PLANET IGTP-802TS
Fibre media converter | 1GbE | 10Base-T, 1000Base-LX, 100Base-TX, 1000Base-T | SC single-mode / RJ-45 | up to 20 km | 1310 nm | TAA Compliant
Images for illustration purposes only, actual product may differ
Main Specification
| Product Description | PLANET IGTP-802TS - fibre media converter - 10Mb LAN, 100Mb LAN, 1GbE - TAA Compliant |
|---|---|
| Device Type | Fibre media converter - SC single-mode / RJ-45 |
| Form Factor | Wall / DIN rail mountable |
| Cabling Type | 10Base-T, 1000Base-LX, 100Base-TX, 1000Base-T |
| Optical Wave Length | 1310 nm |
| Data Link Protocol | 10Mb LAN, 100Mb LAN, 1GbE |
| Max Transfer Distance | 20 km |
| Power Over Ethernet (PoE) | PoE+ |
| Power | AC 24 / DC 12-48 V |
| Dimensions (WxDxH) | 13.5 cm x 8.7 cm x 3.2 cm |
| Weight | 416 g |
| TAA Compliant | Yes |
General
| Device Type | Fibre media converter |
|---|---|
| Form Factor | Wall / DIN rail mountable |
Networking
| Connectivity Technology | Wired |
|---|---|
| Cabling Type | 10Base-T, 1000Base-LX, 100Base-TX, 1000Base-T |
| Data Link Protocol | 10Mb LAN, 100Mb LAN, 1GbE |
| Optical Wave Length | 1310 nm |
| Max Transfer Distance | 20 km |
| Status Indicators | PoE, link/activity, fault, power 1, power 2 |
| Features | Flow control, auto-negotiation, auto-uplink (auto MDI/MDI-X), half duplex mode, full duplex mode, built-in DIP switch, 6KV ESD Protector, Back Pressure Support, 9 KB Jumbo Frame |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.3at |
Expansion / Connectivity
| Interfaces | 1 x Ethernet 1000Base-LX - SC single-mode x 2 1 x Ethernet 10Base-T/100Base-TX/1000Base-T (PoE+) - RJ-45 - 30 W 1 x relay (output) |
|---|
Miscellaneous
| Compliant Standards | Plug and Play, IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, FCC Part 15 A, IP30 |
|---|---|
| TAA Compliant | Yes |
Power
| Power Over Ethernet (PoE) | PoE+ |
|---|---|
| Voltage Required | AC 24 / DC 12-48 V |
Dimensions & Weight
| Width | 13.5 cm |
|---|---|
| Depth | 8.7 cm |
| Height | 3.2 cm |
| Weight | 416 g |
Environmental Parameters
| Min Operating Temperature | -40 °C |
|---|---|
| Max Operating Temperature | 75 °C |
| Humidity Range Operating | 5 - 90% (non-condensing) |
Product features
Fiber-optic link capability extends the range of network deployment
The maximum distance between a PoE PSE (power sourcing equipment) and PD via Ethernet cable is 100 meters. To extend the PoE deployment range, the IGTP-80xT is integrated with fiber interface for farther distance applications.Plug-and-Play high power sourcing solution
Complying with the IEEE 802.3at Power over Ethernet Plus technology, the IGTP-80xT provides up to 30 watts of PoE output power, doubling that of the earlier 802.3af. It is also backward compatible with 802.3af PoE standards to allow users to flexibly deploy standard and high powered devices simultaneously with no need of software configuration. With data and Power over Ethernet from one unit, the IGTP-80xT can reduce cable deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place.Convenient and reliable power system
To facilitate the 802.3at power PoE+ usage with the commonly-used 12-48 V DC power input or 24 V AC power input for transportation and industrial-level applications, the IGTP-80xT adopts the 12-48V DC to 52 V power boost technology to solve power source issue but does not require special power supplies. Its wide-ranging voltages design is suitable for worldwide operability with high availability applications requiring dual or backup power inputs.Key selling points
- Fiber-optic link capability extends the range of network deployment
- Plug-and-Play high power sourcing solution
- Convenient and reliable power system
References
MPN: IGTP-802TS
What our Customers think about us!
Page generated at:
15/07/2026 20:57:17