Zyxel SFP10G-SR
SFP+ transceiver module | 10GbE | 10GBase-SR | LC multi-mode | up to 300 m | 850 nm | for Zyxel XGS1910-24, XGS1910-48
Main Specification
| Product Description | Zyxel SFP10G-SR - SFP+ transceiver module - 10GbE |
|---|---|
| Device Type | SFP+ transceiver module - LC multi-mode |
| Form Factor | Plug-in module |
| Cabling Type | 10GBase-SR |
| Data Transfer Rate | 10 Gbps |
| Optical Wave Length | 850 nm |
| Data Link Protocol | 10GbE |
| Max Transfer Distance | 300 m |
| Dimensions (WxDxH) | 1.48 cm x 5.65 cm x 1.185 cm |
| Weight | 20 g |
| Manufacturer Warranty | 5-year warranty |
| Designed For | Zyxel XGS1910-24, XGS1910-48 |
General
| Device Type | SFP+ transceiver module |
|---|---|
| Form Factor | Plug-in module |
Networking
| Connectivity Technology | Wired |
|---|---|
| Cabling Type | 10GBase-SR |
| Data Link Protocol | 10GbE |
| Data Transfer Rate | 10 Gbps |
| Optical Wave Length | 850 nm |
| Max Transfer Distance | 300 m |
| Features | Hot swap module replacement, Digital Diagnostics Monitoring Interface (DDMI) |
Expansion / Connectivity
| Interfaces | 1 x Ethernet 10GBase-SR - LC multi-mode x 2 |
|---|---|
| Compatible Slots | 1 x SFP+ |
Miscellaneous
| Compliant Standards | TUV, Laser Class 1, FCC CFR21 Part 1040, FDA, MSA |
|---|
Dimensions & Weight
| Width | 1.48 cm |
|---|---|
| Depth | 5.65 cm |
| Height | 1.185 cm |
| Weight | 20 g |
Manufacturer Warranty
| Service & Support | Limited warranty - 5 years |
|---|
Environmental Parameters
| Min Operating Temperature | 0 °C |
|---|---|
| Max Operating Temperature | 70 °C |
Compatibility Information
| Designed For | Zyxel XGS1910-24, XGS1910-48 |
|---|
Product features
Standard-based design assures compatibility
The ZyXEL transceiver family follows industry standards to assure compatibility with switches from other manufacturers without barrier set by proprietary technologies.Hot-swappable design facilitates network maintenance
Independent transceiver design provides the highest network maintenance flexibility. Transceivers can be freely added when required, and infrastructure upgrades or transceiver repairs can be done easily by just replacing the transceiver instead of the whole device.Bi-directional transceivers maximizes usage of existing fiber plant
Traditional fiber optic networking requires two strands of fiber to accomplish communications, in which one strand is reserved for sending signals, while the other is for receiving. On the other hand, bi-directional, dual-wavelength transceivers can establish communications over just one strand of fiber by using two separate optical wavelengths: one receives and the other transmits signals. Transmission capacity can be expanded immediately without additional cost laying fiber.Supporting Digital Diagnostics Monitoring Interface (DDMI) SFP enhances management capability
The enhanced digital interface enables a real time link to be established between the switch and the SFP transceiver. This enables the switch to access operating parameters within the fiber link. This includes digital features such as soft control and monitoring of SFP I/O signals.Key selling points
- Standard-based design assures compatibility
- Hot-swappable design facilitates network maintenance
- Bi-directional transceivers maximizes usage of existing fiber plant
- Supporting Digital Diagnostics Monitoring Interface (DDMI) SFP enhances management capability
References
MPN: SFP10G-SR-ZZ0101F
Customers Also Bought
Intrusion Detection / Prevention Products Recommended
What our Customers think about us!
Page generated at:
04/06/2026 05:00:03