Startech 2-Port 2.5Gbps PoE Network Card, Intel I225-V, 802.3af/at
Network adapter | PCIe 2.0 x2 | 10M/100M/1G/2.5 Gigabit Ethernet x 2 | black
Images for illustration purposes only, actual product may differ
More like this
In this category:
Main Specification
| Product Description | Startech 2-Port 2.5Gbps PoE Network Card, Intel I225-V, 802.3af/at - network adapter - PCIe 2.0 x2 - 10M/100M/1G/2.5 Gigabit Ethernet x 2 |
|---|---|
| Device Type | Network adapter |
| Form Factor | Plug-in card |
| Interface (Bus) Type | PCI Express 2.0 x2 |
| PCI Specification Revision | PCIe 2.0 |
| Ports | 10M/100M/1G/2.5 Gigabit Ethernet x 2 |
| Dimensions (WxDxH) | 2.2 cm x 18 cm x 12.1 cm |
| Weight | 111 g |
| Cabling Type | Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 2.5GBase-T |
| Data Link Protocol | 10Mb LAN, 100Mb LAN, 1GbE, 2.5GbE |
| Data Transfer Rate | 2.5 Gbps |
| Capacity | Jumbo frame size: 9000 |
| Processor | Intel I225-V |
| Compliant Standards | IEEE 802.3u, IEEE 802.3i, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.1x, IEEE 802.1as, IEEE 802.3at, IEEE 802.3bz, IEEE P802.3az, IEEE 1588 PTP |
| Colour | Black |
| System Requirements | Microsoft Windows Server 2019, VMware ESXi 7.0, Microsoft Windows Server 2022, Microsoft Windows 10 / 11, Linux 5.8.x or later (LTS versions only) |
| Manufacturer Warranty | 2-year warranty |
General
| Device Type | Network adapter |
|---|---|
| Form Factor | Plug-in card |
| Interface (Bus) Type | PCI Express 2.0 x2 |
| PCI Specification Revision | PCIe 2.0 |
Networking
| Ports | 10M/100M/1G/2.5 Gigabit Ethernet x 2 |
|---|---|
| Connectivity Technology | Wired |
| Cabling Type | Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 2.5GBase-T |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet, 2.5 Gigabit Ethernet |
| Data Transfer Rate | 2.5 Gbps |
| Capacity | Jumbo frame size: 9000 |
| Status Indicators | PoE, link/activity, link/speed |
| Features | Full duplex capability, auto-negotiation, VLAN support, WOL, QoS, PSE, EEE, AVB, promiscuous mode, Auto MDIX, PXE boot, bus powered, built-in heatsink |
| Compliant Standards | IEEE 802.3u, IEEE 802.3i, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.1x, IEEE 802.1as, IEEE 802.3at, IEEE 802.3bz, IEEE P802.3az, IEEE 1588 PTP |
Processor / Memory
| Processor | Intel I225-V |
|---|
Expansion / Connectivity
| Interfaces | 2 x 2.5Gb Ethernet - RJ-45 - female 1 x LP4 - 4 pin power - female 1 - 8 (6+2) pin power - female |
|---|
Miscellaneous
| Included Accessories | Low-profile bracket |
|---|---|
| Compliant Standards | RoHS, WEEE |
| Colour | Black |
Software / System Requirements
| OS Required | Microsoft Windows Server 2019, VMware ESXi 7.0, Microsoft Windows Server 2022, Microsoft Windows 10 / 11, Linux 5.8.x or later (LTS versions only) |
|---|
Dimensions & Weight
| Width | 2.2 cm |
|---|---|
| Depth | 18 cm |
| Height | 12.1 cm |
| Weight | 111 g |
Dimensions & Weight (Shipping)
| Shipping Width | 3.8 cm |
|---|---|
| Shipping Depth | 20.7 cm |
| Shipping Height | 14.4 cm |
Manufacturer Warranty
| Service & Support | Limited warranty - 2 years |
|---|
Environmental Parameters
| Min Operating Temperature | 0 °C |
|---|---|
| Max Operating Temperature | 55 °C |
| Humidity Range Operating | 5 - 90% RH |
Product features
Power Over Ethernet
The PCIe Ethernet card supports the IEEE 802.3af and IEEE 802.3at (Type 1 and Type 2) standards for Power Sourcing Equipment (PSE) and can deliver up to 48V DC and 25.5W of power per port to compliant Powered Devices (PD). This flexibility eliminates the need for a separate power supplies or PoE injectors for remote networked devices such as IP cameras, access control devices, remote kiosks, and wireless access points.Increased Network Speed
The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities. Improve bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and the streaming of online content - while reducing network slowdowns. Access up to 2.5GBASE-T speeds using Cat5e (or better) cabling, to maximize existing networks and equipment.Enhance Existing Hardware
The network interface card connects through an available PCI Express x2 2.0 (or higher) expansion slot. The card ships with a standard-profile bracket pre-installed and includes a low-profile bracket for installation into small form factor systems and servers. This ethernet NIC card is compatible with Windows, Windows Server, VMware, and Linux. This card supports the following advanced features: PXE Boot, WoL, VLAN tagging, 9K jumbo frame, full-duplex, and Intel vPro technology.Key selling points
- 2-PORT 2.5G POE ETHERNET CARD: High-performance PCIe 2.5Gbps network card with dual Intel I225-V chips; Leverage existing Cat5e/Cat6 cabling (or better) without the use of a Power over Ethernet injector; NBASE-T compatible (802.3bz); PCI Express 2.0 x2
- POE+ COMPLIANT: Ethernet NIC provides up to 30W PSE and 25.5W PD per port at 48V DC to connected devices; Supports IEEE 802.3af (PoE) and 802.3at (PoE+) to power remote devices such as access points, RFID readers, and IP cameras
- IT MANAGEMENT: Intel vPro for remote management and troubleshooting; PXE boot enabled for centralized OS deployment and updates; 9K jumbo frame for reduced packet overhead; Remote system boot via WoL; VLAN support for efficient network management
- BUILD QUALITY: LAN card features built-in heatsink to keep controller chips running cool and for optimal performance, LED indicators for link status/speed, and LAN transformers maintain signal quality and reduced EMI for reliable communication
- COMPATIBILITY: 2.5GBASE-T variable speed options (2.5G/1G/100M/10M) with auto-negotiation; Multi-gigabit network interface card for PC is compatible with Windows, Windows Server, VMware, and Linux; Low profile bracket included for hardware compatibility
References
MPN: PR22GIP-NETWORK-CARD
Wired Network Adapters Products Recommended
What our Customers think about us!
Page generated at:
04/06/2026 01:21:22