/2026 01:19:06