Vision CS-1900P
Speakers | wireless | Bluetooth | 35 watt | 2-way | coaxial | white (grille colour | white)
Images for illustration purposes only, actual product may differ
Main Specification
| Product Description | Vision CS-1900P - speakers - wireless |
|---|---|
| Product Type | Speakers |
| System Components | 2 speakers |
| Speaker Type | Coaxial - 2-way - active |
| Continuous Power | 35 watt |
| Frequency Response | 80 - 20000 Hz |
| Amplifier | Integrated |
| Interfaces | Bluetooth |
| Colour | White |
| Power | AC 100/120/230 V (50/60 Hz) |
| Manufacturer Warranty | Limited lifetime warranty |
General
| Product Type | Speakers |
|---|---|
| Enclosure Colour | White |
| Enclosure Material | ABS plastic |
| Grille Colour | White |
Speaker System
| System Components | 2 speakers |
|---|---|
| Speaker Type | Coaxial - 2-way - active |
| Continuous Power | 35 watt |
| Frequency Response | 80 - 20000 Hz |
| Amplifier | Integrated |
| Interfaces | Bluetooth |
| Recommended Placing | In-ceiling mounted |
Speaker System Details
| Driver Details | Speaker: woofer driver - 6.5" - kevlar Speaker: tweeter driver - 0.5" - silk |
|---|
Connections
| Connector Type | Audio line-in (RCA x 2) Audio line-in (mini-phone 3.5mm) Daisy chain audio input (mini-phone stereo 3.5 mm) Daisy chain audio output (mini-phone 3.5mm) |
|---|
Miscellaneous
| Included Accessories | IR remote control, magnetic speaker grilles, speaker cable (5 m) |
|---|
Power
| Voltage Required | AC 100/120/230 V (50/60 Hz) |
|---|
Dimensions & Weight
| Dimensions (WxDxH) / Weight Details | Master speaker: 22.4 cm x 22.4 cm x 9.5 cm / 1.3 kg Slave speaker: 22.4 cm x 22.4 cm x 9.5 cm / 1.2 kg |
|---|
Cutout & Mounting Dimensions
| Diameter | 19.8 cm |
|---|
Dimensions & Weight (Shipping)
| Shipping Width | 25.3 cm |
|---|---|
| Shipping Depth | 25.3 cm |
| Shipping Height | 27.3 cm |
| Shipping Weight | 4 kg |
Manufacturer Warranty
| Service & Support | Limited warranty - lifetime |
|---|
Product features
Rename Bluetooth, set pin
Connect via USB and run software to rename and set the pin. The speakers store the details for up to eight paired devices. Even if you change the PIN these eight devices will still connect without needing the new pin. When you pair a 9th device the 1st device will need to enter the password again to connect.Auto-switching
Choose to change to the Bluetooth input automatically when a device is paired, or manually switch.Remote control
An included IR remote control gives the user full control, including bass and treble adjustment.IR front and rear
Switch between the front IR receiver, or the rear IR receiver if using a wired control system, or off.Master/slave
The amplifier is housed in the "master" loudspeaker which has the connection panel, and a speaker output connects to the included passive "slave" loudspeaker.Daisy-chain
If you require two pairs for the room an audio output allows you to pass the audio signal on to a second pair of CS-1900P. In fact, you can daisy-chain as many pairs as you need using this line-level audio output.RS-232
For integration into a controlled audio-visual environment they can be controlled with RS-232 (serial) codes. Vision's Techconnect Control can be used to control them.2-way with Kevlar driver
Two-way woofer and tweeter design with quality materials and a passive cross-over for superior audio.Auto-standby
If the amplifier senses no input for ten minutes it will automatically go into standby mode.Key selling points
- Rename Bluetooth, set pin
- Auto-switching
- Remote control
- IR front and rear
- Master/slave
- Daisy-chain
- RS-232
- 2-way with Kevlar driver
- Auto-standby
References
MPN: CS-1900P
What our Customers think about us!
Page generated at:
09/06/2026 06:57:57