HPE StoreFabric SN6610C

Switch | Managed | 8 x 32Gb Fibre Channel QSFP | rack-mountable

MPN Q9D34A#ABU
Manufacturer HPE
QuickCode 1553956
Qty immediately available 0
Total stock 0
RRP: £7,411.00 inc VAT
£3,252.54 inc VAT
£2,710.45 ex VAT
Save
56%

This item is out of stock

We are an Authorised Silver Partner

All products come in brand new original packaging.

Delivery
Order by 4:30pm UK Time (excluding weekends and Bank Holidays) for UK Mainland next working day delivery.

Shipping rates applicable only to UK Mainland Addresses and exclude Northern Ireland, Eire, Scottish Offshore, Scottish Highlands, Channel Islands and Isle of Man.

7 Working Days£0.00 Within 1 week (UK Mainland), free if order over £100 + VAT
3 Working Days£4.98 3 working days (UK Mainland)
Next Working Day£7.97 Next working day (UK Mainland)
Delivery exceptions apply

Main Specification

Product Description HPE StoreFabric SN6610C - switch - 8 ports - Managed - rack-mountable
Device Type Switch - 8 ports - Managed
Enclosure Type Rack-mountable 1U
Subtype Fibre Channel
Ports 8 x 32Gb Fibre Channel QSFP
Performance Aggregate bandwidth: 2 Tbps Port-to-port latency: 700 ns
Capacity Maximum frame size: 2112
Remote Management Protocol SNMP 1, SNMP 3, HTTP, HTTPS, SMI-S, SSH, SSH-2, CLI
Features ISL support, Syslog support, manageable, QoS, RSCN support, SFTP client, SFTP server, ISL Trunking, FSPF, FDMI, SCP, RBAC, DPS, RCS, SNS, FPI monitoring, SDDQ, DFP, Enhanced BB Credit Recovery
Power AC 120/230 V (50/60 Hz)
Power Redundancy Yes
Dimensions (WxDxH) 44 cm x 35.56 cm x 4.39 cm
Weight 7.73 kg
Localisation English / United Kingdom
Manufacturer Warranty 1-year warranty

General

Device Type Switch - 8 ports - Managed
Enclosure Type Rack-mountable 1U
Subtype Fibre Channel
Ports 8 x 32Gb Fibre Channel QSFP
Performance Aggregate bandwidth: 2 Tbps Port-to-port latency: 700 ns
Capacity Maximum frame size: 2112
Remote Management Protocol SNMP 1, SNMP 3, HTTP, HTTPS, SMI-S, SSH, SSH-2, CLI
Encryption Algorithm SSL
Authentication Method RADIUS, TACACS+, LDAP, DH-CHAP, FCAP
Features ISL support, Syslog support, manageable, QoS, RSCN support, SFTP client, SFTP server, ISL Trunking, FSPF, FDMI, SCP, RBAC, DPS, RCS, SNS, FPI monitoring, SDDQ, DFP, Enhanced BB Credit Recovery

Expansion / Connectivity

Interfaces 8 x 32Gb Fibre Channel QSFP 1 x 100Base-TX RJ-45 management 1 x console RJ-45 management 1 x USB Type A

Power

Power Device Internal power supply - hot-plug
Installed Qty 2
Max Supported Qty 2
Power Redundancy Yes
Power Redundancy Scheme 1+1
Voltage Required AC 120/230 V (50/60 Hz)

Miscellaneous

Cables Included 1 x serial cable
Rack Mounting Kit Included
Localisation English / United Kingdom

Software / System Requirements

Software Included Advanced Fabric OS, Advanced Web Tools, Advanced Zoning, Power Pack+, ISL Trunking, Extended Fabric

Dimensions & Weight

Width 44 cm
Depth 35.56 cm
Height 4.39 cm
Weight 7.73 kg

Manufacturer Warranty

Service & Support Limited warranty - parts and labour - 1 year - on-site

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 10 - 85% (non-condensing)
Min Storage Temperature -25 °C
Max Storage Temperature 70 °C
Product features

