Veracity HIGHWIRE Powerstar Base Unit
Network extender | 100Mb LAN | 10Base-T, 100Base-TX | up to 500 m
Main Specification
| Product Description | Veracity HIGHWIRE Powerstar Base Unit - network extender - 10Mb LAN, 100Mb LAN |
|---|---|
| Device Type | Network extender |
| Form Factor | External |
| Cabling Type | 10Base-T, 100Base-TX |
| Data Transfer Rate | 100 Mbps |
| Data Link Protocol | 10Mb LAN, 100Mb LAN |
| Max Transfer Distance | 500 m |
| Power Over Ethernet (PoE) | PoE+ |
| Dimensions (WxDxH) | 5.4 cm x 10.4 cm x 2.4 cm |
| Weight | 140 g |
General
| Device Type | Network extender |
|---|---|
| Form Factor | External |
Networking
| Connectivity Technology | Wired |
|---|---|
| Cabling Type | 10Base-T, 100Base-TX |
| Data Link Protocol | 10Mb LAN, 100Mb LAN |
| Data Transfer Rate | 100 Mbps |
| Max Transfer Distance | 500 m |
| Features | Auto-negotiation, full duplex mode |
| Compliant Standards | IEEE 802.3af, IEEE 802.3at |
Expansion / Connectivity
| Interfaces | 1 x Ethernet 10Base-T/100Base-TX - RJ-45 female 1 x network - BNC female |
|---|
Miscellaneous
| Compliant Standards | FCC, RoHS |
|---|
Power
| Power Over Ethernet (PoE) | PoE+ |
|---|---|
| Power Consumption Operational | 1.5 watt |
Dimensions & Weight
| Width | 5.4 cm |
|---|---|
| Depth | 10.4 cm |
| Height | 2.4 cm |
| Weight | 140 g |
Environmental Parameters
| Min Operating Temperature | 10 °C |
|---|---|
| Max Operating Temperature | 50 °C |
| Humidity Range Operating | 0 - 85% (non-condensing) |
Product features
Simply add power
With no need to configure IP addresses, set DIP switches, or makes awkward measurements and calculations, installing HIGHWIRE Powerstar is so straight forward, and all you need to do is plug it in. In the simplest implementation, shown below, the Base Unit receives POE power from a standard POE switch or injector and transmits it down the coax.Installer friendly
HIGHWIRE Powerstar features Veracity's unique SafeView display, to provide IP camera installers with an instant and very easy-to-understand confirmation of correct operation from either end of the cable. For example, the network link/activity and POE status of the IP camera can be viewed from the BASE unit, saving the time of accessing remote equipment.Key selling points
- Simply add power
- Installer friendly
References
MPN: VHW-HWPS-B
What our Customers think about us!
Page generated at:
04/06/2026 05:53:33