Order by 4:30pm UK Time
(excluding weekends and Bank Holidays) for UK Mainland next working day delivery.
Shipping rates applicable only to UK Mainland Addresses and
exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands,
Channel Islands and Isle of Man.
7 Working Days£0.00Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.983 working days (UK Mainland)
Next Working Day£7.97Next working day (UK Mainland)
8 x 1000Base-T RJ-45
24 x 1000Base-X SFP
4 x Gigabit / 10Gbit LAN SFP+ uplink/stacking
1 x management RJ-45
1 x console RJ-45
1 x USB 2.0 Type A
Power
Power Device
Internal power supply
Voltage Required
AC 120/230 V (50/60 Hz)
Miscellaneous
Compliant Standards
FCC Part 15 A
Dimensions & Weight
Width
44 cm
Depth
24 cm
Height
4.36 cm
Weight
3.173 kg
Environmental Parameters
Min Operating Temperature
0 °C
Max Operating Temperature
50 °C
Humidity Range Operating
5 - 90% (non-condensing)
Min Storage Temperature
-10 °C
Max Storage Temperature
70 °C
Humidity Range Storage
5 - 90% (non-condensing)
Product features
High-performance 10Gbps Ethernet capacity
The four SFP+ slots built in the SGS-6341 series support dual-speed, 10GBASE- SR/LR or 1000BASE-SX/LX. With 10Gbps uplink interfaces the SGS-6341 series boasts a high-performance switch architecture that is capable of providing non- blocking switch fabric and wire speed throughput as high as l28 Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.
AC and DC redundant power to ensure continuous operation
The SGS-6341-16S8C4XR is equipped with one 100-240V AC power supply unit and one additional 12V DC power supply unit for redundant power supply. A redundant power system is also provided to enhance the reliability with either AC or DC power supply unit. The redundant power system is specifically designed to handle the demands of high-tech facilities requiring the highest power integrity.
IP Stacking management
The SGS-6341-24T4X supports IP stacking function that helps network managers easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. The IP Stacking technology groups PLANET SGS-6341 switch series together to enable centralized management through a single unit, regardless of physical location or switch type, as long as they are connected to the same local network.
High-reliability hardware stacking
Two of the 10G SFP+ ports are used to connect several SGS-6341 series to build a virtually logical facility The SGS-6341 series gives the enterprises, service providers and telecoms flexible control over port density, uplinks and switch stack performance. The SGS-6341 series can connect as a ring for redundancy and ensures that data integrity is retained even if one switch in the stack fails. You can even hot-swap switches without disrupting the network, which greatly simplifies the tasks of upgrading the LAN for catering lo increasing bandwidth demands.
Layer 3 routing support
The SGS-6341 series enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, and the RIP or OSPF settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination The OSPF is an interior dynamic routing protocol for autonomous system based on link stale. The protocol creates a database for link state by exchanging link slates among Layer 3 switches and then uses the Shortest Path First algorithm to generate a route table based on that database.
Full IPv6 support
The SGS-6341 series provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRR and RADIUS authentication. It thus helps the enterprises to step in the IPv6 era with the lowest investment In addition, you don't need to replace the network facilities when the IPv6 FTTx edge network is built.
Robust Layer 2 features
The SGS-6341 series can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Multiple Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. This switch provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By supporting port aggregation, the SGS-6341 series allows the operation of a high- speed trunk combined with multiple ports. It enables up to 128 groups for trunking with a maximum of 8 ports for each group.
Excellent Layer 2 to Layer 4 traffic control
The SGS-6341 series is loaded with powerful traffic management and WRR features to enhance services offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications. It also empowers the enterprises to take full advantage of the limited network resources and guarantees the best in VoIP and video conferencing transmission
Key selling points
High-performance 10Gbps Ethernet capacity
AC and DC redundant power to ensure continuous operation
Goods are dispatched by post or by overnight courier or Royal Mail and should be delivered within one or two working days of dispatch. Ballicom Limited accepts no responsibility where the Courier or Postal Service is at fault for delayed delivery once the goods have been dispatched. We currently sell just under 100,000 products and Available Stock may be stored at more than one warehouse If Collecting please check first as we may need to arrange shipment of the item to the Trade Counter first.