High Performance for NVMe/All-flash Arrays and Virtualized Workloads

HPE Storage Fibre Channel Switch C-series SN6610C provides consistent 32 Gbps low-latency performance across every FC port on the switch. Delivers increased performance with an aggregate bandwidth of 1024 Gbps for growing and dynamic workloads. Delivers the same outstanding availability and reliability as previous generation HPE Storage Fibre Channel Switch C-series SN6610C by providing optional redundancy on all major components such as power supplies and fans. Provides visibility into each virtual machine logged into the fabric through HBAs capable of priority tagging the Virtual Machine Identifier (VMID) on every FC frame. On-board hardware that protects the entire system from malicious attacks by limiting access to critical components such as the bootloader, system image loader and Joint Test Action Group (JTAG) interface.

Investment Protection

The HPE Storage Fibre Channel Switch C-series SN6610C  provides an option to deploy as few as eight 32 Gbps Fibre Channel (FC) ports which can grow from 8 ports to 16 ports, and thereafter with a port expansion module. Expanding up to a maximum of 32 ports. Configurable with 16 Gb FC SFP+ or 32 Gb FC SFP+ optics to accommodate your budget while being fully prepared for tomorrow. Lower initial investment and power consumption for entry-level configurations of up to 8 ports compared to a fully loaded 32 port switch.

Intelligent Network Services for Modern SAN

The HPE Storage Fibre Channel Switch C-series SN6610C supports slow-drain detection and isolation, VSAN technology, access control lists for hardware-based intelligent frame processing, smart zoning, and other various services. The VSAN technology provides a cost-effective way to consolidate resources while providing high resiliency to potential fabric disruptions. Provides powerful Representational State Transfer (REST) and NX-API capabilities to enable flexible and rapid programming of utilities for the SAN.

Easy Manageability

The HPE Storage Fibre Channel Switch C-series SN6610C provides intelligent diagnostics tools such as inter-switch link diagnostics, read diagnostic parameters, protocol decoding, network analysis tools, and others for improved reliability, faster problem resolution, and reduced service costs. Consolidate separate physical SAN fabrics into one large fabric for ease of management and reduced total cost of ownership. Cisco Data Center Network Manager (Essentials Edition) software, included with switch, provides a centralized management tool with task-based wizards. Additional advanced features are available with the DCNM / Cisco Nexus Dashboard Fabric Controller (NDFC) licensed version, sold separately. Starting NX-OS 9.2(1), DCNM is renamed as Cisco Nexus Dashboard Fabric Controller (NDFC). HPE C-series SAN Insights (Cisco SAN Analytics) delivers deep visibility into I/O traffic between the compute and the storage infrastructure. This information is in addition to the already-available visibility obtained from individual ports, switches, servers, virtual machines, and storage arrays.
Key selling points
  • HPE Storage Fibre Channel Switch C-series SN6610C provides consistent 32 Gbps low-latency performance across every FC port on the switch.
  • The HPE Storage Fibre Channel Switch C-series SN6610C  provides an option to deploy as few as eight 32 Gbps Fibre Channel (FC) ports which can grow from 8 ports to 16 ports, and thereafter with a port expansion module. Expanding up to a maximum of 32 ports.
  • The HPE Storage Fibre Channel Switch C-series SN6610C supports slow-drain detection and isolation, VSAN technology, access control lists for hardware-based intelligent frame processing, smart zoning, and other various services.
  • The HPE Storage Fibre Channel Switch C-series SN6610C provides intelligent diagnostics tools such as inter-switch link diagnostics, read diagnostic parameters, protocol decoding, network analysis tools, and others for improved reliability, faster problem resolution, and reduced service costs.
References

MPN: Q9D34A#ABU

What our Customers think about us!

What our Customers think about us!

Page generated at: 04/06/2026 20:29:29