Noctua NF-A6x25 FLX
Case fan | 60 mm
Main Specification
| Product Description | Noctua NF-A6x25 FLX - case fan |
|---|---|
| Product Type | Case fan |
| Package Content | Ultra-Low-Noise Adapter (U.L.N.A.), Low-Noise Adapter (L.N.A.), 3-pin plug to 4-pin Molex adapter, 4 screws |
| Fan Diameter | 60 mm |
| Fan Height | 25 mm |
| Fan Bearing | SSO2 bearing |
| Rotation Speed | 1600-3000 rpm |
| Air Flow | 16.7-29.2 cfm |
| Noise Level | 8.2 - 19.3 dBA |
| Power Connector | 3-pin plug |
| Rated Voltage | 12 V |
| Dimensions (WxDxH) | 6 cm x 6 cm x 2.5 cm |
| Manufacturer Warranty | 6-year warranty |
General
| Product Type | Case fan |
|---|---|
| Package Content | Ultra-Low-Noise Adapter (U.L.N.A.), Low-Noise Adapter (L.N.A.), 3-pin plug to 4-pin Molex adapter, 4 screws |
| Width | 6 cm |
| Depth | 6 cm |
| Height | 2.5 cm |
Heatsink & Fan
| Fan Diameter | 60 mm |
|---|---|
| Fan Height | 25 mm |
| Fan Bearing | SSO2 bearing |
| Rotation Speed | 1600-3000 rpm |
| Air Flow | 16.7-29.2 cfm |
| Noise Level | 8.2 - 19.3 dBA |
| Power Connector | 3-pin plug |
| Rated Voltage | 12 V |
| Rated Current | 0.12 A |
| Power Consumption | 1.44 W |
| Cable Length | 30 cm |
Miscellaneous
| Mounting Kit | Included |
|---|---|
| MTBF | 150,000 hour(s) |
Manufacturer Warranty
| Service & Support | Limited warranty: - 6 years |
|---|
Product features
Flow acceleration channels
The NF-A6x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.Reduced motor hub size
Thanks to its streamlined, compact motor design, the NF-A6x25's motor hub is smaller than with conventional 6cm fans. This allows for more blade surface area and thus contributes to the NF-A6x25's superior airflow and pressure performance.AAO frame
Noctua's AAO (Advanced Acoustic Optimization) frames feature integrated anti-vibration pads as well as Noctua's proprietary stepped Inlet design and Inner surface microstructures, both of which further refine the fan's performance/noise efficiency.Stepped inlet design
Noctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments.Inner surface microstructures
With the tips of the fan blades ploghing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.Integrated anti-vibration pads
Integrated anti-vibration pads made from extra-soft silicone minimize the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.SSO2 bearing
The NF-A6x25 features the further optimized second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilization, precision and durability.Key selling points
- Flow acceleration channels
- Reduced motor hub size
- AAO frame
- Stepped inlet design
- Inner surface microstructures
- Integrated anti-vibration pads
- SSO2 bearing
References
MPN: NF-A6x25 FLX
What our Customers think about us!
Page generated at:
04/06/2026 03:53:16