Zyxel WAX610D
Radio access point | 1GbE, 2.5GbE | Wi-Fi 6 | 2.4 GHz, 5 GHz
Main Specification
| Product Description | Zyxel WAX610D - radio access point - Wi-Fi 6 |
|---|---|
| Device Type | Radio access point |
| Form Factor | External |
| Localisation | Europe |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, 2.5 Gigabit Ethernet, 802.11ax |
| Frequency Band | 2.4 GHz, 5 GHz |
| Included Accessories | Mounting screws, mounting plate |
| Power Over Ethernet (PoE) Supported | PoE |
| Dimensions (WxDxH) | 18 cm x 18 cm x 3.9 cm |
| Weight | 545 g |
General
| Device Type | Radio access point |
|---|---|
| Width | 18 cm |
| Depth | 18 cm |
| Height | 3.9 cm |
| Weight | 545 g |
| Localisation | Europe |
Networking
| Form Factor | External |
|---|---|
| Connectivity Technology | Wireless |
| Line Coding Format | OFDMA |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, 2.5 Gigabit Ethernet, 802.11ax |
| Remote Management Protocol | SNMP, CLI |
| Frequency Band | 2.4 GHz, 5 GHz |
| Features | Load balancing, VLAN support, DiffServ support, manageable, MAC address filtering, Wireless Distribution System (WDS) support, firmware upgradable, surge protection, Wi-Fi Multimedia (WMM) support, rogue access point detection, MU-MIMO technology, Unscheduled Automatic Power Save Delivery (U-APSD), band steering, Fast Roaming, Dynamic Channel Selection (DCS), Wireless Mesh support |
| Encryption Algorithm | WPA, WPA2, WEP, WPA3, WPA3-Enterprise, WPA2-Personal |
| Authentication Method | RADIUS, Extensible Authentication Protocol (EAP) |
| Compliant Standards | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.11ac, IEEE 802.11ax, Wi-Fi CERTIFIED 6 |
Aerial
| Antenna | Internal |
|---|
Expansion / Connectivity
| Interfaces | 1 x 1/2.5GBase-T (PoE) - RJ-45 - 19 W 1 x 1000Base-T (uplink) - RJ-45 |
|---|
Miscellaneous
| Included Accessories | Mounting screws, mounting plate |
|---|---|
| MTBF | 329,004 hours |
| Compliant Standards | EN 61000-3-2, EN55022, EN 61000-3-3, EN55024, FCC Part 15 B, FCC Part 15 C, IEC 60950-1, EN 60950-1, FCC Part 15 E, BSMI CNS 13438, EN 60601-1-2, BSMI CNS 14336-1, EN 301 489-1, LP0002, ETSI EN 300 328, EN 301 893, EN 301 489-17 |
Power
| Power Over Ethernet (PoE) Supported | PoE |
|---|---|
| Power Device | External power adapter |
Dimensions & Weight (Shipping)
| Shipping Width | 22.9 cm |
|---|---|
| Shipping Depth | 21.6 cm |
| Shipping Height | 6.4 cm |
| Shipping Weight | 780 g |
Environmental Parameters
| Min Operating Temperature | 0 °C |
|---|---|
| Max Operating Temperature | 50 °C |
| Humidity Range Operating | 10 - 95% (non-condensing) |
Product features
Bringing next-generation Wi-Fi within reach
Zyxel's WAX610D is a true Wi-Fi 6 access point that delivers faster performance and massive increased capacity, which along with unique Zyxel dual-optimized antenna technology, make the user experience even better. Apart from running at faster speed, the WAX610D can also accommodate more client devices without any fall-off in speed, allowing an easy scale-up capacity to support hundreds of connections without increased latency.Advanced high-density performance
Essentially, there are two technologies that make a real difference in Wi-Fi 6 - orthogonal frequency-division multiple access (ODFMA), and spatial reuse, which is also referred to as Basic Service Set (BSS) coloring. These make Wi-Fi 6 a much more efficient technology than 802.11ac. The BSS coloring allows multiple access points to be used in the same vicinity without fear of co-channel interference.Powerful performance with dual-optimized antenna
People without RF expertise may not realize that installing an AP optimized for ceiling-mount as wall-mount may cause the ceiling-mount radiation pattern to interfere with other devices up- or downstairs as well as to deliver signals with shorter-than-expected range for its clients. Designed with the innovative dual-optimized antenna, the WAX610D adapts to both wall- and ceiling-mount installations. Thus, users can switch between the two optimized antenna modes easily to fit either situation. To boost Wi-Fi speeds for your network, the WAX610D is definitely an excellent choice.4G / 5G cellular network coexistence
With the growing pervasiveness of mobile devices in the wireless network, users start to experience degraded performance, such as ping drops and high latency, however whenever user shutdown the mobile equipment, wireless service resumes working smooth. Thus, to enable 4G / 5G cellular network coexistence and minimize interference from 4G / 5G antennas or signal boosters, the WAX610D has built-in 4G / 5G interference filters.Key selling points
- Dual-radio (dual 4x4+2x2 MIMO) 802.11ax AP provides maximum data rate of 2975 Mbps
- Dual-optimized antenna provides wall- / ceiling-mounting modes to fit in your deployment
- Advanced Cellular Coexistence minimizes interferences from 4G / 5G cellular networks
References
MPN: WAX610D-EU0101F
What our Customers think about us!
Page generated at:
04/06/2026 05:08:14