PLANET GS-4210-8P2S

Switch | L4 | Managed | 8 x 10/100/1000 (PoE+) + 2 x SFP | rack-mountable | PoE+ (120 W)

MPN GS-4210-8P2S
Manufacturer Planet
QuickCode 1652688
Qty immediately available 28
Total stock 28
£140.66 inc VAT
£117.22 ex VAT
Quantity in Cart:
Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description PLANET GS-4210-8P2S - switch - Managed - rack-mountable
Device Type Switch - L4 - Managed
Enclosure Type Rack-mountable 1U
Subtype Gigabit Ethernet
Ports 8 x 10/100/1000 (PoE+) + 2 x SFP
Power Over Ethernet (PoE) PoE+
PoE Budget 120 W
Performance Switching fabric bandwidth: 20 Gbps Throughput (64-byte packet size): 14.88 Mpps
Capacity VLAN groups: 256 VLANs supported: 4094 IGMP snooping groups: 256
MAC Address Table Size 8K entries
Jumbo Frame Support 10000 bytes
Routing Protocol IGMPv2, IGMPv3, MLDv2, MLD
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, TFTP, SSH
Features Flow control, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DoS attack prevention, port mirroring, WRR queuing, store and forward, MAC address filtering, Broadcast Storm Control, IPv6 support, half duplex mode, full duplex mode, Multicast Storm Control, Unicast Storm Control, firmware upgradable, SNTP support, STP support, RSTP support, MSTP support, DHCP snooping, TFTP support, ACL support, QoS, DHCP server, MLD snooping, DAI, reset button, IPv4 support, LLDP support, LACP, Port Security, anti-spoofing protection, IP-MAC binding, SNMP trap, GVRP, loop prevention, CoS, tagged VLAN, TFTP client, 8KV ESD Protector, ToS, DSCP support, PoE circuit sorting protection, MAC and IP-based ACLs support, Back Pressure Support, port filtering, BPDU, PoE management
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3at
Power AC 120/230 V (50/60 Hz)
Dimensions (WxDxH) 33 cm x 15.5 cm x 4.35 cm
Weight 1.687 kg

General

Device Type Switch - L4 - Managed
Enclosure Type Rack-mountable 1U
Subtype Gigabit Ethernet
Ports 8 x 10/100/1000 (PoE+) + 2 x SFP
Power Over Ethernet (PoE) PoE+
PoE Budget 120 W
Performance Switching fabric bandwidth: 20 Gbps Throughput (64-byte packet size): 14.88 Mpps
Capacity VLAN groups: 256 VLANs supported: 4094 IGMP snooping groups: 256
MAC Address Table Size 8K entries
Jumbo Frame Support 10000 bytes
Routing Protocol IGMPv2, IGMPv3, MLDv2, MLD
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, TFTP, SSH
Encryption Algorithm SSL
Authentication Method RADIUS, TACACS+
Features Flow control, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DoS attack prevention, port mirroring, WRR queuing, store and forward, MAC address filtering, Broadcast Storm Control, IPv6 support, half duplex mode, full duplex mode, Multicast Storm Control, Unicast Storm Control, firmware upgradable, SNTP support, STP support, RSTP support, MSTP support, DHCP snooping, TFTP support, ACL support, QoS, DHCP server, MLD snooping, DAI, reset button, IPv4 support, LLDP support, LACP, Port Security, anti-spoofing protection, IP-MAC binding, SNMP trap, GVRP, loop prevention, CoS, tagged VLAN, TFTP client, 8KV ESD Protector, ToS, DSCP support, PoE circuit sorting protection, MAC and IP-based ACLs support, Back Pressure Support, port filtering, BPDU, PoE management
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3at
Status Indicators Power, 1000M device connected, PoE, link/activity, fan

Expansion / Connectivity

Interfaces 8 x 1000Base-T RJ-45 36 W 2 x 1000Base-X SFP

Power

Power Device Internal power supply
Voltage Required AC 120/230 V (50/60 Hz)
Power Consumption Operational 165 watt

Miscellaneous

Compliant Standards FCC Part 15 A, LVD

Dimensions & Weight

Width 33 cm
Depth 15.5 cm
Height 4.35 cm
Weight 1.687 kg

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 50 °C
Humidity Range Operating 5 - 95% (non-condensing)
Min Storage Temperature -20 °C
Max Storage Temperature 70 °C
Humidity Range Storage 5 - 95% (non-condensing)
Product features

A perfect Managed PoE+ Switch with L2/L4 switching and security

PLANET GS-4210-8P2S is a cost-optimized, desktop-size Managed Gigabit PoE+ Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 8 10/100/1000 BASE-T ports featuring 36-Watt 802.3at PoE+ and 2 additional Gigabit SFP slots. With a total power budget of up to 120 Watts for different kinds of PoE applications, it provides a quick, safe and cost-effective Power over Ethernet network solution for small businesses and enterprises.

Intelligent powered device alive-check

The GS-4210-8P2S can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the GS-4210-8P2S will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD's power source and reducing administrator management burden.

Scheduled power recycling

The GS-4210-8P2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.

PoE schedule for energy saving

Under the trend of energy saving worldwide and contributing to environmental protection, the GS-4210-8P2S can effectively control the power supply besides its capability of giving high Watts power. The "PoE schedule" function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or Enterprises save power and money. It also increases security by powering off PDs that should not be in use during non-business hours.

PoE usage monitoring

Via the power usage chart in the web management interface, the GS-4210-8P2S enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities.

Environment-friendly, smart fan design for silent operation

The GS-4210-8P2S features a desktop-sized metal housing, a low noise design and an effective ventilation system. It supports the smart fan technology that automatically controls the speed of the built-in fan to reduce noise and maintain the temperature of the PoE switch for optimal power output capability. The GS-4210-8P2S is able to operate reliably, stably and quietly in any environment without affecting its performance.

IPv6 / IPv4 dual stack management

Supporting both IPv6 and IPv4 protocols, the GS-4210-8P2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.

Robust layer 2 features

The GS-4210-8P2S can be programmed for switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-8P2S allows the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.

Efficient traffic control

The GS-4210-8P2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees a great performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.

Powerful security

PLANET GS-4210-8P2S offers comprehensive IPv4 / IPv6 Layer 2 to layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port.

Enhanced network security

The GS-4210-8P2S also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.

Friendly and secure management

For efficient management, the GS-4210-8P2S is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the GS-4210-8P2S offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the GS-4210-8P2S offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session.

Flexibility and long-distance extension solution

The two mini-GBIC slots built in the GS-4210-8P2S support SFP auto-detection and dual speed as it features 100 BASE-FX and 1000 BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

Intelligent SFP diagnosis mechanism

The GS-4210-8P2S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.
Key selling points
  • A perfect Managed PoE+ Switch with L2/L4 switching and security
  • Intelligent powered device alive-check
  • Scheduled power recycling
  • PoE schedule for energy saving
  • PoE usage monitoring
  • Environment-friendly, smart fan design for silent operation
  • IPv6 / IPv4 dual stack management
  • Robust layer 2 features
  • Efficient traffic control
  • Powerful security
  • Enhanced network security
  • Friendly and secure management
  • Flexibility and long-distance extension solution
  • Intelligent SFP diagnosis mechanism
References

MPN: GS-4210-8P2S

What our Customers think about us!

What our Customers think about us!

Page generated at: 25/06/2026 17:36:53